I create repository by TortoiseSVN and when I want to share project in eclipse
(left click on class -> team ->share project-> I choose SVN -> url: file///my repo ) I have mistakes:
Share project was failed.
svn: E180001: Unable to open an ra_local session to URL
svn: E180001: Unable to open repository
'file:///C:/SVN/MyNewRepository'
svn: E125006: 'C:\SVN\MyNewRepository\db\format' contains invalid
filesystem format option 'addressing logical'
What I should do? Please give me some advice because I can't add anything in my repo
Install a Subversion server and access your repositories over HTTP(S) to solve the problem.
You are getting this error because there is a mix up of Subversion versions in TortoiseSVN and Eclipse. TortoiseSVN 1.9 creates SVN repository in SVN 1.9 format and Eclipse that's using non-standard Subversion client of older version (1.8 or older), does not support accessing this repository directly through file:// access.
Related
I am trying to add repository WSIG to Eclipse but i get this error unable to load default SVN client.
link WSIG repository in github
Yes as explained above you'll need a Eclipse Plugin to clone the git repository.
Or Install latest eclipse from here and use the already installed plugin.
But as it is mentioned it a GIT repo not SVN thus SVN plugin will not work.
First of all the repository you're trying to clone (in git terms) or checkout (in SVN) is a GIT repository. That means, it uses Git as its version control system.
Thus, you cannot use SVN plugin for that, for basic understanding you can go through here.
Also on github there are ample of ways to get hands-on on Git , which I'll recommend before you actually start working using Git.
Here is the link : https://try.github.io/
Now, for your question you have to do as below for importing in eclipse :
First see , whether you have EGit plugin already installed in your eclipse if not please get this installed, as :
Once thats setup, then Goto --> Import -> Git --> Projects from Git
Then Clone URI
Then add your project link which you see on git hub as :
now paste the URL here. Since we selected http while copying from Github then choose same here as below :
Now feed your user credential and you are all set.
If you still face any difficulty within above steps, there is good documentation with images here as well : https://www.vogella.com/tutorials/EclipseGit/article.html#github
Hope this helps.
I've had Subclipse set up and working correctly. Recently I needed to create a 2nd repository in SVN for another project in a separate Eclipse workspace. Up to this point my dav_svn.conf file was setup to only provide access to the first repository. So I created the new repository. Then I enabled the SVNParentPath and SVNListParentPath directives, did not change the <Location URL>, and verified that it was working ok by just using my web browser on the client PC and everything was great.
But when I tested it in Eclipse, if I use the SVN Repository Exploring view, Subclipse insists that the repository can't be found - none of the Team functions work. Nor will it list the other repository that should be available at that URL if I just try to create a new repository.
Do I need to relocate the repository via SVN Repository Exploring View? (despite the dire warnings) Or is there actually something wrong with Subclipse?
I'm using Eclipse 3.7.2 on Ubuntu 12.04, along with:
org.tigris.subversion.clientadapter.feature (1.8.6) "Subversion Client Adapter"
org.tigris.subversion.clientadapter.javahl.feature (1.7.10) "Subversion JavaHL"
org.tigris.subversion.clientadapter.svnkit.feature (1.7.9.2) "SVNKit Client Adapter"
org.tigris.subversion.subclipse (1.8.22) "SVN Team Provider Core"
org.tigris.subversion.subclipse.graph.feature (1.1.1) "Subversion Revision Graph"
the subversion repository is hosted on a Ubuntu server (10.04 LTS) and being served via Apache using the dav_svn 'plugin'.
Most likely the URL for the repository has changed, so yes you would need to take the Relocate option so that you can update the URL. Note that you have to give Subclipse the URL to one of your repositories, not to the parent path. No SVN client will accept the URL to the parent. So, for example, the URL needs to be:
http://server.com/svn/repos
not -
http://server.com/svn
I do not believe the message when you do Relocate is "dire" it is just letting you know what it is going to do.
I had a working kepler eclipse on Ubuntu 13.04, x86_64.
Subversion svn, version 1.7.8.
I had several projects in my workspace.
The actual storage was set up on disk as:
top:
ProjA
ProjB
ProjC
where the different projects where checked out of the subversion repository separately, even though "top" was in the repository, as was top/ProjA, top/ProjB, etc.
I then moved the whole mess to a backup directory and checked out the repository fresh so that each of the project directories were proper subversion subdirectories under top, which is now checked out as a proper subversion directory.
I then copied in the .metadata, .settings, and .project files & directories into the new structure and started eclipse. I get the following message:
SVN: '0x00000000: Open Project' operation finished with error: 0x00000000: Unable connect to 'perl' project.
Please check that SVN meta-information exists and its format is supported by the current SVN plug-in version.
If so, it is possible that project working copy is relocated outside plug-in control.
At the current moment project will be automatically disconnected from source control.
0x00000000: Unable connect to 'perl' project.
Please check that SVN meta-information exists and its format is supported by the current SVN plug-in version.
If so, it is possible that project working copy is relocated outside plug-in control.
At the current moment project will be automatically disconnected from source control.
Which is expected, because the old directory structure had the svn info in each of the project directories, and now it's located higher up in the tree.
However, when I try to reconnect the project (right-click project, Team->Share Project) to the repository, the Share Project Wizard correctly finds the repository path, selects Simple Mode to connect to the correct URL, but I get the message:
Share Project
The Project "perl" already exists in repository and has some content.
To connect the local project to the specified location, the repository
folder content should be checked out. Please consider that applying
local changes can cause resource conflicts..."
Do you wish to proceed?
I click "Yes", and get:
Share project was failed.
svn: E200030: CANTOPEN
Any idea on how to proceed?
Configuration:
Team SVN Connector: SVNKit 1.7.9
Subversion svn, version 1.7.8.
I have this kind of problem. In my case, it seems projects are disconnected if there are some latency to access the file (eg network).
After some investigations, the subversive plugin is no more a production tool, and is no more supported....
I am using Eclipse GIT (EGIT) to check out from
https://github.com/SpringSource/spring-mvc-showcase
After trying to clone the repository I am receiving the error:
https://github.com/SpringSource/spring-mvc-showcase: https://github.com/SpringSource/spring-mvc-showcase /info/refs?service=git-upload-pack not found
Please, check
Network Connection settings
Network Connection -> SSH2 Eclipse Preference
This error is caused by not having the latest version of git due to updates in the server-side application. I recommend trying to access it through a different protocol (git:// or ftp) if possible. Otherwise, just check for updates in the egit plugin.
Update:
I have learned for a fact that github supports the git protocol. You can use
git://github.com/SpringSource/spring-mvc-showcase.git
as the repository. (If egit asks for a protocol separately from the URL, change it from https to git).
I'm trying to use the relocate function in Eclipse to switch the svn server my projects are looking at. I open the SVN Repositories view, right click the repository, choose relocate, type in the new url, and it just keeps spitting back:
org.tigris.subversion.javahl.ClientException: svn: Server does not support retrieving information about the root repository
I used to get the same error with the old server when I would check things out, but it would always pull up the directory listing regardless. If I add the new location in the SVN Repositories, I can browse it just fine. What am I doing wrong here?
I'm using Subclipse Integration for Mylyn 3.0.0 in Eclipse 3.5.2. I also have
Subversion Client Adapter 1.5.3
Subversion JavaHL 1.5.7
Subversion Revision Graph 1.0.7
SVN Team Provider Core 1.4.8
SVNKit Client Adapter 1.5.6.1
The SVN server we were using was a lil' out of date, so it wasn't supporting a request we were sending it. When Eclipse didn't get the reply it wanted, it failed and continued to go any further. I suppose the fix to this would be to upgrade your SVN server, but all we did was pointed DNS from the old server to the new server.