I'm a beginner in programming in general..
What I'm trying to do is to create a powershell script that will:
Get information on each user on an Active Directory group.
Inside each group there may be another group, so I would want it to get the list of users from each nested group as well.
Only give me the information for each group once.
This is what I have so far:
$list = Get-ADGroupMember Admins
foreach($u in $list) {
Get-ADObject $u
}
foreach ($_ in $u) {
if ($u.ObjectClass -eq 'user') {
Get-ADUser $u -Properties * | select givenname, surname, samaccountname | ft -autosize
} else {
Get-ADGroupMember $u -Recursive | select name, samaccountname | ft -autosize
}
}
So far I'm trying to get it to work with that one group 'Admins' and then if it does I would want to run the code for more groups at the same time.
Any help or guidance would be appreciated.
You seem to want only properties that are returned by default by Get-ADUser aswell as Get-ADGroup, so in both cases, there is no need to specify the -Properties parameter.
Get-ADGroupMember can return user, computer and group objects, so at the moment, your else condition expects groups, where you could end up with a computer object..
In your code, you output to console with ft -autosize both in the if and the else, but it would be simpler to capture both types of resulting objects in a variable at the start of the loop and output it as a whole afterwards:
# you can load a list of group names from a predefined array:
$Groups = 'Admins', 'Users'
# or load from a file, each group name listed on a separate line:
# $Groups = Get-Content -Path 'D:\Test\ADGroups.txt'
# or get all AD groups in the domain:
# $Groups = (Get-ADGroup -Filter *).Name
$result = foreach ($group in $Groups) {
Get-ADGroup -Filter "Name -eq '$group'" | ForEach-Object {
# we could use the $group variable, but this ensures correct casing
$groupName = $_.Name
$members = $_ | Get-ADGroupMember -Recursive
foreach ($member in $members) {
if ($member.objectClass -eq 'user') {
Get-ADUser -Identity $member.DistinguishedName |
Select-Object #{Name="GroupName"; Expression={$groupName}},
#{Name="MemberType";Expression={'User'}},
Name,
GivenName,
Surname,
SamAccountName
}
elseif ($member.objectClass -eq 'group') {
Get-ADGroup -Identity $member.DistinguishedName |
Select-Object #{Name="GroupName";Expression={$groupName}},
#{Name="MemberType";Expression={'Group'}},
Name,
#{Name="GivenName";Expression={''}}, # groups don't have this property
#{Name="Surname";Expression={''}}, # groups don't have this property
SamAccountName
}
}
}
}
# output is console
$result | Format-Table -AutoSize
# write to CSV file
$result | Export-Csv -Path 'D:\Test\GroupsInfo.csv' -NoTypeInformation
The trick is here to output objects with equal properties for both a user and a group object
So Here is my code. Essentially this code will be used by a domain admin to run on our terminal server. I lists all of the currently logged in users, and check their individual group membership and then counts members. Easy Peasy.
99% of this works as expected but I am not a code guru by far. I'm having problems getting a proper list of names from Line 4 which uses quser. If I switch to using Line 5 as text the code works as expected.
I can't for the life of me get the output from line 4 into a format I can use in the rest of the code.
Import-Module ActiveDirectory
$calgary = 0
$edmonton = 0
$users = (quser) -replace '\s{2,}', ',' | ConvertFrom-Csv | Select-Object USERNAME
$usersold = "Thomas", "Scott", "jeremy"
$groups = 'Domain Admins'
foreach ($user in $users) {
foreach ($group in $groups) {
$members = Get-ADGroupMember -Identity $group -Recursive | Select -ExpandProperty SamAccountName
If ($members -contains $user) {
$calgary = $calgary + 1
Write-Host "$user is a member of $group"
Write-Host "$group has $calgary logged in users"
} Else {
Write-Host "$user is not a member of $group"
}
}
}
$users.GetType() returns an Array of elements of type PSCustomObject, so this is an object with properties, rather than just a list of strings.
When you do ($user in $users) then each $user is an object with the USERNAME property. So you have two options:
Access the USERNAME in the loop
When you need the username inside the loop, use $user.USERNAME
Get a list of strings rather than objects
Replace line 4 with:
$users = $((quser) -replace '\s{2,}', ',' | ConvertFrom-Csv | Select-Object USERNAME).USERNAME
On line 4, try using:
$users = ((quser) -replace '\s{2,}', ',' | ConvertFrom-Csv | Select-Object USERNAME).username
I think a better way to get a list of logged on users is to use Get-CimInstance to gather the sessions, filter for LogonType 3 (remote logon), and then get the users associated with those logon IDs. Then, since it looks like you want to be able to check multiple groups, I would get the members for each group, and just note if each user is a member of each group. At the end I would output a table of all sessions, including which groups each user is a member of, and how many users each group has logged on.
$LoggedOn = gcim Win32_LoggedOnUser
$GroupNames = 'pkiadmins'
$Groups = #{}
$GroupNames | ForEach-Object { $Groups.Add($_,(Get-ADGroupMember -Identity $_ -Recursive | Select -Expand SamAccountName)) }
$Sessions = gcim Win32_LogonSession -PipelineVariable Session|?{$_.LogonType -eq 3}|%{
$SesUser = $LoggedOn|?{$_.Dependent.LogonId -eq $Session.LogonId}
$SessionOut = [PSCustomObject]#{
Domain = $SesUser.Antecedent.Domain
User = $SesUser.Antecedent.Name
}
ForEach($Group in $GroupNames){
Add-Member -InputObject $SessionOut -NotePropertyName $Group -NotePropertyValue ($SessionOut.User -in $Groups[$Group])
}
If($SessionOut.User -notmatch '\$$'){$SessionOut} #skip computer accounts
}
$Sessions|FT -Auto
ForEach($Group in $GroupNames){
"Group '{0}' has {1} logged in user(s)" -f $Group,([array]($Sessions|?{$_.$Group})).Count
}
PowerShell's Get-ADGroupMember cmdlet returns members of a specific group. Is there a cmdlet or property to get all the groups that a particular user is a member of?
I fixed my mistake: Get-Member should be Get-ADGroupMember.
Get-ADPrincipalGroupMembership will do this.
Get-ADPrincipalGroupMembership username | select name
name
----
Domain Users
Domain Computers
Workstation Admins
Company Users
Company Developers
AutomatedProcessingTeam
Single line, no modules necessary, uses current logged user:
(New-Object System.DirectoryServices.DirectorySearcher("(&(objectCategory=User)(samAccountName=$($env:username)))")).FindOne().GetDirectoryEntry().memberOf
Kudos to this vbs/powershell article: http://technet.microsoft.com/en-us/library/ff730963.aspx
A more concise alternative to the one posted by Canoas, to get group membership for the currently-logged-on user.
I came across this method in this blog post: http://www.travisrunyard.com/2013/03/26/auto-create-outlook-mapi-user-profiles/
([ADSISEARCHER]"samaccountname=$($env:USERNAME)").Findone().Properties.memberof
An even better version which uses a regex to strip the LDAP guff and leaves the group names only:
([ADSISEARCHER]"samaccountname=$($env:USERNAME)").Findone().Properties.memberof -replace '^CN=([^,]+).+$','$1'
More details about using the [ADSISEARCHER] type accelerator can be found on the scripting guy blog: http://blogs.technet.com/b/heyscriptingguy/archive/2010/08/24/use-the-powershell-adsisearcher-type-accelerator-to-search-active-directory.aspx
Old school way from CMD:
net user mst999 /domain
(GET-ADUSER –Identity USERNAME –Properties MemberOf | Select-Object MemberOf).MemberOf
This should provide you the details for current user. Powershell not needed.
whoami /groups
If you cannot get Get-ADPrincipalGroupMembership to work for you could try logging in as that user then use.
$id = [Security.Principal.WindowsIdentity]::GetCurrent()
$groups = $id.Groups | foreach-object {$_.Translate([Security.Principal.NTAccount])}
$groups | select *
While there are many excellent answers here, there is one which I was personally looking for that was missing. Once I figured it out - I thought I should post it in case I want to find it later, or it actually manages to help someone else at some point:
Get-ADPrincipalGroupMembership username | Format-Table -auto
A second approach for presenting this is to specify the individual columns you are interested in eg:
Get-ADPrincipalGroupMembership username | select name, GroupScope, GroupCategory
This gives all the AD groups the username belongs to - but also presents all of the default properties of each group formatted nicely as a table.
The key benefit this gives you is you can see at a glance which are distribution lists, & which are Security groups. You can further see at a glance which are Universal, which are DomainLocal & which are Global.
Why would you care about this last bit?
Universal group is a security or distribution group that contains
users, groups, and computers from any domain in its forest as
members. You can give universal security groups rights and
permissions on resources in any domain in the forest.
Global group is a group that can be used in its own domain, in member
servers and in workstations of the domain, and in trusting domains.
In all those locations, you can give a global group rights and
permissions and the global group can become a member of local groups.
However, a global group can contain user accounts that are only from
its own domain.
Domain local group is a security or distribution group that can
contain universal groups, global groups, other domain local groups
from its own domain, and accounts from any domain in the forest. You
can give domain local security groups rights and permissions on
resources that reside only in the same domain where the domain local
group is located.
Get-Member is not for getting user's group membership. If you want to get a list of groups a user belongs to on the local system, you can do so by:
$query = "ASSOCIATORS OF {Win32_Account.Name='DemoUser1',Domain='DomainName'} WHERE ResultRole=GroupComponent ResultClass=Win32_Account"
Get-WMIObject -Query $query | Select Name
In the above query, replace DemoUser1 with the username you want and the DomainName with either your local computer name or domain name.
Get group membership for a user:
$strUserName = "Primoz"
$strUser = get-qaduser -SamAccountName $strUserName
$strUser.memberof
See Get Group Membership for a User
But also see Quest's Free PowerShell Commands for Active Directory.
[Edit: Get-ADPrincipalGroupMembership command is included in Powershell since v2 with Windows 2008 R2. See kstrauss' answer below.]
Get-Member is a cmdlet for listing the members of a .NET object. This has nothing to do with user/group membership. You can get the current user's group membership like so:
PS> [System.Security.Principal.WindowsIdentity]::GetCurrent().Groups |
Format-Table -auto
BinaryLength AccountDomainSid Value
------------ ---------------- -----
28 S-1-5-21-... S-1-5-21-2229937839-1383249143-3977914998-513
12 S-1-1-0
28 S-1-5-21-... S-1-5-21-2229937839-1383249143-3977914998-1010
28 S-1-5-21-... S-1-5-21-2229937839-1383249143-3977914998-1003
16 S-1-5-32-545
...
If you need access to arbitrary users' group info then #tiagoinu suggestion of using the Quest AD cmdlets is a better way to go.
I wrote a PowerShell function called Get-ADPrincipalGroupMembershipRecursive. It accepts the DSN of a user, computer, group, or service account. It retrieves an initial list of groups from the account's memberOf attribute, then recursively checks those group's memberships. Abbreviated code is below. Full source code with comments can be found here.
function Get-ADPrincipalGroupMembershipRecursive( ) {
Param(
[string] $dsn,
[array]$groups = #()
)
$obj = Get-ADObject $dsn -Properties memberOf
foreach( $groupDsn in $obj.memberOf ) {
$tmpGrp = Get-ADObject $groupDsn -Properties memberOf
if( ($groups | where { $_.DistinguishedName -eq $groupDsn }).Count -eq 0 ) {
$groups += $tmpGrp
$groups = Get-ADPrincipalGroupMembershipRecursive $groupDsn $groups
}
}
return $groups
}
# Simple Example of how to use the function
$username = Read-Host -Prompt "Enter a username"
$groups = Get-ADPrincipalGroupMembershipRecursive (Get-ADUser $username).DistinguishedName
$groups | Sort-Object -Property name | Format-Table
No need for long scripts when it is a simple one liner..
QUEST Command
(Get-QADUser -Identity john -IncludedProperties MemberOf | Select-Object MemberOf).MemberOf
MS AD Command
(GET-ADUSER –Identity john –Properties MemberOf | Select-Object MemberOf).MemberOf
I find the MS AD cmd is faster but some people like the Quest ones better..
Steve
Use:
Get-ADPrincipalGroupMembership username | select name | export-CSV username.csv
This pipes output of the command into a CSV file.
First, import the ActiveDirectory module:
Import-Module ActiveDirectory
Then issue this command:
Get-ADGroupMember -Identity $group | foreach-object {
Write-Host $_.SamAccountName
}
This will display the members of the specified group.
It is just one line:
(get-aduser joe.bloggs -properties *).memberof
end of :)
The below works well:
get-aduser $username -Properties memberof | select -expand memberof
If you have a list of users:
$list = 'administrator','testuser1','testuser2'
$list | `
%{
$user = $_;
get-aduser $user -Properties memberof | `
select -expand memberof | `
%{new-object PSObject -property #{User=$user;Group=$_;}} `
}
Get-QADUser -SamAccountName LoginID | % {$_.MemberOf } | Get-QADGroup | select name
Get-ADUser -Filter { memberOf -RecursiveMatch "CN=Administrators,CN=Builtin,DC=Fabrikam,DC=com" } -SearchBase "CN=Administrator,CN=Users,DC=Fabrikam,DC=com" -SearchScope Base
## NOTE: The above command will return the user object (Administrator in this case) if it finds a match recursively in memberOf attribute.
I couldn't get the following to work for a particular user:
Get-ADPrincipalGroupMembership username
It threw an error that I was not willing to troubleshoot.
I did however come up with a different solution using Get-ADUser. I like it a bit better because if you don't know the account name then you can get it based off of a wildcard on the user's actual name. Just fill in PartOfUsersName and away it goes.
#Get the groups that list of users are the member of using a wildcard search
[string]$UserNameLike = "*PartOfUsersName*" #Use * for wildcards here
[array]$AccountNames = $(Get-ADUser -Filter {Name -like $UserNameLike}).SamAccountName
ForEach ($AccountName In $AccountNames) {
Write-Host "`nGETTING GROUPS FOR" $AccountName.ToUpper() ":"
(Get-ADUser -Identity $AccountName -Properties MemberOf|select MemberOf).MemberOf|
Get-ADGroup|select Name|sort name
}
Huge props to schmeckendeugler and 8DH for getting me to this solution. +1 to both of you.
To get it recursive, you can use:
<#
.SYNOPSIS
Get all the groups that a user is MemberOf.
.DESCRIPTION
This script retrieves all the groups that a user is MemberOf in a recursive way.
.PARAMETER SamAccountName
The name of the user you want to check #>
Param (
[String]$SamAccountName = 'test',
$DomainUsersGroup = 'CN=Domain Users,CN=Users,DC=domain,DC=net'
)
Function Get-ADMemberOf {
Param (
[Parameter(ValueFromPipeline)]
[PSObject[]]$Group,
[String]$DomainUsersGroup = 'CN=Domain Users,CN=Users,DC=grouphc,DC=net'
)
Process {
foreach ($G in $Group) {
$G | Get-ADGroup | Select -ExpandProperty Name
Get-ADGroup $G -Properties MemberOf| Select-Object Memberof | ForEach-Object {
Get-ADMemberOf $_.Memberof
}
}
}
}
$Groups = Get-ADUser $SamAccountName -Properties MemberOf | Select-Object -ExpandProperty MemberOf
$Groups += $DomainUsersGroup
$Groups | Get-ADMemberOf | Select -Unique | Sort-Object
Studying all comments presented gave me a starting point (thanks for such) but left me with several unresolved issues. As result here is my answer. The code snippet provided does a little more than what is asked for but it provides helpful debugging info.
[array] $script:groupsdns = #()
function Get-ADPrincipalGroupMembershipRecursive()
{
Param( [string] $dn, [int] $level = 0, [array] $groups = #() )
#if(($groupsdns | where { $_.DistinguishedName -eq $dn }).Count -ne 0 ) { return $groups } # dependency on next statement
#$groupsdns += (Get-ADObject $dn -Properties MemberOf) # Get-ADObject cannot find an object with identity
if ($script:groupsdns.Contains($dn)) { return $groups }
$script:groupsdns += $dn
$mo = $Null
$mo = Get-ADObject $dn -Properties MemberOf # Get-ADObject cannot find an object with identity
$group = ($dn + " (" + $level.ToString())
if ($mo -eq $Null) { $group += "!" }
$group += ")"
$groups += $group
foreach( $groupdn in $mo.MemberOf )
{
$groups = Get-ADPrincipalGroupMembershipRecursive -dn $groupdn -level ($level+1) -groups $groups
}
if ($level -le 0)
{
$primarygroupdn = (Get-ADUser -Identity $dn -Properties PrimaryGroup).PrimaryGroup
$groups = Get-ADPrincipalGroupMembershipRecursive -dn $primarygroupdn -level ($level+1) -groups $groups
}
return $groups
}
$adusergroups = Get-ADPrincipalGroupMembershipRecursive -dn $aduser.DistinguishedName
$adusergroups | ft -AutoSize | `
Out-File -Width 512 Get-ADPrincipalGroupMembershipRecursive.txt #-Append #-Wrap # | Sort-Object -Property Name
When you do not have privileges to consult other member groups but you do have the privilege to consult group members, you can do the following to build a map of which user has access to which groups.
$groups = get-adgroup -Filter * | sort name | select Name
$users = #{}
foreach($group in $groups) {
$groupUsers = #()
$groupUsers = Get-ADGroupMember -Identity $group.Name | Select-Object SamAccountName
$groupUsers | % {
if(!$users.ContainsKey($_.SamAccountName)){
$users[$_.SamAccountName] = #()
}
($users[$_.SamAccountName]) += ($group.Name)
}
}
For LOCAL users and groups (ie not in Active Directory), and if you don't want to, or aren't allowed to, or can't install RSAT and/or Install-WindowsFeature RSAT-AD-PowerShell and/or import-module activedirectory then here's a pure, pre-installed powershell (5.1+) way to do it.
(Note: Get-LocalGroup* used below are only available Powershell v5.1 and above. "...v5.1 was released along with the Windows 10 Anniversary Update on August 2, 2016, and in Windows Server 2016. ...[F]or Windows 7, Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, and Windows Server 2012 R2 [it] was released on January 19, 2017." (wikipedia))
$username = "user002"
Get-LocalGroup | ForEach-Object {
# the usernames are returned in the string form "computername\username"
if (Get-LocalGroupMember -Group $_ | Where-Object name -like "*\$username") {
$_.name
}
}
Example output:
Administrators
Users
Import-Module ActiveDirectory
Get-ADUser -SearchBase "OU=Users,DC=domain,DC=local" -Filter * | foreach-object {
write-host "User:" $_.Name -foreground green
Get-ADPrincipalGroupMembership $_.SamAccountName | foreach-object {
write-host "Member Of:" $_.name
}
}
Change the value of -SearchBase to reflect the OU you need to list the users from :)
This will list all of the users in that OU and show you which groups they are a member of.
Get-ADPrincipalGroupMembership USERLOGON | select name
This is the simplest way to just get the names:
Get-ADPrincipalGroupMembership "YourUserName"
# Returns
distinguishedName : CN=users,OU=test,DC=SomeWhere
GroupCategory : Security
GroupScope : Global
name : testGroup
objectClass : group
objectGUID : 2130ed49-24c4-4a17-88e6-dd4477d15a4c
SamAccountName : testGroup
SID : S-1-5-21-2114067515-1964795913-1973001494-71628
Add a select statement to trim the response or to get every user in an OU every group they are a user of:
foreach ($user in (get-aduser -SearchScope Subtree -SearchBase $oupath -filter * -Properties samaccountName, MemberOf | select samaccountName)){
Get-ADPrincipalGroupMembership $user.samaccountName | select name}
Almost all above solutions used the ActiveDirecotry module which might not be available by default in most cases.
I used below method. A bit indirect, but served my purpose.
List all available groups
Get-WmiObject -Class Win32_Group
And then list the groups the user belongs to
[System.Security.Principal.WindowsIdentity]::GetCurrent().Groups
Comparison can then be done via checking through the SIDs. This works for the logged in user. Please correct me if I am wrong. Completely new to PowerShell, but had to get this done for a work commitment.
With user input and fancy output formatting:
[CmdletBinding(SupportsShouldProcess=$True)]
Param(
[Parameter(Mandatory = $True)]
[String]$UserName
)
Import-Module ActiveDirectory
If ($UserName) {
$UserName = $UserName.ToUpper().Trim()
$Res = (Get-ADPrincipalGroupMembership $UserName | Measure-Object).Count
If ($Res -GT 0) {
Write-Output "`n"
Write-Output "$UserName AD Group Membership:"
Write-Output "==========================================================="
Get-ADPrincipalGroupMembership $UserName | Select-Object -Property Name, GroupScope, GroupCategory | Sort-Object -Property Name | FT -A
}
}
Putting this here for future reference. I'm in the midst of an email migration. I need to know each user account and its respective group membership, and also I need to know each group and its respective members.
I'm using the code block below to output a CSV for each user's group membership.
Get-ADUser -Filter * |`
ForEach-Object { `
$FileName = $_.SamAccountName + ".csv" ; `
$FileName ; `
Get-ADPrincipalGroupMembership $_ | `
Select-Object -Property SamAccountName, name, GroupScope, GroupCategory | `
Sort-Object -Property SamAccountName | `
Export-Csv -Path $FileName -Encoding ASCII ; `
}
The export process for the groups and their respective members was a little convoluted, but the below works. The output filenames include the type of group. Therefore, the email distribution groups I need are/should be the Universal and Global Distribution groups. I should be able to just delete or move the resulting TXT files I don't need.
Get-ADGroup -Filter * | `
Select-Object -Property Name, DistinguishedName, GroupScope, GroupCategory | `
Sort-Object -Property GroupScope, GroupCategory, Name | `
Export-Csv -Path ADGroupsNew.csv -Encoding ASCII
$MyCSV = Import-Csv -Path .\ADGroupsNew.csv -Encoding ASCII
$MyCSV | `
ForEach-Object { `
$FN = $_.GroupScope + ", " + $_.GroupCategory + ", " + $_.Name + ".txt" ; `
$FN ; `
Get-ADGroupMember -Identity $_.DistinguishedName | `
Out-File -FilePath $FN -Encoding ASCII ; $FN=""; `
}