I'm new to concourse and really excited to start working with it but I have a problem running the hello world example described here: https://concourse-ci.org/hello-world.html
I'm running this example on a concourse docker setup described here: https://concourse-ci.org/docker-repository.html.
Everything seems to work just fine but when I want to verify the results of both examples it keeps saying loading:
Task result loading (image)
Any idea why this would happen? I'm running docker-compose on Mac OS X (El Capitan) but that shouldn't matter right? Is there some additional configuration that I'm missing?
I also noticed when checking the network trace that the following request doesn't return any value: /api/v1/builds/<buildnumber>/events
It keeps saying 'pending'. Is that normal? I assume it isn't but I don't know the cause of this. Is there any logging I can check?
EDIT:
It seems to have something to do with the fact that it isn't running on localhost. When I use port forwarding and open concourse on localhost:8080 the results are shown just fine. Also mapping another hostname to 127.0.0.1 with port forwarding enabled works. So only when I communicate directly with the opened docker ports it doesn't work. Am I missing something?
After much frustration I found out that to cause of this issue was that Sophos Anti-Virus was blocking Concourse server-side events...
https://community.sophos.com/products/free-antivirus-tools-for-desktops/f/sophos-anti-virus-for-mac-home-edition/5750/sophos-av-blocks-server-sent-events-sse-on-mac-os-x-yosemite
Related
Following the doc from Rundeck, however the only button I have under "Sources tab" is "ResourceModelSource"
When I click that button I get a blank
PPS Issue happened on previous version - new to RunDeck, so I can't say that it EVER worked
I tried adding a manual resouces.xml in the project director y(Which I had to manually create, which tells me that's another issue) and reloading RD but that did not seem to work
While it's not the likely cause, I'll mention it here incase it IS relevant, I'm hosting on port 4440 however I'm using nginx to forward http (not https) requests on 443 to 4440, this is due to corp net sec policy.
I'm sure it's something where it's having an i/o issue on the local host, however I'm not seeing anything in the logs.
That is a known issue when you have Rundeck installed behind a proxy server, take a look at this: https://github.com/rundeck/rundeck/issues/6278 the solution is to set the grails.ServerURL (rundeck-config.properties file) with the exit URL defined for Rundeck in your proxy server (e.g: grails.serverURL=http://my_domain/rundeck), then restart the Rundeck service.
I've been using Mongo for a while now, and I never had any kind of errors. But today, I tried running the mongo command in my terminal and I got the following error:
Error connecting to 127.0.0.1:27017 :: caused by :: No connection could be made because the target machine actively refused it. :
I have my PATH variable for Mongo properly configured in my environment variables as follows:
C:\Program Files\MongoDB\Server\4.4\bin
so I doubt that is the issue. I remember going through my task manager yesterday and I accidentally terminated a program running in the background related to Mongo, but I can't seem to remember exactly what it was called, and I really think that that's the root of my problem, because before having terminated that Mongo program in my task manager I had never ran across this connection problem before.
By terminating a program in the background, I'm going to assume you didn't just end process, otherwise a simple computer restart would fix your issue. And in some cases, that same program would've relaunched when you launched MongoDB. But if you disabled a service and need to find which service needs to be running to be able to connect to your MongDB then I would suggest going through your Windows Services list and seeing which ones you disabled and looking one relating to TCP or SNMP.
This is because MongoDB Wire Protocol is a simple socket-based, request-response style protocol. You communicate with the database server through a regular TCP/IP socket and since you can't remember which one you "terminated" and any number of services related to networking can cause a dependency to be absent, I can't be more specific in helping you determine which one you need to turn back on and you'll have to do it through trial and error but I can at least offer you some guidance, hopefully.
Specifically you can either
Run system configuration using
msconfig
In a run box, navigating to the Services tab, order the list by Date Disabled to find the service that was disabled which correlates with when you when snooping through task manager, or
Run Task manager and navigate to the Services Tab, then Open Services, and order them by Status or by Name, and look for any service that includes TCP/IP, COM+, Port direction, etc. to see which one is disabled and change the configuration from anything but Disabled and then stat it manually and run MongDB again.
It's about as specific as I can get without knowing anything more than you terminated some program running in the background but I hope it helps.
The background process (daemon) for MongoDB is called 'mongod'. It's an executable in your bin directory inside your mongodb installation. You can just execute it in the terminal.
Run:
C:\Program Files\MongoDB\Server\4.4\bin\mongod.exe
I am trying to configure or setup the production environment of whatsapp business api as mentioned in the link https://developers.facebook.com/docs/whatsapp/installation/prod-single-instance
I have done everything mentioned in this my dockers are also running on port:9090 as can be seen in the image
still I can't access it. Whenever I try to call https://localhost:9090 the error with "This site can’t be reached" occurs. Whatsapp business api does not have good documentation or tutorials till now. So this site is the only last way for me.
I had a similar problem which could be your case, I saw the docker containers OK but nothing was working. After a day searching I saw where it happened, my problem was I installed mysql MANUALLY (not docker container) in the same instance where docker is running and in db.env I just used 127.0.0.1, this was passed literally to docker container, then looking at a the wait_on_mysql.sh script, the whastapp docker containers were waiting util the mysql ip has conectivity to actually do something and was printing "MySQL is not up yet - sleeping" each second, of course they wouldn't find any conectivity.
Since my instalation is for development, and I am already using such database to other stuff, my solution was to use the 172.17.0.1(docker gateway of the containers) IP instead, then add two sets of network iptables rules to the host to redirect from the docker containers IP to the IP binded by mysql when using such port (3306, the default in my case). After that everything works well. I think there are better solutions, but I didn't want to go far on it, you should evaluate you case if apply.
check the command:
docker-compose logs > debug_output.txt
That gives you insight about whats happening, hope it can helps someone.
I think your setup is already complete. You just need to start with the registration process and start sending messages. The containers are up and running but calling https://localhost:9090 won't send you any response as this is not any specified API endpoint expected to be used.
Since you're using prod single instance, the documentation can be found here which seems pretty straight forward. https://developers.facebook.com/docs/whatsapp/installation/prod-single-instance
You seem to have completed till the 7 steps. The next step can be to perform a health check to make sure it is healthy. The API endpoint for that would be https://localhost:9090/v1/health https://developers.facebook.com/docs/whatsapp/api/health
Has your db also been setup?
I cannot see it in the docker screenshot.
Also - you have to accept the certificate, as it does not have a public CA issues certificate.
First, I've finaly found out what the problem was but still, I decided to write this question+answer for others (because I spent 6 hours with this issue).
So, what's the problem...
I have a Cloud Foundry app (on public Bluemix) based on binary-buildpack. Two days ago, everything was OK. But not since yesterday. My app crashed (probably during restaging or something similar) and never started again. I tried to push the app again and still the same result. Really frustrating...
Something about the backend... There is a shell script in my instance that runs one binary application. Generaly, the application should connect to database server (also on public Bluemix).
The problem: Everytime I tried to start the app, it crashed immediately. This is what I found in logs: dial tcp: lookup databaseserverdomain.com on 0.0.0.0:53: server misbehaving.
There are a couple of similar problems on StackOverflow but no answer that would be helpful for me.
So, the error means that something went wrong with TCP connection. Ok, but what exactly? That's the question I'm going to answer myself...
Sounds like your binary isn't capable in properly handling connection problems. I would rather fix that part since I guess it will crash anyway when there is a connection issue.
The solution was actually simple...
I edited my shell script and add ping google.com -count 3 before launching the application to test if there is a stable network connection. This worked.
The application got 2 more seconds and it was enough for network/router/whatever to establish the connection.
Hmm.. It seems that there is something wrong with network routing on Cloud Foundry/Bluemix since yesterday.
I use gsutil tool for download archives from Google Storage.
I use next CMD command:
python c:\gsutil\gsutil cp gs://pubsite_prod_rev_XXXXXXXXXXXXX/YYYYY/*.zip C:\Tmp\gs
Everything works fine, but if I try to run that command from corporate proxy, I receive error:
Caught socket error, retrying: [Errno 10051] A socket operation was attempted to an unreachable network
I tried several times to set the proxy settings in .boto file, but all to no avail.
Someone faced with such a problem?
Thanks!
Please see the section "I'm connecting through a proxy server, what do I need to do?" at https://developers.google.com/storage/docs/faq#troubleshooting
Basically, you need to configure the proxy settings in your .boto file, and you need to ensure that your proxy allows traffic to accounts.google.com as well as to *.storage.googleapis.com.
A change was just merged into github yesterday that fixes some of the proxy support. Please try it out, or specifically, overwrite this file with your current copy:
https://github.com/GoogleCloudPlatform/gsutil/blob/master/gslib/util.py
I believe I am having the same problem with the proxy settings being ignored under Linux (Ubuntu 12.04.4 LTS) and gsutils 4.2 (downloaded today).
I've been watching tcpdump on the host to confirm that gsutils is attempting to directly route to Google IPs instead of to my proxy server.
It seems that on the first execution of a simple command like "gsutil -d ls" it will use my proxy settings specified .boto for the first POST and then switch back to attempting to route directly to Google instead of my proxy server.
Then if I CTRL-C and re-run the exact same command, the proxy setting is no longer used at all. This difference in behaviour baffles me. If I wait long enough, I think it will work for the initial request again so this suggests some form on caching taking place. I'm not 100% of this behaviour yet because I haven't been able to predict when it occurs.
I also noticed that it always first tries to connect to 169.254.169.254 on port 80 regardless of proxy settings. A grep shows that it's hardcoded into oauth2_client.py, test_utils.py, layer1.py, and utils.py (under different subdirectories of the gsutils root).
I've tried setting the http_proxy environment variable but it appears that there is code that unsets this.