I am trying to configure or setup the production environment of whatsapp business api as mentioned in the link https://developers.facebook.com/docs/whatsapp/installation/prod-single-instance
I have done everything mentioned in this my dockers are also running on port:9090 as can be seen in the image
still I can't access it. Whenever I try to call https://localhost:9090 the error with "This site can’t be reached" occurs. Whatsapp business api does not have good documentation or tutorials till now. So this site is the only last way for me.
I had a similar problem which could be your case, I saw the docker containers OK but nothing was working. After a day searching I saw where it happened, my problem was I installed mysql MANUALLY (not docker container) in the same instance where docker is running and in db.env I just used 127.0.0.1, this was passed literally to docker container, then looking at a the wait_on_mysql.sh script, the whastapp docker containers were waiting util the mysql ip has conectivity to actually do something and was printing "MySQL is not up yet - sleeping" each second, of course they wouldn't find any conectivity.
Since my instalation is for development, and I am already using such database to other stuff, my solution was to use the 172.17.0.1(docker gateway of the containers) IP instead, then add two sets of network iptables rules to the host to redirect from the docker containers IP to the IP binded by mysql when using such port (3306, the default in my case). After that everything works well. I think there are better solutions, but I didn't want to go far on it, you should evaluate you case if apply.
check the command:
docker-compose logs > debug_output.txt
That gives you insight about whats happening, hope it can helps someone.
I think your setup is already complete. You just need to start with the registration process and start sending messages. The containers are up and running but calling https://localhost:9090 won't send you any response as this is not any specified API endpoint expected to be used.
Since you're using prod single instance, the documentation can be found here which seems pretty straight forward. https://developers.facebook.com/docs/whatsapp/installation/prod-single-instance
You seem to have completed till the 7 steps. The next step can be to perform a health check to make sure it is healthy. The API endpoint for that would be https://localhost:9090/v1/health https://developers.facebook.com/docs/whatsapp/api/health
Has your db also been setup?
I cannot see it in the docker screenshot.
Also - you have to accept the certificate, as it does not have a public CA issues certificate.
Related
Following the doc from Rundeck, however the only button I have under "Sources tab" is "ResourceModelSource"
When I click that button I get a blank
PPS Issue happened on previous version - new to RunDeck, so I can't say that it EVER worked
I tried adding a manual resouces.xml in the project director y(Which I had to manually create, which tells me that's another issue) and reloading RD but that did not seem to work
While it's not the likely cause, I'll mention it here incase it IS relevant, I'm hosting on port 4440 however I'm using nginx to forward http (not https) requests on 443 to 4440, this is due to corp net sec policy.
I'm sure it's something where it's having an i/o issue on the local host, however I'm not seeing anything in the logs.
That is a known issue when you have Rundeck installed behind a proxy server, take a look at this: https://github.com/rundeck/rundeck/issues/6278 the solution is to set the grails.ServerURL (rundeck-config.properties file) with the exit URL defined for Rundeck in your proxy server (e.g: grails.serverURL=http://my_domain/rundeck), then restart the Rundeck service.
i want to use the "Mock Server" feature provided with https://restbird.org/ .
When starting restbird via the provided docker image, it listens on localhost:8080 by default.
Unfortunately the configured "Mock Server" instances still need to be started via the Web Frontend as it is described in the documentation here:
https://restbird.org/docs/mock-run.html#run-mock-server
Is there a way to automatically start the "Mock Server" instances when running the docker image without logging in into the backend (via admin/admin) and clicking the "start" button ?
Reason is, i want to start the mock server inside a gitlab pipeline where i have no further interaction possibilities after the container has been started.
I can not find anything like this in the documentation.
Thanks a lot for any clues - or if it is not possible i cam make a feature request.
I have found the solution myself. One can start a specific Mock Server as described in:
https://restbird.org/docs/API-MockServer.html#start-specific-mockserver-case
This can be scripted into my pipeline after executing the docker run command.
I have setup the apache cloudstack on CentOS 6.8 machine following quick installation guide. The management server and KVM are setup on the same machine. The management server is running without problems. I was able to add zone, pod, cluster, primary and secondary storage from the web interface. But when I tried to add an instance it is not showing any templates in the second stage as you can see in the screenshot
However, I am able to see two templates under Templates link in web UI.
But when I select the template and navigate to Zone tab, I see Timeout waiting for response from storage host and Ready field shows no.
When I check the management server logs, it seems there is an error when cloudstack tries to mount secondary storage for use. The below segment from cloudstack-management.log file describes this error.
2017-03-09 23:26:43,207 DEBUG [c.c.a.t.Request] (AgentManager-Handler-
14:null) (logid:) Seq 2-7686800138991304712: Processing: { Ans: , MgmtId:
279278805450918, via: 2, Ver: v1, Flags: 10, [{"com.cloud.agent.api.Answer":
{"result":false,"details":"com.cloud.utils.exception.CloudRuntimeException:
GetRootDir for nfs://172.16.10.2/export/secondary failed due to
com.cloud.utils.exception.CloudRuntimeException: Unable to mount
172.16.10.2:/export/secondary at /mnt/SecStorage/6e26529d-c659-3053-8acb-
817a77b6cfc6 due to mount.nfs: Connection timed out\n\tat
org.apache.cloudstack.storage.resource.NfsSecondaryStorageResource.getRootDir(Nf
sSecondaryStorageResource.java:2080)\n\tat
org.apache.cloudstack.storage.resource.NfsSecondaryStorageResource.execute(NfsSe
condaryStorageResource.java:1829)\n\tat
org.apache.cloudstack.storage.resource.NfsSecondaryStorageResource.executeReques
t(NfsSecondaryStorageResource.java:265)\n\tat
com.cloud.agent.Agent.processRequest(Agent.java:525)\n\tat
com.cloud.agent.Agent$AgentRequestHandler.doTask(Agent.java:833)\n\tat
com.cloud.utils.nio.Task.call(Task.java:83)\n\tat
com.cloud.utils.nio.Task.call(Task.java:29)\n\tat
java.util.concurrent.FutureTask.run(FutureTask.java:262)\n\tat
java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)\
n\tat
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)\
n\tat java.lang.Thread.run(Thread.java:745)\n","wait":0}}] }
Can anyone please guide me how to resolve this issue? I have been trying to figure it out for some hours now and don't know how to proceed further.
Edit 1: Please note that my LAN address was 10.103.72.50 which I assume is not /24 address. I tried to give CentOs a static IP by making the following settings in ifcg-eth0 file
DEVICE=eth0
HWADDR=52:54:00:B9:A6:C0
NM_CONTROLLED=no
ONBOOT=yes
BOOTPROTO=none
IPADDR=172.16.10.2
NETMASK=255.255.255.0
GATEWAY=172.16.10.1
DNS1=8.8.8.8
DNS2=8.8.4.4
But doing this would stop my internet. As a workaround, I reverted these changes and installed all the packages first. Then I changed the IP to static by the same configuration settings as above and ran the cloudstack management. Everything worked fine untill I bumped into this template thing. Please help me figure out what might have went wrong
I know I'm late, but for people trying out in the future, here it goes:
I hope you have successfully added a host as mentioned in Quick Install Guide before you changed your IP to static as it autoconfigures VLANs for different traffic and creates two bridges - generally with names 'cloud' or 'cloudbr'. Cloudstack uses the Secondary Storage System VM for doing all the storage-related operations in each Zone and Cluster. What seems to be the problem is that secondary storage system vm (SSVM) is not able to communicate with the management server at port 8250. If not, try manually mounting the NFS server's mount points in the SSVM shell. You can ssh into the SSVM using the below command:
ssh -i /var/cloudstack/management/.ssh/id_rsa -p 3922 root#<Private or Link local Ip address of SSVM>
I suggest you run the /usr/local/cloud/systemvm/ssvm-check.sh after doing ssh into the secondary storage system VM (assuming it is running) and has it's private, public and link local IP address. If that doesn't help you much, take a look at the secondary storage troubleshooting docs at Cloudstack.
I would further recommend, if anyone in future runs into similar issues, check if the SSVM is running and is in "Up" state in the System VMs section of Infrastructure tab and that you are able to open up a console session of it from the browser. If that is working go on to run the ssvm-check.sh script mentioned above which systematically checks each and every point of operation that SSVM executes. Even if console session cannot be opened up, you can still ssh using the link local IP address of SSVM which can be accessed by opening up details of SSVM and than execute the script. If it says, it cannot communicate with Management Server at port 8250, I recommend you check the iptables rules of management server and make sure all traffic is allowed at port 8250. A custom command to check the same is nc -v <mngmnt-server-ip> 8250. You can do a simple search and learn how to add port 8250 in your iptables rules if that is not opened. Next, you mentioned you used CentOS 6.8, so it probably uses older versions of nfs, so execute exportfs -a in your NFS server to make sure all the NFS shares are properly exported and there are no errors. I would recommend that you wait for the downloading status of CentOS 5.5 no GUI kvm template to be complete and its Ready status shown as 'Yes' before you start importing your own templates and ISOs to execute on VMs. Finally, if your ssvm-check.sh script shows everything is good and the download still does not start, you can run the command: service cloud restart and actually check if the service has gotten a PID using service cloud status as the older versions of system vm templates sometimes need us to manually start the cloud service using service cloud start even after the restart command. Restarting the cloud service in SSVM triggers the restart of downloading of all remaining templates and ISOs. Side note: the system VMs uses a Debian kernel if you want to do some more troubleshooting. Hope this helps.
I'm new to concourse and really excited to start working with it but I have a problem running the hello world example described here: https://concourse-ci.org/hello-world.html
I'm running this example on a concourse docker setup described here: https://concourse-ci.org/docker-repository.html.
Everything seems to work just fine but when I want to verify the results of both examples it keeps saying loading:
Task result loading (image)
Any idea why this would happen? I'm running docker-compose on Mac OS X (El Capitan) but that shouldn't matter right? Is there some additional configuration that I'm missing?
I also noticed when checking the network trace that the following request doesn't return any value: /api/v1/builds/<buildnumber>/events
It keeps saying 'pending'. Is that normal? I assume it isn't but I don't know the cause of this. Is there any logging I can check?
EDIT:
It seems to have something to do with the fact that it isn't running on localhost. When I use port forwarding and open concourse on localhost:8080 the results are shown just fine. Also mapping another hostname to 127.0.0.1 with port forwarding enabled works. So only when I communicate directly with the opened docker ports it doesn't work. Am I missing something?
After much frustration I found out that to cause of this issue was that Sophos Anti-Virus was blocking Concourse server-side events...
https://community.sophos.com/products/free-antivirus-tools-for-desktops/f/sophos-anti-virus-for-mac-home-edition/5750/sophos-av-blocks-server-sent-events-sse-on-mac-os-x-yosemite
I've read some articles recently on setting up AWS infrastructure w/o enabling SSH on Ec2 instances. My web app requires a binary to run. So how can I deploy my application to an ec2 instance w/o using ssh?
This was the article in question.
http://wblinks.com/notes/aws-tips-i-wish-id-known-before-i-started/
Although doable, like the article says, it requires to think about servers as ephemeral servers. A good example of this is web services that scale up and down depending on demand. If something goes wrong with one of the servers you can just terminate your server and spin up another one.
Generally, you can accomplish this using a pull model. For example at bootup pull your code from a git/mecurial repository and then execute scripts to setup your instance. The script will setup all the monitoring required to determine whether your server and application are up and running appropriately. You would still need an SSH client for this if you want to pull your code using ssh. (Although you could also do it through HTTPS)
You can also use configuration management tools that don't use ssh at all like Puppet or Chef. Essentially your node/server will pull all your application and server configuration from the Puppet master or the Chef server. The Puppet agent or Chef client would then perform all the configuration/deployment/monitoring changes for your application to run.
If you with this model I think one of the most critical components is monitoring. You need to know at all times if there's something wrong with one of your server and in the event something goes wrong discard the server and spin up a new one. (Even better if this whole process is automated)
Hope this helps.