I have some code that opens a popover window that displays some text. This is done by an action segue rather than actual code in a storyboard. Is there any way, that I can load into a different view by pressing a button on the popover view and have it load into the next view? I've tried using another action segue, but it puts a popover into my current popover over the button that I press. Thanks!
This kind of thing can't be done with just storyboards; some code will be necessary.
Here's how I would do this: instead of trying to use two separate popovers, use one popover with kind of a "nested" setup. The popover's content view controller would contain, say, a Page1ViewController and a Page2ViewController. When first displayed, the main controller would install page 1's view. You could maybe wire the action from page 1's button directly to the main controller, but I recommend that you use delegation for this. Create a protocol that's something like Page1ViewControllerDelegate and adopt the protocol in your main controller, then in the delegate method for page1ControllerRequestTransition(_:) or whatever you choose, just grab the page 1 view out and swap the page 2 view in. You can even have the two views be different sizes; the popover will automatically adjust itself.
Oh, and don't forget to disable translatesAutoresizingMaskIntoConstraints and add appropriate constraints to fix the four sides of each page's view.
Related
I'm trying to execute code when a button is pressed for an application but I can't find how to change the views after the code is executed. Is there a way to switch views how I want to or is there another way? Thank you in advanced, I'm very new to xcode.
edit: I'm trying to go from one view to another, not the view controller and yes I have one storyboard that I planned on using for the whole project if possible.
To execute code when a button is pressed, you have to set up a method that the button is hooked into. Because you said you're using storyboards, I'll assume your button is on the storyboard. Go to the assistant editor, hold ctrl, and click-and-drag from the button to the view controller's .m file (#implementation section). This will create an IBAction method, and any code in this method will execute whenever you press the button.
The method will look like this:
- (IBAction)aButtonPress:(id)sender {
}
According to your comments, you say you only want to change the on-screen view, and not transition from one view to the next.
Views are added and removed with the following methods:
[aSuperview addSubview:aSubview];
[aSubview removeFromSuperview];
I can't really tell you much else with a lot more detail from you... and even though I asked twice in the comments and you said you only want to change the view, not the view controller... I think you probably need to transition to a new view controller. Impossible to know for sure as you've given almost no detail...
But if you want to transition between view controllers (which also transitions views), then ...
Create two view controllers on the storyboard. Hook them together with a segue, and give that segue a name. Now, to perform that segue in code:
[self performSegueWithIdentifier:#"YOUR_SEGUE_NAME" sender:self];
I have two subviews that load. One is a tabbar thats inside a viewcontroller which gets loaded fairly early on and the second is a view that appears when a tab bar item is pressed.
however when this subview is added it loads over the tabbar subview.. is there a way to bring to front or something along those lines?
There is a whole plethora of methods to choose from...see the section Managing the View Hierarchy in the UIView docs
I've been looking everywhere but can't seem to find any examples/tutorials for my situation (not sure how to google it..)
So i have a window where a portion of it should be static (buttons and such) and there is a dynamic part (bottom leftish) that should change subviews.
So what i'm looking for is a way so that clicking the buttons in the static area will change the dynamic area to a view of my choice. I have no idea how to do this using the IB, but doing it programatically seems the only way. Any suggestions(I do not want to use a tab bar controller)?
Oh, and is there a benefit to making views and such programatically vs through the IB?
Thanks!
You can also achieve it programatically. Just create another viewcontroller class (as many as u want). In the loadView method of it create a UIView in the coordinates where u want to add the subview in the current view. Now create an instance of this viewcontroller class in the currentview controller and add it as a subview. You will get the subview at the desired location.If u want to change it dynamically create as many views and then add them to the array and change them whenever the button is clicked.
Hope this helps.
You should perform the switch in your view controller. The static buttons can have their actions hooked up to that controller (in IB), which can have an outlet (in IB) to the subviews and perform the swap.
As for when you should use IB, see this question.
You can do it from interface builder as well. You just need to take viewController from interface builder drag-n-drop to main window. assign IBAction to all buttons to add different viewController's view to main window just make their frame some smaller.
if u want to change or views by click on button then u chose segmentcontrol switch. and cod for each segment like as when click on segment 0 then open first sub view and when click on segment1 then open second sub view. And make by default unselected so that ur static view will appear initially lunching of view.
I have 3 view controllers, one is the root, which pushes the next, which pushes the next. Each time you can go back (pop), using the normal back button that appears by default.
However when the 3rd view is visible, when the user taps the back button I need it to skip out the the 2nd view controller, and go (pop) directly to the root view controller.
How can I override the default back button behaviour? (I'd like to keep the shape of the back button, and not replace it with a square bar button)
You could try to have an object implement UINavigationControllerDelegate and enforce this behavior. You could also have a designer create the same size and shape asset and you could use this as the background for a button.
However, I'd rethink your UI if you really need to do this. It is contrary to the user's expectations of how a navigation controller should work.
I'd like to display some small tutorial dialogs on top of my exiting views. I want to be able to see my existing views behind these smaller views.
Do I have to use view controllers in the same I way I would me normal views, and presentmodalviewcontroller etc ?
I haven't tried making a smaller view in interface builder before.
Also, say I want to move to another one of my existing views, full screen, while in my tutorial view. How would I close my tutorial view move to the next full screen view and launch another tutorial view ?
Example code or pseudo code would be welcome.
If your tutorial dialogs are just text, you could use UIAlertView to show the information to the user, so they can just read it and click the OK button when they're done. It's a very easy way to show some text to the user.
If you need to include images or other interactive items in your tutorial dialogs, the easiest way might be for you to just have your fullscreen view's view controller create a new view and put it up. So in this case, you'd create your view in Interface Builder, and when you want to show it, instantiate it using -[UIBundle loadNibNamed:owner:options:] and add it as a subview of your main view. Of course, it may even be easier to create the tutorial view programmatically from your view controller rather than using a nib for them at all.
Regarding the question of moving on to another fullscreen view, you would probably want to look into embedding your view controllers in a UINavigationController. This would allow you to push from the first controller to the second very easily, and the user would be able to just tap the Back button to get back to the first. If you're not looking for a navigation bar type of interface, you could present the second view controller as a modal view controller by calling -[UIViewController presentModalViewController:animated:] on your main view controller. This will pop up the second view controller fullscreen, and the user can dismiss it when they're done. Check out Apple's great documentation on UINavigationController to get a feel for how to use that:
http://developer.apple.com/library/ios/#featuredarticles/ViewControllerPGforiPhoneOS/NavigationControllers/NavigationControllers.html%23//apple_ref/doc/uid/TP40007457-CH103-SW1
I would think that you could use existing UIViewController and simply add a new UIView that is of desired dimensions, that sits in front of other views and which is non-opaque and has alpha less than 1.
If you want a general purpose tutorial mechanism that can be placed atop any one of many UIViewControllers, then you would want to extract the navigation logic, etc.
Sorry, no code - just a few quick thoughts.