In order to install Apache age from source,
i am installing development files for PostgreSQL server-side programming. For this i am using following command on my Ubuntu OS.
sudo apt install postgresql-server-dev-11
But i am getting this error "Unable to locate package postgresql-server-dev-11"
image of the error
i am searching online but did not find yet.It would be great if someone help.
This is because you do not have the correct Ubuntu version and the package does not exist.
To determine the major PostgreSQL version in a given release of Ubuntu find it here in Ubuntu Packages
18.04 has PostgreSQL 10 (postgresql-server-dev-10)
19.04 has PostgreSQL 11 (postgresql-server-dev-11)
20.04 has PostgreSQL 12 (postgresql-server-dev-12)
If you have ubuntu 19.04 you can follow this guide
In the case there is no maintainer for the Version of PostgreSQL you are trying to install you have to build from source.
Download your PostgreSQL version source code. Then run these commands.
tar xf postgresql-version.tar.bz2
cd postgresql-version
Install dependencies. Then run the following.
./configure
make
su
make install
adduser postgres
mkdir -p /usr/local/pgsql/data
chown postgres /usr/local/pgsql/data
su - postgres
/usr/local/pgsql/bin/initdb -D /usr/local/pgsql/data
/usr/local/pgsql/bin/pg_ctl -D /usr/local/pgsql/data -l logfile start
/usr/local/pgsql/bin/createdb test
/usr/local/pgsql/bin/psql test
Reference from Official Docs
Seems the package is not available from your package manager. But, since you want development files, it's best to get the source code directly from GitHub.
In your home directory do:
git clone https://github.com/postgres/postgres.git
cd postgres
git checkout "REL_11_STABLE"
then follow this guide https://www.thegeekstuff.com/2009/04/linux-postgresql-install-and-configure-from-source/
Official documentation for installing from source is here https://www.postgresql.org/docs/current/installation.html
You should follow these steps:
sudo apt-get update
sudo apt-get -y install postgresql-12 postgresql-client-12
sudo systemctl status postgresql
I was also facing the same problem and i just updated my Ubunutu and the error got resolved when i run the command again
I faced the same issue on Ubuntu jammy(22.04 LTS).
If you are on the same version of Ubuntu as me, try using
sudo apt install postgresql-server-dev-all
Because neither
sudo apt install postgresql-server-dev-12
nor
sudo apt install postgresql-server-dev-11
worked for me.
I use command:
cpanm --sudo --interactive Filter::Crypto
I am always asked for location of openssl.
Then I run command:
dpkg -L openssl
I get many paths.
I dont know what should I do next.
thanks
To install this module, the develop files of openssl are needed. Under Ubuntu, it needs to install package: libssl-dev to get develop files to be installed: so after running sudo apt-get install libssl-dev, the problem is resolved.
In CentOS, install openssl-devel package.
I cannot load VSCOde onto my old Toshiba laptop using Fedoa23. I follow the instructions from the web and finally get the message "No package code availale". I have previously installes VSCode on an old computer using Fedora23 but this time it does not work? Where do I go wrong?
Thanks.
Don't know, but this works for me.
You can use these step to install VSCode:
sudo rpm --import https://packages.microsoft.com/keys/microsoft.asc
sudo sh -c 'echo -e "[code]\nname=Visual Studio Code\nbaseurl=https://packages.microsoft.com/yumrepos/vscode\nenabled=1\ngpgcheck=1\ngpgkey=https://packages.microsoft.com/keys/microsoft.asc" > /etc/yum.repos.d/vscode.repo'
Then update the package cache and install the package using dnf (Fedora 22 and above):
dnf check-update
sudo dnf install code
Or on older versions using yum:
yum check-update
sudo yum install code
I have successfully launched new AWS RDS PostgreSQL v10 instance and need to install PostgreSQL v10 client on Amazon Linux EC2 instance.
I have tried to install it with yum, but it cant find the package for v10:
[ec2-user#ip-X-X-X-X ~]$ sudo yum install -y postgresql10
Loaded plugins: priorities, update-motd, upgrade-helper
amzn-main | 2.1 kB 00:00:00
amzn-updates | 2.5 kB 00:00:00
No package postgresql110 available.
Error: Nothing to do
Previously I managed to install PostgreSQL client v9.5 with:
[ec2-user#ip-X-X-X-X ~]$ sudo yum install -y postgresql95
I guess I need to add Postgres yum repository, as mentioned in https://www.postgresql.org/download/linux/redhat/. But what Platform should I choose for Amazon Linux? Red Hat?
You can try to run the following command on your Linux server:
sudo amazon-linux-extras install postgresql10
Packages/Repos which is designed to work of RedHat will work on Amazon Linux also, Amazon Linux is a minimal-install version of RHEL. You may run into compatibility issues if you select old version of Amazon Linux (Amazon linux 1) for the below steps, otherwise it should work fine in the latest version Amazon Linux 2.
Check Amazon Linux version
[ec2-user ~]$ cat /etc/system-release
Amazon Linux release 2.0 (2017.12) LTS Release Candidate
Install RHEL 7 yum repo for PostgreSQL
[ec2-user ~]$ sudo yum install -y https://download.postgresql.org/pub/repos/yum/10/redhat/rhel-7-x86_64/pgdg-redhat10-10-2.noarch.rpm
[ec2-user ~]$ sudo sed -i "s/rhel-\$releasever-\$basearch/rhel-latest-x86_64/g" "/etc/yum.repos.d/pgdg-10-redhat.repo"
Install PostgreSQL Client v10
[ec2-user ~]$ sudo yum install -y postgresql10
[ec2-user ~]$ psql --version
psql (PostgreSQL) 10.3
Read more about Amazon Linux 2
Note! Amazon Linux 2 provides additional package installation through Amazon Linux Extras Repository (amazon-linux-extras) ((client only)). Since postgresql10 is not yet available, adding extra yum repo is the only solution per today.
UDATE 2019May
those who see
Error: Package: pgdg-redhat-repo-42.0-4.noarch
(/pgdg-redhat-repo-latest.noarch)
Requires: /etc/redhat-release
may still install step by step all dependencies and the server with:
yum install -y https://download.postgresql.org/pub/repos/yum/10/redhat/rhel-latest-x86_64/postgresql10-libs-10.7-2PGDG.rhel7.x86_64.rpm
yum install -y https://download.postgresql.org/pub/repos/yum/10/redhat/rhel-latest-x86_64/postgresql10-10.7-2PGDG.rhel7.x86_64.rpm
yum install -y https://download.postgresql.org/pub/repos/yum/10/redhat/rhel-latest-x86_64/postgresql10-server-10.7-2PGDG.rhel7.x86_64.rpm
Since none of the previous answers worked for me, I'm adding a solution that let me install the postgresql10 client. We're using VERSION="2018.03" of Amazon Linux AMI in our pipelines.
Building from source:
Note: The link below points to postgresql 10.4, you may want to check for newer subversions
sudo yum install -y gcc readline-devel zlib-devel
wget https://ftp.postgresql.org/pub/source/v10.4/postgresql-10.4.tar.gz
tar -xf postgresql-10.4.tar.gz
cd postgresql-10.4
./configure
make -C src/bin
sudo make -C src/bin install
make -C src/include
sudo make -C src/include install
make -C src/interfaces
sudo make -C src/interfaces install
make -C doc
sudo make -C doc install
The new package should be installed with all its executables in here: /usr/local/pgsql/bin
Now, keep in mind that commands psql, pg_dump etc. still point to the old version of the psql client. You can run with the full executable paths (/usr/local/pgsql/bin/psql) or prepend the new directory at the beginning of your $PATH so that the system will look it up first:
Edit ~/.bash_profile adding this at the end:
export PATH="/usr/local/pgsql/bin:$PATH"
Then run:
source ~/.bash_profile
Now everything should be ready:
[ec2-user#ip-xx-x-x-xxx ~]$ psql --version
psql (PostgreSQL) 10.4
Adapting Haneef Mohammed's answer for Amazon Linux 1 (tested on 2018.03):
Go to the Postgres repositories page and grab the URL for 'Red Hat Enterprise Linux 6 - x86_64'. Install the PG repos and amend the entries, replacing '$releasever' with '6.9' (or newer?):
[ec2-user ~]$ sudo yum install -y https://download.postgresql.org/pub/repos/yum/10/redhat/rhel-6-x86_64/pgdg-redhat10-10-2.noarch.rpm
[ec2-user ~]$ sudo sed -i "s/rhel-\$releasever-\$basearch/rhel-6.9-x86_64/g" "/etc/yum.repos.d/pgdg-10-redhat.repo"
Second part is the same:
[ec2-user ~]$ sudo yum install -y postgresql10
[ec2-user ~]$ psql --version
psql (PostgreSQL) 10.3
PGDG repo is no longer available for Amazon Linux. So you can use amazon repo.
amazon-linux-extras install postgresql10 vim epel -y
Or follow this article
https://installvirtual.com/install-postgresql-10-on-amazon-ec2/
As of May 25th, 2019, the following direct RPM installation worked for me on Amazon Linux 1 2018.03 (latest Beanstalk platform version) to install PostgreSQL Client 10.7:
sudo rpm -ivh --force https://yum.postgresql.org/testing/10/redhat/rhel-6-x86_64/postgresql10-libs-10.7-2PGDG.rhel6.x86_64.rpm
sudo rpm -ivh --force https://yum.postgresql.org/testing/10/redhat/rhel-6-x86_64/postgresql10-10.7-2PGDG.rhel6.x86_64.rpm
PSql10.7 installation (08/20/2019)
Remove all of the older version Psql client and perform the below steps:
wget https://yum.postgresql.org/10/redhat/rhel-6.9-x86_64/postgresql10-libs-10.7-1PGDG.rhel6.x86_64.rpm
wget https://yum.postgresql.org/10/redhat/rhel-6.9-x86_64/postgresql10-10.7-1PGDG.rhel6.x86_64.rpm
sudo rpm -ivh postgresql10-libs-10.7-1PGDG.rhel6.x86_64.rpm
sudo rpm -ivh postgresql10-10.7-1PGDG.rhel6.x86_64.rpm
This my 2019 solution:
Just do
sudo amazon-linux-extras install postgresql9.6
You should not have to download it from any outside source, since it is already given to you by default from Amazon, all you have to do is install it.
The other solutions didnt work for me and I spent a good amount time banging my head against the wall trying to figure out why.
And surprisingly even though you install psql9.6 you get version 10.
The following works for psql v11 on Amazon Linux (v1)
wget https://yum.postgresql.org/11/redhat/rhel-6.9-x86_64/postgresql11-libs-11.8-1PGDG.rhel6.x86_64.rpm
wget https://yum.postgresql.org/11/redhat/rhel-6.9-x86_64/postgresql11-11.8-1PGDG.rhel6.x86_64.rpm
sudo yum clean all
sudo rpm -ivh postgresql11-libs-11.8-1PGDG.rhel6.x86_64.rpm
sudo rpm -ivh postgresql11-11.8-1PGDG.rhel6.x86_64.rpm
The way I resolved the issue was by running
yum clean all
before
yum install -y postgresql10
on Amazon Linux
for v11 on Amazon Linux 2 I had to do
yum -y install https://download.postgresql.org/pub/repos/yum/11/redhat/rhel-7-x86_64/pgdg-centos11-11-2.noarch.rpm
sed -i "s/rhel-\$releasever-\$basearch/rhel-7-x86_64/g" "/etc/yum.repos.d/pgdg-11-centos.repo"
I have researched and viewed the post to install luamongo- http://groups.google.com/group/luamongo/browse_thread/thread/1eaa56974614dc90/c91c842e241aa4de#c91c842e241aa4de
But the installation will not work. I already have mongodb-10gen version 2.0.3 and lua5.1 version 5.1.4.10 installed.
How do I download luamongo from https://github.com/moai/luamongo and install it and get it working as an import statement in a lua script to be able to write to a mongo db? Any suggestions would be helpful, nothing I have tried so far or read has been able to help. If more information is needed I will post it. Thanks in advance.
I got this script from a friend of mine which should be helpful:
# Download mongodb and driver
wget http://downloads.mongodb.org/cxx-driver/mongodb-linux-x86_64-v2.0-latest.tgz
wget http://fastdl.mongodb.org/linux/mongodb-linux-x86_64-2.0.2.tgz
# Extract each
tar xvzf mongodb-linux-x86_64-2.0.2.tgz
tar xvzf mongodb-linux-x86_64-v2.0-latest.tgz
# Add mongo bin to PATH
export PATH=$PATH:~/mongodb-linux-x86_64-2.0.2/bin
# Grab dev tools and dependencies (May need to run apt-get update to download all)
sudo apt-get -y install tcsh scons libpcre++-dev libboost-dev libreadline-dev libboost-program-options-dev libboost-thread-dev libboost-filesystem-dev libboost-date-time-dev gcc g++ git lua5.1-dev make
# Grab latest luamongo (will need to add your github ssh key)
git clone git#github.com:moai/luamongo
# Compile mongo driver
cd mongo-cxx-driver-v2.0
sudo scons install
# Install where lua can load it
sudo cp libmongoclient.* /usr/lib