How can I upload folders to GitHub? I have all of my code in a folder, containing 98 files, on my desktop. I know how to upload files, but it there a way to upload the entire folder?
Thanks!
This is Web GUI of a GitHub repository:
Drag and drop your folder to the above area. When you upload too much folder/files, GitHub will notice you:
Yowza, that’s a lot of files. Try again with fewer than 100 files.
and add commit message
And press button Commit changes is the last step.
You can also use the command line, Change directory where your folder is located then type the following :
git init
git add <folder1> <folder2> <etc.>
git commit -m "Your message about the commit"
git remote add origin https://github.com/yourUsername/yourRepository.git
git push -u origin master
git push origin master
I Understand where you are coming from.
The solution provided by #James Graham may not work in certain cases. The Drag and Drop Functionality may cease to exist. See below link when that happens:
https://www.reddit.com/r/github/comments/meuxtg/github_drag_and_drop_not_working/
If somebody wants to avoid the shell and all the commands and wants to have a UI to do that,Github Desktop is one of the way to go forward.
Steps to follow to install and use Github Desktop:
I am assuming you know the difference between local repo and remote repo
Install Github Desktop
Create a repository locally on your hard drive by using github desktop. This will automatically create files like .git and .gitattributes. It also asks to create a README.md file, always best practice is to create it and edit it informing readers about your project overview, installation steps etc. README.md is rendered in Markdown and can also render HTML. See more about Markdown here: Markdown Cheatsheet guide
Copy and Paste all the folders and files that you want to upload(basically the right terminology is "Push" ) into this newly created local repository. Be aware of the directory structure as the exact same directory structure will be replicated on your remote repository.
Go to github desktop, as soon as you paste files in the local repo, you will see them as changes here. All you need to do is commit these changes with a comment. This will be your "First or Initial Commit" to the repo.
Next Github repo will ask whether you want to publish these to its remote repository. Click "Publish" Note Publish is just a one time operations. Going forward any further changes you make to local repo will be seen in github desktop and you need to again follow the loop of "Commit local->Fetch from remote->Push to Remote. As long as you are the only developer working on a project you need not go into other mechanics of git branches etc.
To verify if your repo is published remotely login to your github profile on the web and see your repository sitting there. This your remote repo which you effectively created from your local repo by using Github desktop.
I've just gone through that process again. Always end up cloning the repo locally, upload the folder I want to have in that repo to that cloned location, commit the changes and then push it.
Note that if you're dealing with large files, you'll need to consider using something like Git LFS.
For those still using master, this was changed to main
echo "# repo-name" >> README.md
git init
git add README.md
git commit -m "first commit"
git branch -M main
git remote add origin https://github.com/username/repo-name.git
git push -u origin main
Related
I created my first GitHub repository using GitHub Desktop (Windows). It is a real mess with many revisions that are quite meaningless and some versions of files that I would rather were never uploaded. This was the result of a lot of experimenting to get the feel for how things would appear on GitHub. I want to get rid of all the history versions.
I am tempted to just copy my files on my drive to another folder then delete the repository folder from my drive. Also delete it from GitHub.
Then create a new repository with GitHub Desktop, perhaps with the same name or with a different name then rename it to the original. Could it be a simple as that or will GitHub still retain the files somewhere?
I haven't tried this because in my searching I keep finding all the complex steps to be performed to remove histories or remove files.
I sort of feel that what I am proposing is too simple.
Any opinions?
All of this got too confusing.
I just did what I said in the start of the thread.
It seems GitHub Desktop has some Username/Password problem and won't let me "Publish branch".
So I went to GitHub and created a new repository and uploaded all the files from my local folder.
It looks good to me.
There may be problems in the future. I guess I'll cross that bridge when (if) I come to it.
An alternative approach is to switch to command line and:
delete the .git folder in your repository
recreate it (git init .)
reset the origin remote: git remote add origin https://github.com//
Make a first commit with your current content:
git add .
git commit -m "first commit"
overwrite everything on the remote repo
git push --force -u origin master
The end result will be the same repo but with only one commit.
You can then switch back to GitHub Desktop.
From here.
First make sure you have Git for Windows installed, you are going to need to do git commands manually sooner or later.
Go to your local repository on your computer where your project is located. It's a good idea to show hidden files so you can see that you have the .git-folder and that the .gitignore-file is in place.
Go to the folder where the .git-folder is, right-click and click git bash here.
Now enter these commands:
Create Orphan Branch – Create a new orphan branch in git repository. The newly created branch will not show in ‘git branch’ command.
git checkout --orphan temp_branch
Add Files to Branch – Now add all files to newly created branch and commit them using following commands. Don't forget .gitignore!
git add .
git commit -m "the first commit"
Delete master Branch – Now you can delete the master branch from your git repository.
git branch -D master
Rename Current Branch – After deleting the master branch, let’s rename newly created branch name to master.
git branch -m master
Push Changes – You have completed the changes to your local git repository. Finally, push your changes to the remote (Github) repository forcefully.
git push -f origin master
Git overview
I am still a beginner and I locally made a folder of my Project and uploaded it as a repository in GitHub using GitHubDesktop. Now I changed the structure of the files (deleted some sub-folders and moved files here and there locally). Now I don't see those changes in my GitHubDesktopas something which I can push to the GitHub online and reflect the changes there.
I am not sure how to achieve that:
(One way I can think is to reclone and download the online GitHub repository to local, move the changed files again and then commit from GitHubDesktop) , but I am not sure if it will work because I did the almost the same thing just without recloning: but after the reorganization, the changes are not appearing in my GitHubDekstop which I can commit.
Any advice would be great. Thank you.
This is my repository (https://github.com/grammilo/Codes) whose organization I want to copy from a local folder which goes by the same name and was previously cloned from it.
When you go to the directory of the repository in your terminal, checkout your master branch
git checkout master
and use
git diff
this will display any changes made to the files and file structure in green and red. You can delete folders and files directly from your file system or from the terminal, whichever you prefer and these changes will display when you use git diff. After your changes are made use
git add
this will stage your changes to be committed. You can use
git status
to make sure your changes are ones you would like to make.
Use
git pull
to pull any changes from your repository and when you are ready to commit your changes simply use
git push origin master
this will commit your changes to the remote repository on GitHub from your command line without using GitHub Desktop. Check out the git documentation for more in depth explanations but that should achieve what you're looking for.
I am new to GitHub and I have to submit one assignment through GitHub.
I have been reading this blog for uploading files through github, but am not able to see any button labeled Upload files on my home screen of the repository
What am I missing?
See the "or push an existing repository from the command line" to push existant files to your repository. You won't have to load them by a form but with your command line from your project.
Github does not work like cloud storage platform. You actually need to have git installed on your computer in order to be able to push code to your repositories.
First of all, you need to install git( download links here ).
Then you need to init your local repositories with git init. Caution you need to run this command inside the directory your code is placed.
Run git add --all to stage the changes
Run git commit -m "your message" to commit your changes
Run git add remote origin (repo_link or ssh) to add your Github repo as a remote repository
Run git push -u origin master to push your master branch to remote origin
This might look a lot at first place but, you 'll get used to it really soon
Alternative
You can also the git and GitHub GUI which are much friendlier for a beginner.
We had a number of developers working on a large website project using Git. We have a GitHub repository and then we have the website on the server, plus all the developers have their local versions.
When we finally launched the project, I got lazy (hangs head in shame) and started making changes directly to the server, without pushing them back to the Github repo. However, other people made changes to the repo, for reasons I don't quite understand, that were never pushed down to the server and are now either outdated or wrong. We have been doing this for almost seven months.
Now the server and repo are hopelessly out of sync. I would now like to get the most updated version of the site (which is the server) back up to the Git repository so we can begin another round of development. I basically want to start with a fresh copy of what is on the server.
How would you recommend I proceed? That was the first time I had used Git. It didn't seem like such a big deal at the time but now seems like it is harder to start up again than I thought.
I have looked for instructions and don't really see anything that fits. Because I am not super confident in my Git skills, I am afraid to just start trying the few ideas I did find and losing what I have on the server.
(I know I could restore from a backup if I really messed it up but would prefer not to do that as it would take the site down.)
Can I uninstall git and start again with a fresh repo? Or is there a safe way to push the current version up to the repo?
Thanks for your help.
UPDATE: I found this answer elsewhere (Replace GitHub repo while preserving issues, wiki, etc) but I am not sure how to do this:
cd into "new" repository
git remote add origin git#github.com:myusername/myrepository (replacing myusername & myrepository accordingly)
git push --force origin master
Possibly delete other remote branches and push new ones.
Not sure what they mean by "new repository"
Make a new branch and push it to GH.
Make a new branch based on the previous
branch.
Switch to the new branch (created on #2).
Delete all the files and folders on this branch repository
except the .git folder and contains
(maintain the README.md,
.gitignore and other files if you want it).
Copy all the files from the server except
.git folder.
Commit.
Switch to local Master (created on #1)
Merge this new branch with the previous one.
Solve conflicts
(I use SmartGITthat have a visual conflict solver and helps me a lot, but you can use gitdiffif you don't want a visual interface)
Commit
Push it to GH.
I hope this helps
I figured this out. What I did was:
Make a new branch on Github to effectively store a backup.
$ git add . to stage all changes
$ git commit -m "Commit message" to commit changes
$ git push --force origin master to force changes from server to remote branch master
Once I did this, there were still hundreds of files I had deleted on the server that were not reflected on the remote github.com repository. I used the following:
$ git rm $(git ls-files --deleted)
See Removing multiple files from a Git repo that have already been deleted from disk
Then repeated git commit and git push. Now my github repo matches my server exactly.
I have not yet deleted the "backup" branch I created on github but I will.
Hope that helps someone.
I created a repository in github and then issued the following command on my local box:
git push origin master
Now I see all of the files on github.
I would like to start work on making changes. With this in mind I clicked the fork button on the
github screen. However nothing happens. I see a message at the bottom of my browser screen but
that's all.
How do I copy my "forked" version to my local computer?
If you want to work on your GitHub repo, you need to clone it locally.
If you want others to contribute directly in your repo, you need to declare them as collaborator.
You could set up a dedicated branch for them to use.
If you don't want them to push directly to your repo, then your colleagues need to fork your repo, and clone their fork locally.
If it's your repository, there's no need to fork the repo.
If I read your question correctly, to make changes, simply edit the files in question in a text editor, save them, open terminal, change directory to the one with the code, and write git add . then git commit -m "Your commit message" and then git push. The new code should be updated in GitHub as a new commit.