Is is possible to configure the sap.m.TimePicker to display only 15 minute intervals?
At the moment the user can enter any time they like.
It's possible now with version 1.40.+
There was incorrect information in the API documentation and it wasn't possible even on version 1.38
Change it to a DropDownBox with a value range of 00:00, 00:15, 00:30, ... 23:30, 23:45? This makes the limitation to specific intervals clear at a glance, is easy to implement and avoids entry of undesired values altogether.
While #vwegert 's answer is function I think there is a better way where you you still get the look and feel of the TimePicker.
In the source of the control there is a property minutesStep. If you can set this in the xml or js definition I think you could be onto a winner.
In fact there is a setter (yay) setMinutesStep.
oTimer.setMinutesStep(15); should be a winner for you.
Hope that helps,
Nigel
Related
need to round value from same example:
SELECT INTEGER(100-INTEGER(15692)*100/INTEGER(19590));
How can I do it on SphinxSearch
Is there any way to round value in spinxSearch (instead of adding 0.5 and flooring)
P.S for that moment find only creating custom functions
So, there is no ROUND function in Sphinx.
My solution was to change app code, and do this thing on code side, instead of Sphinx.
Also, my variant with FLOOR(x+0.5) was approved in comments, use it if you need
I am trying to set the system time in Movesense. I couldn't find an example of that, but based on the documentation I think that this should do:
asyncPut(WB_RES::LOCAL::TIME(),
AsyncRequestOptions::Empty,
(int64_t)0);
In this case, I'm just trying to reset the epoch to zero but onPutResults gives me
HTTP_CODE_BAD_REQUEST
So what is the right way?
Minimum timestamp seems to be 1483228800000000 us which corresponds to 1.1.2017. So you can't set the time to 70's as zero would set it to.
This should be documented in the yaml api but currently is not. We will add that to the list of tasks to make sure it's documented in the next release of device-lib.
I'm quite new to ELK and Grok-filtering, and I'm struggling with parsing this particular pattern in my grok filter.
I've used the grok debugger to try and solve this, but although I like the tool, I just get confused by the custom patterns.
Eventually, I hope to parse lots of log files sent by filebeat to logstash, then send the parsed logs to elasticsearch and display with kibana or some similar visualization tool.
The lines that I need to parse follow the following pattern:
1310 2017-01-01 16:48:54 [325:51] [326:49] [359:57] Some log info text
The first four digits is a log type identifier, and will be used for grouping. I've called the field "LogLineID".
The date is formatted YYYY-MM-DD HH:MM:SS, and is parsed ok. I called the field "LogDate".
But now the problem begins. Within the square brackets, I have counters, formatted as MM:SS if you like. I cannot for the life of me find a way to sort these out, but I need to compare these times, hence I want to store them as minutes and seconds, not just numbers.
The first is a counter "TimeSpent",
the second is a counter "TimeStarted" and
the third is a counter "TimeSinceDown".
Then, last, comes the info text, which I've managed to grok with simply applying %{GREEDYDATA:LogInfo}.
I notice that the amount of minutes could be far higher than the standard 60 minutes within an hour, so I may be barking up the wrong tree here trying to parse it with date patterns such as TIMESTAMP_ISO8601, but then, I don't really know how else to do this.
So, I came this far:
%{NUMBER:LogLineID} %{TIMESTAMP_ISO8601:LogDate}
and were as mentioned able to (by cutting away the square bracket parts) to parse the log info text with
%{GREEDYDATA:LogInfo}
to create a field LogInfo.
But that's were I'm stuck. Could someone please help me figure out the rest?
Massive thanks in advance.
PS! I also found %{NUMBER:duration}, but it could as far as I could tell only parse timestamps with dot, not colon..
grok regex expression can help you solve the problem.
but first I wanna make sure that do you mean [325:51] [326:49] [359:57] are the three component that you wanna to fetch? And it will returns the result like :
TimeSpent: 325:51
TimeStarted: 326:49
TimeSinceDown: 359:57
were i get the point , you can use my ways in on of the following suggestions:
define your own custom pattern files and add the pattern in your file.
just use the expression in filter part of logstash conf file
hope it will helps you
Ah, there was a space.. Actually, I was misleading myself and everybody in my question, as it was not actually that log line that was causing problems. I just took the first one, not realizing where the problem really were, but the one causing problems had a space within the brackets as such: [ 42:31]. There are also some parts where there are two spaces, so the way I managed to solve this was to include a %{SPACE} between the \[ and the %{NUMBER}:
%{NUMBER:LogLineID} %{TIMESTAMP_ISO8601:LogDate} \[%{SPACE}%{NUMBER:TimeSpentMinutes}\:%{NUMBER:TimeSpentSeconds}\] \[%{SPACE}%{NUMBER:TimeStartedMinutes}\:%{NUMBER:TimeStartedSeconds}\] \[%{SPACE}%{NUMBER:TimeSinceDownMinutes}\:%{NUMBER:TimeSinceDownSeconds}\] %{GREEDYDATA:LogText}
I still haven't solved the merging of minutes and seconds, but this I can also handle in a later stage.
Thanks to Lin Don for showing an interest in my problem, and sorry for not replying sooner.
Hope the solution will help others (or even myself) if their stuck on the same kind of problem.
Note to myself: Read the logs more carefully before grok'ing.. :)
I need to automatically generate a 12 character value for my Business Key. Without any user interaction.
8 character -> Today Date (yyyymmdd or ddmmyyyy).
+
4 character -> Sequential Number (0001,0002,0003).
The Sequential Number must reset on each new day.
Is it possible to do this in Microsoft Access 2010+ without any coding involved?
Since you are using Access 2010+ the best way to accomplish your goal would be to use a Before Change data macro like this
To create the Before Change macro, click the "Before Change" button on the "Table" tab of the ribbon when the table is open in Datasheet View:
For more details on Data Macros see
Create a data macro
Good question, thanks for the challenge!
After some search, it seems it's possible to do that.
You can prefix the AutoNuber value by processing like the explanation available here: http://www.databasedev.co.uk/add_prefix.html
You can try to specify in the format of the field a format(now(),"ddmmyyyy").
Check this page for more informations, another user seems to have the same problem and got a solution: http://bytes.com/topic/access/answers/695188-custom-made-autonumber-show-todays-date
Hope it's helping you!
Is there a function in the API that returns language description of a trigger? For example,
cron trigger expression="0 0 0 L * ?"
Language I'm looking for is "Fires at 0:00:00 every last day of the month" (Or something like that)
I want to use this to give feed back to user of what schedules are created. I'm hoping I don't have to parse the expression myself. I search Google but have came empty, maybe I'm not using the right words to search for.
I'm using the .NET version. But if there is a java function out there I could probably figure out how to port it.
Thanks in advance
There is a question similiar to this here I think your going to have to write something yourself for this.