Dears,
kindly note I have created an external login and a remote login as following:
sp_addremotelogin remoteserver,locallogin1, remotelogin1
sp_addexternallogin remoteserver,locallogin1, remotelogin1
and I log in by user locallogin1 to the localserver to the database localdb and try to create proxy table from remotedb1 on remoteserver but still get the login failed error, any body know why??
kindly note there is localuser1 aliased to locallogin1 , i.e there is no user 'locallogin1' (direct mapping) on the database localdb where I try to create proxy table, rather there is a user localuser1 is alias to locallogin1, is this related to the problem??
please advice
It looks like you are mixing some things up.For creating a proxy table, you do not need a 'remote login' as created by sp_remotelogin. You need the external login however, which should mao to an actual login in the remote server.
For more advice, you should post the exact steps taken plus the error output.
Dears,
kindly note that the problem is solved, the case was the password, the passwords for local login and remote login are different, so I add the remote password to sp_addexternallogin as follow:
exec sp_addexternlogin [remoteserver], [locallogin], [remotelogin], [remotepassword]
and every thing is well
Related
(I'm afraid I'm probably about to reveal myself as completely unfit for the task at hand!)
I'm trying to setup a Redshift cluster and database to help manage data for a class/group project.
I have a dc2.large cluster running with either default options, or what looked like the most generic in the couple of place I was forced to make entries.
I have downloaded Aginity (Win64) as it is described as being specialized for Redshift. That said, I can't find any instructions for connecting using it. The connection dialog requests the follwoing:
Server: using the endpoint for my cluster (less :57xx at the end).
UserID: the Master username for the database defined for the cluster.
Password: to match the UserID
SSL Mode (Disable, Allow, Prefer, Require): trying various options
Database: as named in cluster setup
Port: as defined in cluster setup
I can't get it to connect ("failed to establish connection") and don't know if I'm entering something wrong in Aginity or if I haven't set up my cluster properly.
Message: Failed to establish a connection to 'abc1234-smtm.crone7m2jcwv.us-east-1.redshift.amazonaws.com'.
Type : Npgsql.NpgsqlException
Source : Npgsql
Trace : at Npgsql.NpgsqlClosedState.Open(NpgsqlConnector context, Int32 timeout)
at Npgsql.NpgsqlConnector.Open()
at Npgsql.NpgsqlConnection.Open()
at Aginity.MPP.Common.BaseDataProvider.get_Connection()
at Aginity.MPP.Common.BaseDataProvider.CreateCommand(String commandText, CommandType commandType, IDataParameter[] commandParams)
at Aginity.MPP.Common.BaseDataProvider.ExecuteReader(String commandText, CommandType commandType, IDataParameter[] commandParams)
--- Inner Exception: ---
......
It seems there is not enough information going into Aginity to authorize connection to my cluster - no account credential are supplied. For UserID, am I meant to enter the ID of a valid user? Can I use the root account? What would the ID look like? I have setup a User with FullAccess to S3 and Redshift, then entered the UserID in this format
arn:aws:iam::600123456789:user/john
along with the matching password, but that hasn't worked either.
The only training/tutorial I have been able to find/do on this is the Intro AWS direct you to, at https://qwiklabs.com/focuses/2366, which uses a web-based client that I can't find outside of the tutorial (pgweb).
Any advice what I am doing wrong, and how to do it right?
Well, I think I got it working - I haven't had a chance to see if I can actually create table yet, but it seems to be connected. I had to allow inbound traffic from outside the VPC, as per the above snapshot.
I'm guessing there's a better way than opening it up to all IP addresses, but I don't know the users' (fellow team members) IPs, and aren't they all subject to change depending on the device they're using to connect?
How does one go about getting inside the VPC to connect that way, presumably more securely?
I have a FreeSWITCH v1.6.13 on my Debian 8( From git) and it is OK.
After that i installed the last FusionPBX to manage my PBX telephony FS.
But it gives me error : 403 You must define a domain called x.x.x.x in your directory...
Both i installed by FusionPBX guid in their web site.
FreeSWITCH and FusionPBX.
Im going crazy cause about 4 days i Am working and not a good result yet.
I know Fusion store data in DB and i give him a Pgsql user name and password.( not the default one it suggest after ./install command) and also FS with --enable-core-pgsql-supprt in ./configureaiton with -C.
And i searched a lot, and all says as this link.
But when i go to sip status from FusionPBX, it says that my ip is correct, and also i did what they say but no success.
Just one time it worked! and i did not why it work.
And after it does not work and again says 403 you must ....
And after that i create an extention, i go to FS terminal and type user_exist 101 (user i created in fusionpbx)it return me false.
Can it be DB issue?
I do not know why just one time it worked and after i after that again gave me 403 error.
Cause i did changed a lot i could not understand what was the cause to work it.
Is it a bug?
What exactly i am doing wrong??
Really any help will appreciate.
EDIT 1 :
My softphone is android zoiper for test the created extention in fusion.
Make sure you are using the "Extension" number as the username in zoiper. Also go to the extension's settings page to see the current password for that extension. I have used Zoiper on my android phone with FusionPBX. So I know it will work.
Zoiper account settings will be:
Account Name: Any name.
Hostname: ip/hostname of FusionPBX
Username: extension number
Password: extension password.
One thing that confused me a lot when I first tried fusionpbx is the "Users" vs "Extensions". From what I can tell "Users" are only for logging into the web UI of FusionPBX, for things like checking voicemail and managing other features. The "Users" are not SIP users.
It's the first time that I am using a web host, and my problem is that the website redirects me to a default website page. Here is the link : http://173.193.234.99/
How could I fix that within CPanel ?
Do you have full on access to your server? If so try uploading some files and see if you can access them. Your host name is the IP address you've got, your username and password should've been provided to you by your host.
If that still does not work I would recommend heeding the advice as seen on the page:
"If you are the owner of this website and were not expecting to see this page, please contact your hosting provider."
But again, it looks normal to me, try uploading an index.html file and see if that works.
I have been trying to use the library provided here, but I always get an error.
The command I am running:
GCUpload.exe -u:myUserName -p:myPassword -n:myProjectName -s:Test -f:myFile
but I get the error of:
That's an error. Your client does not have the permission to get URL /files from this server.
(Client IP address: <My IP address>)
Please sign in to upload a file.
I can log in to google code with the user and the project exists. What am I doing wrong and how can I solve this issue? Thanks.
EDIT: Maybe some credentials must be provided, but I'm not sure what is needed. I've tried this command without success:
net use \\code.google.com\projectname /user:username password
The error is:
The network path was not found.
The problem was that I have run the command with my google user's password, but there is a separate Google Code password which can be found here, but you have to be logged in to see it.
I am using SQL Server CE 4.0 with WebApi on Windows Azure Websites. I have been successfully able to deploy SQL Server CE. The weird problem I am facing is that my site is able to log me in using the same DB but I am not able to use any of the controllers to fetch the data.
I am using same connection string for both. The only difference is that for logging in I am using WebSecurity as I have enabled OAuth on the site.
Can someone throw some light on how to debug and fix this issue? The error I am getting for the calls is
Format of the initialization string does not conform to specification
starting at index 0.
However the same string works for authentication, change password, adding OAuth connections etc.
Thanks in advance
I connected to the site using FTP. I was not giving the site name as domain name and it was denying me access earlier. On connecting, I got hold of the Web.config file and I found something interesting. While publishing the site, the web.config was modified to add another connectionstring with the name of context_DatabasePublish.
This string had following details connectionString="ContextName_DatabasePublish.ConnetionString" providerName="System.Data.SqlClient"
Also there was a new section called context added to the entityframework section of the config file with all the details for the context to use but again pointing to same connection string. The provider it is using is sql and not sqlce. I believe that is the reason it was failing.
I uploaded my normal config file and the site started working. I need to explore more on to why and how the new connection string got added. I will post the details in comments.