Under any two years recent version of MATLAB, I am looking for the path of the current script being executed (ref.1, 2, 3, 4, 5),
Let's say, for a script through any of the following user procedures, in general, when a user runs a script:
The "Run", "Run and Advance", "Run Section" or "Run and Time" menu buttons,
The "Evaluate Selection" or "Evaluate Current Selection" contextual menus from the Editor,
The F9 or Ctrl+Enter keyboard shortcuts from the Editor.
User procedures that could not be accepted by the solution, because there would be no associated script, are:
Executing a piece of code directly in the command line,
The contextual or keyboard shortcuts for executing a code from a Matlab interface or windows outside the Editor -Document, Browser, Help.
User procedures out of the scope of the question related to functions, which could be solved easily through any of the following indicated solutions, is:
Calling the script as a function from the command line, from another script or from a function.
This is not for a function, which is trivially done through any of the following alternatives:
mfilename
mfilename('fullpath')
which(mfilename)
which('mfilename')
S = dbstack('-completenames');S(1).file
[folder,name,ext] = fileparts(which('object'))
And this is of course not the same that requesting the current folder through:
cd
pwd
edit I misunderstood the question initially...
So with hopefully a bit better understanding you could try and utilise:
matlab.desktop.editor.getActiveFilename
to get the current active file in the editor -> which should give the current script...
Note: this is an undocumented function which may change between releases -> it gives me the active filename in r2015b.
Related
I've recently upgraded PowerShell to version 7.3.0 version and now, when I type a command, I see its suggestions like when I'm typing pip it adds list like in this image. Or when I type start of the command it suggests its full name.
The problem is that when I press Tab it doesn't complete the command, instead it just starts listing current directories, i.e. here is an image after pressing Tab once.
Also even when I start typing the full name of the command like pip li it still shows the ending, but when pressing Tab it just does nothing.
I expected this to complete the current command with the suggestion after Tab is pressed.
I've tried to google this problem but haven't found the exact same case I have with 7.3.0 version.
Just press -> (right arrow) key
If you want to change key bindings:
source: https://devblogs.microsoft.com/powershell/announcing-psreadline-2-1-with-predictive-intellisense/
Key Bindings for Predictions
Key bindings control cursor movement and additional features within the prediction. To support users running Predictive IntelliSense on multiple platforms, key bindings are user-settable from the command line or your profile script.
PSReadLine contains functions to navigate and accept predictions. As an example, to accept a displayed prediction, PSReadLine contains functions:
AcceptSuggestion – Accept the current inline suggestion
AcceptNextSuggestionWord – Accept the next word of the inline suggestion
AcceptSuggestion is built within ForwardChar, which by default is bound to RightArrow. Pressing RightArrow accepts an inline suggestion when the cursor is at the end of the current line.
AcceptNextSuggestionWord is built within the function ForwardWord, which can be bound with Ctrl+f by Set-PSReadLineKeyHandler -Chord "Ctrl+f" -Function ForwardWord. Pressing Ctrl+f accepts the next word of an inline suggestion when the cursor is at the end of current editing line.
As a user, you can bound other keys to AcceptSuggestion and AcceptNextSuggestionWord for similar functionalities. Search for ForwardCharAndAcceptNextSuggestionWord in SamplePSReadLineProfile.ps1 for an example to make RightArrow accept the next word from inline suggestion, instead of the whole suggestion line.
List of additional suggested key bindings defined in PSReadLine SamplePSReadLineProfile.ps1
Good Day.
I am a hobby programmer, and am just looking for creative ways to get things done.
In particular, closing a tab or tabs in sublimetext3 through a cmd line method.
The even cooler thing would be, if so, is there a way to decide in cmd which tab to close e.g. 3rd from left/right etc?
In keeping with the idea that this is mostly curiosity and preference than anything else, so creative replies are definitely appreciated as well.
You can execute any command* from the command line, so this is very much possible.
For example, to close the active tab of the most recently used Sublime Text window, you can run subl --command close.
To close a specific tab, for example the 18th tab, which will have index 17 because it is zero-based:
subl --command 'close_by_index {"group": 0, "index": 17}'
(This is assuming bash syntax - for Windows cmd syntax, you may need to do some creative escaping because the command arguments have to be valid JSON and quoted as part of the same argument as the name of the command you want to execute.)
This is exactly the same command that would be run when right-clicking on the tab and picking Close Tab in the context menu. This command can be seen by inspecting Packages/Default/Tab Context.sublime-menu using the built-in View Package File functionality in the Command Palette. You can check this file to see other pre-defined entries like closing all other tabs, or tabs to the right etc.
*: Caveats being if ST is not already running, then it tries to run the command before plugins are loaded.
I use the plugin SimpleSession with Sublime Text 3 (but any plugin could be considered). If I save a session with multiple windows, this creates a .simplesession file. How can I open that session file just by clicking on the file? The goal is to avoid having to launch ST3 and use the Command Palette to run the "Load Session" command. Currently, clicking on the .simplesession file causes ST3 to open it as a regular file.
Sublime doesn't know that a simplesession file is important in any way, so double clicking on one is going to open it the same as Sublime would open any other file.
Since it's a plugin that created the file, that plugin is the only thing that knows that it's special and what to do with it. So what you really need is the way to tell the plugin to take the action for you.
All actions in Sublime (including things as simple as inserting text) are taken by executing a command. Here that would be a command in the plugin that created the file in question, which would tell it that you want to carry out the action you would normally take manually, such as loading a session.
To do that from within Sublime you'd do something like bind a keyboard key to the appropriate command, add it to a menu, the command palette, etc. If you want to take the action from outside of Sublime, then you need to communicate that command to Sublime in order to get it to execute.
In core Sublime you can do this by executing the subl program that ships with Sublime and tell it a plugin command that you would like to execute.
Although it's possible to do this, the solution provided here has the requirement that Sublime already be running due to technical limitations within Sublime itself, but more on that in a moment.
This answer will give you the information that you need to formulate the command line that you need to execute in order to get the plugin command to run and carry out the action that you desire.
If you want to run this command in response to double clicking a file of a particular type (here a simplesession file), how you do that is specific to the operating system and file browser that you're using, and is best asked as a separate question.
Assuming you instead want a level of integration where you just have a desktop shortcut, start menu entry, etc that does this, this is more straight forward because such a shortcut is really just a visual wrapper that executes a command of your choosing.
Again, how you would do that is different depending on your OS, but the important part is knowing what full command line you need to give to the shortcut to be able to run it, which is what this answer tells you how to construct.
Important Note: The specific package in your question implements a load_session command, which prompts you for the session to load from a list of sessions you've previously created.
This command doesn't take any argument that would tell it what session to load without asking you to pick one first. As a result, what you want isn't technically possible without more work because there's no way to directly tell the load_session command the file that you want to open.
In order to more fully automate things in this particular case, the underlying package needs to be modified. In particular either the load_session command would need an optional argument which, when given, would cause it to load that session without prompting first, or
a new command would need to be created to do the same thing.
If you're not comfortable or knowledgeable enough to make such modifications to the package directly, you need to either find someone that will do that for you or (even better) discuss it with the package author, since that is a feature that others would probably enjoy as well.
The first thing you need to know is, "What command in the plugin is the one that I need to execute to do what I want?". In some cases you may already know exactly what command you need to use because it's documented, or you have already made a custom key binding for it, and so on.
If you don't know the command you need to use, check the documentation on the package (if any) to see if it mentions them. In your particular case, the README on the package page specifically mentions a list of commands, of which load_session seems like the most appropriate fit.
Lacking any documentation, the next easiest thing to do would be to ask Sublime directly. To do this, select View > Show Console from the menu or press the keyboard shortcut associated with it, Ctrl+`. In the console that appears, enter the following command and press enter.
sublime.log_commands(True)
Now whenever you do anything, this console is going to show you exactly what command Sublime is executing, along with any arguments that it may be passing to the command. This remains in effect until you use the same command with False or restart Sublime.
With logging turned on, select the appropriate command from the command palette and see what the Console says.
For example, with this package installed, I get output like the following:
>>> sublime.log_commands(True)
command: show_overlay {"overlay": "command_palette"}
command: load_session
This is showing two commands; first I opened the command palette which uses the show_overlay command, and then I selected the SimpleSession: Load command, which is the load_session command with no arguments.
In order to get Sublime to execute the command from the command line, you use the --command command line argument to subl. So in order to get Sublime to run the load_session command, you can enter the following command in a command prompt/terminal in your OS. This is also the command you would set in your desktop shortcut.
subl --command "load_session"
This presumes that you've set up Sublime so that it's in the path (how you do that is OS specific). If running subl in a terminal gives you an error about a missing command, either add the Sublime install directory to the path or use a fully qualified file name in place of subl (e,g. "C:\Program Files\Sublime Text 3\subl" if you're on Windows); either requires you to know what location Sublime is installed in.
If you want to use a command that takes arguments you need to include the arguments in the command as well, in the same way as they were displayed in the console above.
It's important that the command name and the arguments all be considered one command line argument, which requires you to wrap the whole thing in quote characters, since otherwise the spaces will make it appear as multiple arguments.
If you forget this, Sublime will respond by opening files named after the different parts of the command and arguments that you tried to open under the mistaken belief that you're giving it files to open.
As a concrete example, to get Sublime to open the command palette from outside of Sublime, the command to do this would look like the following if you were on Linux/MacOS:
subl --command 'show_overlay {"overlay": "command_palette"}'
Note again that we are passing exactly what the console showed above, but the whole thing, command and arguments, are wrapped in single quotes so that the terminal knows that the entire value is one argument.
This makes things a little tricky on Windows, which doesn't allow single quotes. On that platform you need to use double quotes instead. This requires you to "quote" the internal double quotes with a leading \ character so that the command processor knows that they're part of the argument and not the double quote that ends the argument.
For the case of opening the command palette on Windows, the command thus looks like this:
subl --command "show_overlay {\"overlay\": \"command_palette\"}"
With this information in hand, you can set up something like a desktop shortcut to run the appropriate command, or potentially set up the file explorer that you're using to execute a command specifically when you double click on a file of your choosing.
Again, how you would do that is specific to the operating system that you're using, and so I'm not really covering that in depth here in this answer. Just keep in mind that regardless of the OS in question, the part that remains the same is that you need to use subl command like the above.
Now, in your particular case, if the package that you're using provided a command that would let it load the session directly without prompting you first, the command that you use would need to also include the name of the session file as one of the command arguments.
However, as I mentioned above, this package doesn't currently allow that at the moment.
Now, here is the GIANT CAVEAT with this whole thing; this only works if Sublime is already running.
The subl command talks to an existing running copy of Sublime and gives it commands to open a file, directory, run a command as we're doing here, and so on. If Sublime isn't already running, then subl will start Sublime first and then communicate these details to it.
Sublime starts and makes it's interface available to you to work right away, and then starts to load packages and plugins in the background. This is to get you in and working on your files without having to wait for all packages to load first.
An issue with this is that as soon as Sublime starts, subl passes off the appropriate commands and then quits, and since packages aren't loaded yet, the command that you want to execute doesn't exist yet (hasn't been loaded), so nothing actually happens.
Unfortunately there's not really a satisfactory way around this particular issue if you want to start Sublime and also execute commands.
A potential workaround would be use something like a script or batch file that would check to see if Sublime is already running, and if not Start it and delay a little bit to allow plugins to finish loading, then use subl to run the command.
However this would require you to basically guess how long it takes Sublime to finish loading, which is less than ideal.
This is weird.
I know tab is for command completion in the PowerShell ISE and fine so. But, it also messes up the editing pane.
Do this:
File > New (Untitled1.ps1 opens)
Press tab (all fine, you get an indent)
type enter, # (comment) and press tab after it
expected: one would get indentation after the hash
actual: one gets the hash replaced by $PSVersionTable or whatever the command prompt has in its history! (tab and Shift-tab circle through those)
Does this mean no-one uses tabs within comments in PowerShell scripts, or that no-one uses comments in PowerShell scripts?
Can I turn off this behavior anywhere?
Also, the behavior seems to be inconsistent. If I e.g. type ##, sometimes tab does not do the completion (it does not enter a tab either).
Can others reproduce this?
System:
Windows 8.1 Pro
PowerShell ISE
To answer the main question, you can enter Alt+09 (using numeric keypad) to enter <Tab>.
For the behavior described, I see this as expected behavior. You can get history completion by typing # and part of a previous command then pressing Tab repeatedly will cycle backwards through matching history. Typing # alone will match all history starting with the last command.
Does this mean no-one uses tabs within comments in PowerShell scripts?
Anecdotal, but I've never used tabs in a single line comment, but I do often use tabs within multiline comments which are bracketed by <# and #>. E.g.
<#
Functions
Get-Foo
Get-Bar
Variables
$Foo
$Bar
#>
Function Get-Foo { ...
With multiline comments, the auto-completion will not be an issue.
, or that no-one uses comments in PowerShell scripts?
I don't know why this would be implied by the behavior; I always use a single space to start a line comment.
I find this helpful when developing a script as I often try expressions in the command pane if I'm unsure of the behavior, then add the expression to the script if it works.
So, my workflow would be:
Ctrl-D to go to the Command Pane
Type a command
If the command did what I wanted, Ctrl-I to go to the Script Pane
Type #<Tab>, and the line is added to the script.
I'm running Matlab 2013a, under Linux, using Xmonad (using the XMonad.Config.Xfce package).
This problem occurs whether the command window is docked or not.
The command window prompt does not get the keyboard focus unless the pointer is located
over the command window.
Is there a way to get the Matlab command window to have focus behaviour just like other normal windows, like a terminal?
Most important: I'd like to have the keyboard focus follow the window focus,
and not require any special positioning of the pointer, so that I can just "Alt-Tab" around my windows and have the command window get the keyboard focus. All of the resources I've found so far relate to programmatic control of focus; I'm just trying to improve my user experience in an interactive session.
To get keyboard focus on the Command Window, include the following in your xmonad.hs
import XMonad.Hooks.SetWMName
import XMonad.Hooks.ManageHelpers
and configure your ManageHook as follows
myManageHook = composeAll . concat $
[ [appName =? a --> doCenterFloat | a <- myFloatAS ]
, (your other hooks)
] where
myFloatAS = ["MATLAB"]
Finally, include setWMName "LG3D" in your startupHook. See here for a full xmonad.hs configuration which uses this (this is where I found the solution). If you have other Java apps that don't get focus as they should you can add them to the myFloatAS list.
It's a problem in the built-in java.
If i run:
export MATLAB_JAVA=/usr/lib/jvm/java-7-openjdk/jre
matlab -desktop
Matlab works as expected.
I ran into this problem, running MATLAB2014a. I set up setWMName "LG3D" but still i couldn't get focus on my window. I had to click on the focused window to get the cursor, and sometimes the situation was even worse and I had to click on random places till i get my cursor back. This wouldn't happen on MATLAB2010. What worked for me was to use the native version of java as describe above.
In the end, i used the following bash script to start matlab8:
#!/bin/bash
export MATLAB_JAVA=/usr/lib/jvm/java-7-openjdk-amd64/jre/
/usr/local/bin/matlab8 -desktop -nosplash