I'm using GA's Core Reporting API to create a report that shows the top exit pages alongside some behavioural metrics for each page. The dimension is ga:exitPagePath, and the metrics I want are:
ga:exits
ga:pageviews
ga:entrances
ga:avgTimeOnPage
ga:bounceRate
ga:exitRate
I'm sorting by -ga:exits. I'm not using any filters or segments.
The query appears to work fine, it doesn't return an error - however the entrances values it returns are incorrect and exactly match the exit values for each page. Other queries for ga:entrances without ga:exits give the correct entrance values.
I may have overlooked it but I can't find anywhere in the documentation indicating that these metrics can't be used together. I also tested creating a custom report within the GA interface with these two metrics and found the same result - no error or indication that I can't create a report with both metrics, but entrances incorrectly reported and exactly matching the exit values. I also get the same result in GA's Query Explorer.
Would love to work this out - it seems perfectly logical to me to want to view entrances alongside exits for exit pages :)
A better late than never response.
It makes sense, because all users that have visited your site (entrances) have left (exits).
It gets meaningful when using it along with the pages (ga:pagePath for example).
Related
I'm using Grafana v9.1.8.
I created a panel bases on data from influxdb.
The data only sent when application is working, so sometimes there is no data.
And the dashboard will show just 'No Data' in the middile of the panel without any graph.
I'm trying to keep the graph(axis) shown even if there's no data, but I cannot find the solution.
As far as I know, there is no such feature on Grafana at the moment, but I found this solution:
https://community.grafana.com/t/what-to-show-when-the-panel-is-without-data/66524/9
Make a fake union, check if you have any data and if you don't create some random time data without other parameters. As they say in the answer, this may not be scalable, as you need to add extra lines for each query, but it may be a workaround.
We have a custom implementation of the SmartSheet Bridge which is returning the following error in our Run Log:
"The value for cell in column 3928364019935108, INPUT, did not conform to the strict requirements for type CHECKBOX."
The problem is we don't know which sheet this is occurring in which is making it hard to understand what the root cause of the problem is. Is there a way to identify the location of a column without a Sheet ID? Note we have six-thousand Sheets and it's not practical to do this manually.
The path of least resistance for you might be to contact Smartsheet support to explain your scenario and ask for their help in identifying the sheet.
If Smartsheet support is unable to assist, then you could write a script that'd programmatically iterate through all of the sheets that the specified account has access to doing the following for each sheet:
Issue a Get Column request the current sheet.
If the request succeeds, you've found the sheet that contains the specified column --> capture/output sheet ID and sheet name and exit the loop (end processing).
If the request fails (i.e., returns a 404 error code to indicate column not found), move on to the next sheet.
Note that if you're program needs to issue hundreds or thousands of Get Column requests before it finds the sheet and ends processing -- you'll need to insert pauses between batches of requests so that you don't get a rate limiting error (error code 429). The Smartsheet API docs contain info about rate limiting.
If you need help with the script, update your question with a language tag to indicate what language you're going to be using, and add a comment here on my answer. Depending on the language you're using, I may be able to provide more help regarding the specifics of the script.
For PowerApps, what data source, other than SharePoint lists are accessible via Powershell?
There are actually two issues that I am dealing with. The first is dynamic updating and the second is the 500 item limit that SharePoint lists are subject to.
I need to dynamically update my data source, which I am currently doing with PowerShell. My data source is not static and updating records by hand is time-consuming and error prone. The driving force behind my question is that the SharePoint list view threshold is 5,000 records however you are limited to 500 visible and searchable records when using SharePoint lists in the Gallery View and my data source contains greater than 500 but less than 1000 records. If you have any items beyond the 500th record that should match the filter criteria, they will not be found. So SharePoint lists are not optional for me until that limitation is remediated
Reference: https://powerapps.microsoft.com/en-us/tutorials/function-filter-lookup/
To your first question, Powershell can be used for almost anything on the Microsoft stack. You could use SQL server, Dynamics 365, SP, Azure, and in the future there will be an SDK for the Common Data Service. There are a lot of connectors, and Powershell can work with a good majority of them.
Take note that working with these data structures through Powershell is independent from Powerapps. Powerapps just takes the data that the data connector gives it, and if you have something updating the data in the background (Powershell, cron job, etc.), In order to get a dynamic list of items, you can use a Timer control and a Refresh function on your data source to update the list every ~5-20 seconds.
To your second question about SharePoint, there is an article that came out around the time you asked this regarding working with large lists. I wouldn't say it completely solves your question, but this article seems to state using the "Filter" function on basic column types would possibly work for you:
...if you’d like to filter the set of items that you are showing in the gallery control, you will make use of a “Filter” expression, rather than the “Search” expression, which is the default that existing apps used. With our changes, SharePoint connector now supports “equals” type of queries on columns that support filtering (Single line of text, choice, numbers, dates and people), so make sure that the columns and the expressions you use are supported and watch for the same warning to avoid reverting back to the top 500 items.
It also notes that if you want to pull from a list larger than the 5k threshold, you would need to use indexes, I have not fully tested this yet but it seems that this could potentially solve your problem.
I've looked all over and cannot find an answer to my question; I can't even determine whether it is possible.
Referring to the attached image, you will notice that this is a statement report with data grouping activated.
1) The report shows all the services invoiced to an account by date.
You can expand the group to see all the transactions that formed part of that service for that day. (You can for instance make use of the same service multiple times per day)
2) This is the detailed layout of the service invoiced. This list is different for each service, but mainly it will show you a summarized transaction list (PK BatchId), which has the "+" symbol next to it to enable drilldown to a detailed report of the batch.
My problem:
When loading the statement report, we are now hitting multiple tables, multiple times to produce the data to be grouped and displayed in #2 (refer to image).
We are trying to avoid this like the plague.
My Question
Is there a way to populate #2 when and only when the user clicks a "+" symbol or an "expand" image where the "+" is currently located in #1.
In other words. We dispose of the group function and populate the statement without detailed information. When the user clicks on #1, we load a sproc, populate a dataset and display the data in #2.
Any thoughts on this?
Drillthrough Reports look like a good solution here. See the link for more information on how these work. So basically you have the report without the detailed information, but when somebody clicks on 1 it opens up a new report with the details behind it.
After testing, I confirmed that subreports are executed even if they are hidden within an element that can be toggled.
So subreports won't answer this problem.
[Edited: previously I thought they could be used. JAT points out that this negative answer may have some value, so I'm leaving it.]
I apologize if this has been already asked but my searches have had little luck. I've also tried MSDN forum's, but its obvious that I need the big guns for this one ;)
I am using VS2008 (SSRS 2008 R2) to create a series of subreports. Each Subreport queries 1 or more Web Methods from a WCF Web Service.
When I run an rdl as a stand-alone report, everything renders properly. When I run that rdl as a subreport, I receive an error recommending that I check the log (details, and steps to reproduce below.)
Simple Test (No Subreports):
Using the instructions found in the article Reporting Services: Using XML and Web Service Data Sources I was able to create the necessary Shared Datasets for each web method.
I successfully created a report (SubTest.rdl) utilizing a Shared Dataset for a Table.
The dataset's underlying web method contains no parameters (trying to keep it simple).
SubTest.rdl renders correctly!
So far so good.
Test 2: Master/Subreport structure
created a Parent/Master report (MasterTest.rdl)
added a Subreport Report Item, and specified "SubTest.rdl"
Note: No Report parameters are specified, as SubTest does not have any parameters defined.
I receive the following error during the rendering of the MasterTest.rdl report:
Warning 1 [rsErrorExecutingSubreport] An error occurred while executing the subreport 'Subreport1' (Instance: 5iS0): Data retrieval failed for the subreport, 'Subreport1', located at: /SubTest. Please check the log files for more information.
Additional Testing:
To ensure that my subreport is properly defined in MasterTest.rdl, I altered SubTest.rdl. In SubTest I removed the DataSource, DataSet, and Table from "SubTest.rdl" and insterted a TextBox filled with the words "Output From Subreport". This rendered properly in the Master report, indicating that the problem specifically relates to my Web Service Datasource/DataSet.
Questions: :(
Is there a way to accomplish this task?
If this is not possible, can anyone suggest a workaround for providing Web Service xml to a subreport?
Also, per the error message: Any idea where I can find this log? (because this is running in Visual Studio, checking the SSRS logs folder on my local machine did not help, nor did running VS with logging enabled.)
A workaround that I could not get to work:
I tried to follow the instructions in the linked article for passing XML to a subreport as a parameter, but
The master passes the xml as a scalar string. Because I am querying
a web service and not using a data set where each row contains a col holding the XML, I only have the resultant dataset to work with. Basically I need to convert a data set to a scalar.
I had difficulty following the instructions (even if I could solve problem
1, I'm not even sure that I properly defined the dataset and
parameter - how do I get fields when the data is not known until
runtime?)
Thank you for any help you can give. This has been driving nuts for days!