I apologize if this has been already asked but my searches have had little luck. I've also tried MSDN forum's, but its obvious that I need the big guns for this one ;)
I am using VS2008 (SSRS 2008 R2) to create a series of subreports. Each Subreport queries 1 or more Web Methods from a WCF Web Service.
When I run an rdl as a stand-alone report, everything renders properly. When I run that rdl as a subreport, I receive an error recommending that I check the log (details, and steps to reproduce below.)
Simple Test (No Subreports):
Using the instructions found in the article Reporting Services: Using XML and Web Service Data Sources I was able to create the necessary Shared Datasets for each web method.
I successfully created a report (SubTest.rdl) utilizing a Shared Dataset for a Table.
The dataset's underlying web method contains no parameters (trying to keep it simple).
SubTest.rdl renders correctly!
So far so good.
Test 2: Master/Subreport structure
created a Parent/Master report (MasterTest.rdl)
added a Subreport Report Item, and specified "SubTest.rdl"
Note: No Report parameters are specified, as SubTest does not have any parameters defined.
I receive the following error during the rendering of the MasterTest.rdl report:
Warning 1 [rsErrorExecutingSubreport] An error occurred while executing the subreport 'Subreport1' (Instance: 5iS0): Data retrieval failed for the subreport, 'Subreport1', located at: /SubTest. Please check the log files for more information.
Additional Testing:
To ensure that my subreport is properly defined in MasterTest.rdl, I altered SubTest.rdl. In SubTest I removed the DataSource, DataSet, and Table from "SubTest.rdl" and insterted a TextBox filled with the words "Output From Subreport". This rendered properly in the Master report, indicating that the problem specifically relates to my Web Service Datasource/DataSet.
Questions: :(
Is there a way to accomplish this task?
If this is not possible, can anyone suggest a workaround for providing Web Service xml to a subreport?
Also, per the error message: Any idea where I can find this log? (because this is running in Visual Studio, checking the SSRS logs folder on my local machine did not help, nor did running VS with logging enabled.)
A workaround that I could not get to work:
I tried to follow the instructions in the linked article for passing XML to a subreport as a parameter, but
The master passes the xml as a scalar string. Because I am querying
a web service and not using a data set where each row contains a col holding the XML, I only have the resultant dataset to work with. Basically I need to convert a data set to a scalar.
I had difficulty following the instructions (even if I could solve problem
1, I'm not even sure that I properly defined the dataset and
parameter - how do I get fields when the data is not known until
runtime?)
Thank you for any help you can give. This has been driving nuts for days!
Related
I have crystal report that was working before database upgrade. It is only one report that doesnt work. So I would not think of a driver issue.
I am able to test this report using CRs client tools, design and then preview. The preview does not bring any data. A single parameter is used and I am sure there is data because the data is retrieved if I create a new crystal report and also verified the SQL. (So there is no question about the no data or any missing links -- its a simple view).
This cannot be a driver issue as well, as all other old reports still work.
Have also tried deleting all the field's from the report, then add a single/simple new table and preview, still no data is showing.
Are there any logs inside crystal to investigate ? have tried ODBC.logs doesnt help as doesn't say what happens inside crystal reports after retrieving the data from database.
Thanks.
Zain
I've had this problem multiple times where my report comes up with empty fields. This may not be your cause, but what fixes it for me is to make sure that the dataset/table matches is referred to by the same name everyplace. In the xxxxxxDataset.xsd file, that table that's pictured should be the same name that's used in the function GetData() As System.Data.DataSet in your .NET object that uses the stored procedure to get the data. (You may call your function something other than GetData().) So try changing the ds.Tables(0).Tablename = "xxxxxxxTable" to match what the table in the xsd file is called.
I have a requirement to generate reports in PDF and Excel format. For the same I have chosen Jasper. Now require some help from your side to identify the best approach on the same.
Note - My queries are dynamic in nature.Like in some scenario then will provide name in some scenario they will provide dates not name and in some scenario both.
Approaches I have identified are given below.
We can create data source and query in JRXML and execute the same.But not sure query will be dynamic or not. I am personally not prefer this approach because from java I can pass the connection from pool.
We can pass the query and connection both from the Java side and then Japser will execute the query.
We can query in java and then pass the List of bean to the Jasper for report creation.
Now need some suggestions on the best approach among above and also of any approach suggested apart from the above.
To me, option 3 is best. I did that previously.
For mine, I had a master report containing conditional sub-reports. To do that, I have build sub-report's .jasper from their .jrxml and passed my List of bean so that I don't have to re/compile the .jasper from .jrxml again(My master report was in .jrxml and condition for sub-reports where set there).
Another advantage is, you don't have to change your jasper files if you want to change your logic in query level-just leave them untouched once done.
So, I think , option 3 is good to go.
Your help is needed.
I am Using .Net 4.5 and CR13. I've created two reports using OLEDB(SQL Server 2012), with SQL command as source. I wanted to add second report as a sub-report to the first one. For the testing purpose, I just inserted second report to first as sub-report with no link. While in the design time everything works perfect(both reports shows all data according to the command), but in the run-time sub-report shows no records for the same command.
NOTE: I am not using any parameters for the testing purpose (Will be using later on if everything is a good to go)
Thank You
Jason
Is it at all possible using CRM 2011 and SSRS to generate a report on a single record, and only get results for that one record?
EDIT
Additional Info - Must Use:
Custom SSRS report
Custom entity in CRM
Here's a more specific link to your question: link. You're probably looking for pre-filtering (look for "3. Pre-filtering Element" in the link provided) if you want the report to be record specific (context sensitive).
Here's a link describing the 2 types of pre-filters (CRM 4.0 but the theory applies to CRM 2011): link. And here's an example of prefiltering in CRM 2011: link
I have done this successfully in CRM 2011 with a completely custom report made in BIDS, on a custom entity, with full context sensitivity.
Make sure to learn fetchXML as it's going to be the going forward technology for these reports. The existing reports are using SQL which make them bad examples to copy off of.
Here's an example on how to extract fetchXML from an advanced find: link It also has more information on pre-filtering.
Take a look a the report Account Overview.rdl. It could be executed for a single account record or multiple records.
See Reporting for Microsoft Dynamics CRM Using Microsoft SQL Server Reporting Services
Create an embedded connection to the CRM database engine for the environment you want to target.
Create an embedded dataset to query the current record. This going to be kind of weird since experience will tell you that you are going to get tons of records, but because of the clunkiness behind CRM it will actually only get the current record. For example, if you wanted to get the current quote you would use "SELECT quoteid FROM FilteredQuote AS CRMAF_Quote"
Add a parameter to store the reference to the entity you just queried. In keeping with this example I created #QuoteFilter which is type text, could store multiple values (even though that's not what we're using it for), and gets its default value from the dataset in step 2. Also, probably ought to make this hidden since GUIDs aren't end user friendly.
Finally, use the parameter discovered in the where clause of the other datasets. For example, a search on quote products for the current quote would look something like SELECT * FROM FilteredQuoteDetail WHERE (quoteid = #QuoteFilter)
As a final note, you should keep in mind that CRM loves to remember everything even when you don't want it, too. On one of my reports I messed up my datasource and CRM was forever convinced that the report should run against all records. I fixed my datasource, but uploading the report did not trigger a refresh and correct the problem. In the end, I deleted the report from CRM, created a new one, uploaded the same exact file with no changes, and everything worked. Go figure.
I'm fairly new to using the Birt Report Designer and need to figure out how to generate a report from a SQLite database. I have suceeded in getting it to connect to the DB but am now unsure how to generate a report and the tutorials that I have found aren't of much help so far.
I have a template that was given to me by my employer that has a few fields, I'm wondering if these fieldnames (in the template) are supposed to match field names in the DB.
Also, when I go to Run->View Report-> As PDF I am unsure what I am supposed to enter for the field "User Key", does this correspond to a table name in the DB or something along these lines?
As of now, I have tried entering a table name but just a blank report is generated.
If anyone can point me to a good resource or help with this I would greatly appreciate it. Thanks
There are two books i could really advice:
BIRT - A Field Guide to Reporting
Integrating and Extending BIRT
and the Eclipse Help containing BIRT documentation.
I suppose the User Key could be report parameter (listed in Data Explorer window), which is passed to Data Set to select appropriate data. If I'm guessing right, check within a Data Set editor ("Parameters" tab and "Query" tab) where the User Key parameter goes in - probably to one of the table field in a WHERE clause. Parameters in a query are represented by question marks: SELECT * FROM fooTable WHERE barColumn = ?. Hope tracking this would lead to find out, what to enter to the parameter.
Additionally, ensure if your Data Set(s) is(are) connected correctly to your SQLite Data Source ("Data Source" tab in a Data Set editor).
Being as new as you are to BIRT, I would suggest building a couple of reports with the sample DB (Classic Models). There are many, many samples out there for you to use as a guide. Additionally, most tutorials will use the Classic Models data so you can follow right along. After you create a couple of practice reports (this should not take more than 30-45 minutes) the template you have been given will likely make A LOT more sense and allow you to make progress almost immediately.
If you are looking for a nice collection of tutorials and samples, be sure to check out Birt Exchange for Dev Share (samples) & tutorials.
As for the "User Key" this is almost certainly a report-level parameter used to filter the data set (as the previous answer points out).
Good Luck!