I need to write a script that goes recursive through several hundred directories and if it finds a file beginning with "~", the hidden and system attribute should be set at that file.
So far I got this:
Get-ChildItem C:\test\~* - Recurse | foreach {$_.Attributes = 'Hidden, System'}
But it only seems to change the first file.
Use the -Filter parameter to find files beginning with ~.
Add the -File switch to exclude directories.
Remove the space between - and Recurse
This should work:
Get-ChildItem 'C:\test\' -Filter '~*' -Recurse -File | foreach {
$_.Attributes = 'Hidden, System'
}
Do something like dir c:\ -recurse | ? Name -match "~", that gets you all with the ~ in. Then set the attribute like you are.
Related
I am attempting to find recursively all files with the extension .raw and then sort them in ascending order of CreationTime. After that, I would like to copy each file to a new directory where the names are IMG_001_0001.jpg ... IMG_001_0099.jpg where I am using 4 digits in ascending order. It is important that the file name IMG_001_0001.jpg is the first one created and if there are 99 files, IMG_001_0099.jpg is the last file created.
I tried this:
Get-ChildItem 'F:\Downloads\raw-20221121T200702Z-001.zip' -Recurse -include *.raw | Sort-Object CreationTime | ForEach-Object {copy $_.FullName F:\Downloads\raw-20221121T200702Z-001.zip/test/IMG_001_$($_.ReadCount).jpg}
If I understand correctly you could do it like this:
$count = #{ Value = 0 }
Get-ChildItem 'F:\Downloads\raw-20221121T200702Z-001.zip' -Recurse -Filter *.raw |
Sort-Object CreationTime | Copy-Item -Destination {
'F:\Downloads\raw-20221121T200702Z-001.zip/test/IMG_001_{0:D4}.jpg' -f
$count['Value']++
}
Using D4 for the format string ensures your integers would be represented with 4 digits. See Custom numeric format strings for details.
As you can note, instead of using ForEach-Object to enumerate each file, this uses a delay-bind script block to generate the new names for the destination files and each source object is bound from pipeline.
Worth noting that the forward slashes in /test/ might bring problems and likely should be changed to backslashes: \test\.
You don't need a hashtable to iterate... just use [int].
For the sake of clarity please don't use paths here that can easily be mistaken for a file rather than a directory name.
Get-Childitem does not work on files and if it does it's not portable.
Also that script block for -Destination is not likely to work as parameters defined outside it are not available inside. Nor is there any need to delay anything.
Something like this should be perfectly sufficient:
$ziproot ='F:\input_folder'
$count = 0
$candidates = Get-ChildItem -Recurse -Filter '*.raw' |
Sort-Object CreationTime
ForEach($file in $candidates)
{
copy-item -source $_.FullName -Destination ('{0}/test/IMG_001_{1:D4}{2}' -f $ziproot,++$count, $_.Extension )
}
(Try using foreach($var in $list) {commands} where you can, it's faster than foreach-object by about a factor of 10.)
I want to create a script that searches through a directory for specific ".txt" files with the Get-ChildItem cmdlet and after that it copies the ".txt" to a location I want. The hard part for me is to extract specific .txt files string from the array. So basically I need help matching specific files names in the array. Here is an example of the array I'm getting back with the following cmdlet:
$arrayObject = (Get-ChildItem -recurse | Where-Object { $_.Name -eq "*.txt"}).Name
The arrayobject variable is something like this:
$arrayobject = "test.2.5.0.txt", "test.1.0.0.txt", "test.1.0.1.txt",
"test.0.1.0.txt", "test.0.1.1.txt", "test.txt"
I want to match my array so it returns the following:
test.2.5.0.txt, test.1.0.0.txt, test.1.0.1.txt
Can someone help me with Regex to match the above file names from the $arrayObject?
As you already add the -Recurse parameter to Get-ChildItem, you can also use the -Include parameter like this:
$findThese = "test.2.5.0.txt", "test.1.0.0.txt", "test.1.0.1.txt"
$filesFound = (Get-ChildItem -Path 'YOUR ROOTPATH HERE' -Recurse -File -Include $findThese).Name
P.S. without the -Recurse parameter you need to add \* to the end of the rootfolder path to be able to use -Include
Maybe something like:
$FileList = Get-ChildItem -path C:\TEMP -Include *.txt -Recurse
$TxtFiles = 'test1.txt', 'test3.txt', 'test9.txt'
Foreach ($txt in $TxtFiles) {
if ($FileList.name -contains $txt) {Write-Host File: $Txt is present}
}
A general rule: Filter as left as possible! Less objects to be processed, less resources to be used, faster to be processed!
Hope it helps!
Please try to clarify what the regex should match.
I created a regex which matches out of the given filenames only the files you wanted to retrieve:
"*.[1-9].[0-9].[0-9].txt"
You can tryout the small check I wrote.
ForEach($file in $arrayobject){
if($file -LIKE "*.[1-9].[0-9].[0-9].txt"){
Write-Host $file
}}
I think the "-LIKE" operator would be better to check if a string matches a regex.
Let me know if this helps.
Sorry for the late reply. Just got back in the office today. My question has been misinterpreted but that's my fault. I wasn't clear what I really want to do.
What I want to do is search through a directory and retrieve/extract in my case the (major)version of a filename. So in my case file "test.2.5.0.txt" would be version 2.5.0. After that I will get the MajorVersion and that's 2. Then in an If statement I would check if it's greater or equal to 1 and then copy it to a specific destination. To add some context to it. It's nupkg files and not txt. But I figured it out. This is code:
$sourceShare = "\\server1name\Share\txtfilesFolder"
destinationShare = "\\server2name\Share\txtfilesFolder"
Get-ChildItem -Path $sourceShare `
-Recurse `
-Include "*.txt" `
-Exclude #("*.nuspec", "*.sha512") `
| Foreach-Object {
$fileName = [System.IO.Path]::GetFileName($_)
[Int]$majorVersion = (([regex]::Match($fileName,"(\d+(.\d+){1,})" )).Value).Split(".")[0]
if ($majorVersion -ge 1)
{
Copy-Item -Path $_.FullName `
-Destination $destinationShare `
-Force
}
}
If you have anymore advice. Let me know. I would be great to extract the major version without using the .Split method
Grtz
I want to use PowerShell to generate a list of commands to move files from one location to another. (I'm sure PowersSell could actually do the moving, but I'd like to see the list of commands first ... and yes I know about -WhatIf).
The files are in a series of subfolders one layer down, and need moved to a corresponding series of subfolders on another host. The subfolders have 8-digit identifiers. I need a series of commands like
move c:\certs\40139686\22_05_2018_16_23_Tyre-Calligraphy.jpg \\vcintra2012\images\40139686\Import\22_05_2018_16_23_Tyre-Calligraphy.jpg
move c:\certs\40152609\19_02_2018_11_34_Express.JPG \\vcintra2012\images\40152609\Import\19_02_2018_11_34_Express.JPG
The file needs to go into the \Import subdirectory of the corresponding 8-digit-identifier folder.
The following Powershell will generate the data that I need
dir -Directory |
Select -ExpandProperty Name |
dir -File |
Select-Object -Property Name, #{N='Parent';E={$_.Directory -replace 'C:\\certs\\', ''}}
40139686 22_05_2018_16_23_Tyre-Calligraphy.jpg
40152609 19_02_2018_11_34_Express.JPG
40152609 Express.JPG
40180489 27_11_2018_11_09_Appointment tuesday 5th.jpg
but I am stuck on how to take that data and generate the concatenated string which in PHP would look like this
move c:\certs\$Parent\$Name \\vcintra2012\images\$Parent\Import\$Name
(OK, the backslashes would likely need escaped but hopefully it is clear what I want)
I just don't know to do this sort of concatenation of columnar output - any SO refs I look at e.g.
How do I concatenate strings and variables in PowerShell?
are not about how to do this.
I think I need to pipe the output to an expression that effects the concatenation, perhaps using -join, but I don't know how to refer to $Parent and $Name on the far side of the pipe?
Pipe your output into a ForEach-Object loop where you build the command strings using the format operator (-f):
... | ForEach-Object {
'move c:\certs\{0}\{1} \\vcintra2012\images\{0}\Import\{1}' -f $_.Parent, $_.Name
}
Another approach:
$source = 'C:\certs'
$destination = '\\vcintra2012\images'
Get-ChildItem -Path $source -Depth 1 -Recurse -File | ForEach-Object {
$targetPath = [System.IO.Path]::Combine($destination, $_.Directory.Name , 'Import')
if (!(Test-Path -Path $targetPath -PathType Container)) {
New-Item -Path $targetPath -ItemType Directory | Out-Null
}
$_ | Move-Item -Destination $targetPath
}
I have a source tree, say c:\s, with many sub-folders. One of the sub-folders is called "c:\s\Includes" which can contain one or more .cs files recursively.
I want to make sure that none of the .cs files in the c:\s\Includes... path exist in any other folder under c:\s, recursively.
I wrote the following PowerShell script which works, but I'm not sure if there's an easier way to do it. I've had less than 24 hours experience with PowerShell so I have a feeling there's a better way.
I can assume at least PowerShell 3 being used.
I will accept any answer that improves my script, but I'll wait a few days before accepting the answer. When I say "improve", I mean it makes it shorter, more elegant or with better performance.
Any help from anyone would be greatly appreciated.
The current code:
$excludeFolder = "Includes"
$h = #{}
foreach ($i in ls $pwd.path *.cs -r -file | ? DirectoryName -notlike ("*\" + $excludeFolder + "\*")) { $h[$i.Name]=$i.DirectoryName }
ls ($pwd.path + "\" + $excludeFolder) *.cs -r -file | ? { $h.Contains($_.Name) } | Select #{Name="Duplicate";Expression={$h[$_.Name] + " has file with same name as " + $_.Fullname}}
1
I stared at this for a while, determined to write it without studying the existing answers, but I'd already glanced at the first sentence of Matt's answer mentioning Group-Object. After some different approaches, I get basically the same answer, except his is long-form and robust with regex character escaping and setup variables, mine is terse because you asked for shorter answers and because that's more fun.
$inc = '^c:\\s\\includes'
$cs = (gci -R 'c:\s' -File -I *.cs) | group name
$nopes = $cs |?{($_.Group.FullName -notmatch $inc)-and($_.Group.FullName -match $inc)}
$nopes | % {$_.Name; $_.Group.FullName}
Example output:
someFile.cs
c:\s\includes\wherever\someFile.cs
c:\s\lib\factories\alt\someFile.cs
c:\s\contrib\users\aa\testing\someFile.cs
The concept is:
Get all the .cs files in the whole source tree
Split them into groups of {filename: {files which share this filename}}
For each group, keep only those where the set of files contains any file with a path that matches the include folder and contains any file with a path that does not match the includes folder. This step covers
duplicates (if a file only exists once it cannot pass both tests)
duplicates across the {includes/not-includes} divide, instead of being duplicated within one branch
handles triplicates, n-tuplicates, as well.
Edit: I added the ^ to $inc to say it has to match at the start of the string, so the regex engine can fail faster for paths that don't match. Maybe this counts as premature optimization.
2
After that pretty dense attempt, the shape of a cleaner answer is much much easier:
Get all the files, split them into include, not-include arrays.
Nested for-loop testing every file against every other file.
Longer, but enormously quicker to write (it runs slower, though) and I imagine easier to read for someone who doesn't know what it does.
$sourceTree = 'c:\\s'
$allFiles = Get-ChildItem $sourceTree -Include '*.cs' -File -Recurse
$includeFiles = $allFiles | where FullName -imatch "$($sourceTree)\\includes"
$otherFiles = $allFiles | where FullName -inotmatch "$($sourceTree)\\includes"
foreach ($incFile in $includeFiles) {
foreach ($oFile in $otherFiles) {
if ($incFile.Name -ieq $oFile.Name) {
write "$($incFile.Name) clash"
write "* $($incFile.FullName)"
write "* $($oFile.FullName)"
write "`n"
}
}
}
3
Because code-golf is fun. If the hashtables are faster, what about this even less tested one-liner...
$h=#{};gci c:\s -R -file -Filt *.cs|%{$h[$_.Name]+=#($_.FullName)};$h.Values|?{$_.Count-gt1-and$_-like'c:\s\includes*'}
Edit: explanation of this version: It's doing much the same solution approach as version 1, but the grouping operation happens explicitly in the hashtable. The shape of the hashtable becomes:
$h = {
'fileA.cs': #('c:\cs\wherever\fileA.cs', 'c:\cs\includes\fileA.cs'),
'file2.cs': #('c:\cs\somewhere\file2.cs'),
'file3.cs': #('c:\cs\includes\file3.cs', 'c:\cs\x\file3.cs', 'c:\cs\z\file3.cs')
}
It hits the disk once for all the .cs files, iterates the whole list to build the hashtable. I don't think it can do less work than this for that bit.
It uses +=, so it can add files to the existing array for that filename, otherwise it would overwrite each of the hashtable lists and they would be one item long for only the most recently seen file.
It uses #() - because when it hits a filename for the first time, $h[$_.Name] won't return anything, and the script needs put an array into the hashtable at first, not a string. If it was +=$_.FullName then the first file would go into the hashtable as a string and the += next time would do string concatenation and that's no use to me. This forces the first file in the hashtable to start an array by forcing every file to be a one item array. The least-code way to get this result is with +=#(..) but that churn of creating throwaway arrays for every single file is needless work. Maybe changing it to longer code which does less array creation would help?
Changing the section
%{$h[$_.Name]+=#($_.FullName)}
to something like
%{if (!$h.ContainsKey($_.Name)){$h[$_.Name]=#()};$h[$_.Name]+=$_.FullName}
(I'm guessing, I don't have much intuition for what's most likely to be slow PowerShell code, and haven't tested).
After that, using h.Values isn't going over every file for a second time, it's going over every array in the hashtable - one per unique filename. That's got to happen to check the array size and prune the not-duplicates, but the -and operation short circuits - when the Count -gt 1 fails, the so the bit on the right checking the path name doesn't run.
If the array has two or more files in it, the -and $_ -like ... executes and pattern matches to see if at least one of the duplicates is in the includes path. (Bug: if all the duplicates are in c:\cs\includes and none anywhere else, it will still show them).
--
4
This is edited version 3 with the hashtable initialization tweak, and now it keeps track of seen files in $s, and then only considers those it's seen more than once.
$h=#{};$s=#{};gci 'c:\s' -R -file -Filt *.cs|%{if($h.ContainsKey($_.Name)){$s[$_.Name]=1}else{$h[$_.Name]=#()}$h[$_.Name]+=$_.FullName};$s.Keys|%{if ($h[$_]-like 'c:\s\includes*'){$h[$_]}}
Assuming it works, that's what it does, anyway.
--
Edit branch of topic; I keep thinking there ought to be a way to do this with the things in the System.Data namespace. Anyone know if you can connect System.Data.DataTable().ReadXML() to gci | ConvertTo-Xml without reams of boilerplate?
I'd do more or less the same, except I'd build the hashtable from the contents of the includes folder and then run over everything else to check for duplicates:
$root = 'C:\s'
$includes = "$root\includes"
$includeList = #{}
Get-ChildItem -Path $includes -Filter '*.cs' -Recurse -File |
% { $includeList[$_.Name] = $_.DirectoryName }
Get-ChildItem -Path $root -Filter '*.cs' -Recurse -File |
? { $_.FullName -notlike "$includes\*" -and $includeList.Contains($_.Name) } |
% { "Duplicate of '{0}': {1}" -f $includeList[$_.Name], $_.FullName }
I'm not as impressed with this as I would like but I thought that Group-Object might have a place in this question so I present the following:
$base = 'C:\s'
$unique = "$base\includes"
$extension = "*.cs"
Get-ChildItem -Path $base -Filter $extension -Recurse |
Group-Object $_.Name |
Where-Object{($_.Count -gt 1) -and (($_.Group).FullName -match [regex]::Escape($unique))} |
ForEach-Object {
$filename = $_.Name
($_.Group).FullName -notmatch [regex]::Escape($unique) | ForEach-Object{
"'{0}' has file with same name as '{1}'" -f (Split-Path $_),$filename
}
}
Collect all the files with the extension filter $extension. Group the files based on their names. Then of those groups find every group where there are more than one of that particular file and one of the group members is at least in the directory $unique. Take those groups and print out all the files that are not from the unique directory.
From Comment
For what its worth this is what I used for testing to create a bunch of files. (I know the folder 9 is empty)
$base = "E:\Temp\dev\cs"
Remove-Item "$base\*" -Recurse -Force
0..9 | %{[void](New-Item -ItemType directory "$base\$_")}
1..1000 | %{
$number = Get-Random -Minimum 1 -Maximum 100
$folder = Get-Random -Minimum 0 -Maximum 9
[void](New-Item -Path $base\$folder -ItemType File -Name "$number.txt" -Force)
}
After looking at all the others, I thought I would try a different approach.
$includes = "C:\s\includes"
$root = "C:\s"
# First script
Measure-Command {
[string[]]$filter = ls $includes -Filter *.cs -Recurse | % name
ls $root -include $filter -Recurse -Filter *.cs |
Where-object{$_.FullName -notlike "$includes*"}
}
# Second Script
Measure-Command {
$filter2 = ls $includes -Filter *.cs -Recurse
ls $root -Recurse -Filter *.cs |
Where-object{$filter2.name -eq $_.name -and $_.FullName -notlike "$includes*"}
}
In my first script, I get all the include files into a string array. Then i use that string array as a include param on the get-childitem. In the end, I filter out the include folder from the results.
In my second script, I enumerate everything and then filter after the pipe.
Remove the measure-command to see the results. I was using that to check the speed. With my dataset, the first one was 40% faster.
$FilesToFind = Get-ChildItem -Recurse 'c:\s\includes' -File -Include *.cs | Select Name
Get-ChildItem -Recurse C:\S -File -Include *.cs | ? { $_.Name -in $FilesToFind -and $_.Directory -notmatch '^c:\s\includes' } | Select Name, Directory
Create a list of file names to look for.
Find all files that are in the list but not part of the directory the list was generated from
Print their name and directory
Today I started scripting in Windows PowerShell - so please excuse my "dumbness"...
I want to create txt-Files with the name of the subfolders of each "rootfolder" on drive G:. On G:\ I have the following folders:
1_data
2_IT_area
3_personal
4_apprenticeship
7_backup
8_archives
9_user_profile
So I wrote this script:
get-childitem G:\ | ForEach-Object -process {gci $_.fullName -R} | WHERE {$_.PSIsContainer} > T:\listing\fileListing+$_.Name+.txt
But the script isn't doing what I want - it's creating only one text file.. can u help me? I already tried it as described here >> http://www.powershellpro.com/powershell-tutorial-introduction/variables-arrays-hashes/ "T:\listing\$_.Name.txt" - doesn't work as well...
Thank u very much for your Help!
-Patrick
This should do what you want:
Get-ChildItem G:\ | Where {$_.PSIsContainer} |
Foreach {$filename = "T:\fileListing_$($_.Name).txt";
Get-ChildItem $_ -Recurse > $filename}
And if typing this interactively (using aliases):
gci G:\ | ?{$_.PSIsContainer} | %{$fn = "T:\fileListing_$($_.Name).txt";
gci $_ -r > $fn}
The $_ special variable is typically only valid within a scriptblock { ... } either for a Foreach-Object, Where-Object, or any other pipeline related scriptblock. So the following filename construction T:\listing\fileListing+$_.Name+.txt isn't quite right. Typically you would expand a variable inside a string like so:
$name = "John"
"His name is $name"
However when you're accessing a member of an object like with $_.Name then you need to be able to execute an expression within the string. You can do that using the subexpression operator $() e.g.:
"T:\listing\fileListing_$($_.Name).txt"
All that filename string construction aside, you can't use $_ outside a scriptblock. So you just move the filename construction inside the Foreach scriptblock. Then create that file with the contents of the associated dir redirected to that filename - which will create the file.