I have a SKAction that runs an action if an area on the screen is touched. However I cannot get the SKanimate to only run through the SKarray once (both actions that is), it seems to run around 4 times. The count parameter doesn't seem to make any difference either. Any help on how to get it to run through the frames in the array just once then stop would be appreciated!
//Touch location check
for touch in touches {
let location = touch.location(in: self)
if myButton.contains(location) {
//run shoot animation.
MainGuy.run(SKAction.repeat(SKAction.animate(with: TextureArrayShoot, timePerFrame: 0.10), count: 1),withKey: "outlaw")
print ("touched")
let witchaction = SKAction.animate(with: TextureArrayWitch, timePerFrame: 0.20)
witch.run(witchaction)
missedLabel1.text = "Good Shot!"
}
}
Apologies - solved it. There were 3 arrays for sprites in a row, and the first one wasn't closed properly and encapsulating the other two, meaning the 'I' in for I in...was being used 3 times!
Related
I'm writing an application that displays chemical reactions and molecules in 3D. I read in all the values and positions of each atom from a text file and I am creating each atom shape with SCNSpheres. I have all the other values I need read in properly, but I can't figure out how to add keyframe animations to each node object in my scene.
I set up the molecules like this in ViewController.swift
func makeAtom(atomName: String, coords: [Double], scene: SCNScene) {
guard let radius = atomRadii[atomName]?.atomicRadius else { return }
atoms.append(Atom(name: atomName, x: coords[0], y: coords[1], z: coords[2], radius: radius, positions: []))
let atomGeometry = SCNSphere(radius: CGFloat(radius))
let atomNode = SCNNode(geometry: atomGeometry)
atomNode.position = SCNVector3(coords[0], coords[1], coords[2])
scene.rootNode.addChildNode(atomNode)
atomNodes.append(atomNode)
}
I know that the CAKeyframeAnimations are supposed to be set up like this
let animation = CAKeyframeAnimation()
animation.keyPath = "position.y"
animation.values = [0, 300, 0]
animation.keyTimes = [0, 0.5, 1]
animation.duration = 2
animation.isAdditive = true
vw.layer.add(animation, forKey: "move")
I just don't know where I should be declaring these animations and how the layers factor into all this. What layer should I be adding the animations to? And how can I trigger them to play? I've been searching all over the internet for help with this but I can't find anything that just shows a simple implementation.
I can provide more code if need be, I'm pretty new to StackOverflow and want to make sure I'm doing this right.
You can do it different ways, but I like this method: 58001288 (my answer here) as you can pre-build some animations using scenekit and then run them as a sequence.
Per the comment.. needed more room.
A sequence is a fixed thing. You can start, repeat, and stop it. However, it's hard to interact with it during phases.
If you really need to do that, then one way is to break up your sequence into its parts and call the next one yourself after a completion handler of the current one. I keep an array and a counter so that I know where I am. So basically it's just a queue of actions that I manage - if I'm on a certain step and the button is pressed, then I can cancel all current actions, set the desired effect, and restart it.
Edit:
The completion handler calls itself at the end of the function and advances its own array count so that the next one in the list can be called. This is obviously a bit dangerous, so I would use sparingly, but that's how I did it. I started mine on a timer, then don't forget to clean it up. I had a global GAME_ACTIVE switch and within the code I checked for it before calling myself again.
Edit2: This is actually a moveTo, but it's still just a custom set of SCNActions that calls itself when complete based on duration so that it immediately goes to the next one without a delay.
func moveTo()
{
let vPanelName = moves[moveCount]
let vLaneNode = grid.gridPanels[vPanelName]!.laneNodes[lane]
let vAction = SCNAction.move(to: vLaneNode.presentation.position, duration: TimeInterval(data.getAttackSpeed(vGameType: gameType)))
node.runAction(vAction, completionHandler:
{
self.moveCount += 1
if(self.moveCount >= self.moves.count - 1)
{
self.killMe(vRealKill: false)
return
}
else
{
self.moveTo()
}
})
}
EDIT: I have solved the problem and will post the solution in the next couple of days.
I'm building 3D achievements similar to Apple's Activity app.
I've already loaded my 3D model (a scene with a single node), can show it, and can tap on it to apply a rotational force:
#objc func objectTapped(_ gesture: UITapGestureRecognizer) {
let tapLocation = gesture.location(in: scnView)
let hitResults = scnView.hitTest(tapLocation, options: [:])
if let tappedNode = (hitResults.first { $0.node === badgeNode })?.node {
let pos = Float(tapLocation.x) - tappedNode.boundingBox.max.x
let tappedVector = SCNVector4(x: 0, y: pos, z: 0, w: 0.1)
tappedNode.physicsBody?.applyTorque(tappedVector,
asImpulse: true)
}
}
This works fine. Now to the tricky part:
I want the node to rotate until it either shows its front or backside (like in the Activity app), where it then should stop. It should stop naturally, which means it can overshoot a bit and then return.
To describe it with pictures - here I am holding the node in this position...
...and if I let go of the node, it will rotate to show the front side, which includes a little bit of overshooting. This is the ending position:
Since I'm quite new to SceneKit, I have troubles figuring out how to achieve this effect. It seems like I can achieve that by using SceneKit objects like gravity fields, without having to calculate a whole lot of stuff by myself, or at least that's what I'm hoping for.
I don't necessarily ask for a full solution, I basically just need a point in the right direction. Thanks in advance!
im very new to swift, i have made a sprite kit game with a coin sprite. I want to make it spin so ive made 6 sprites in total. Im trying to get a continuous loop of spinning by quickly changing the sprites. I have tried to do this with the code below.
//This will hold all of the coin spinning sprites
let coinTextures : NSMutableArray = []
//There are 6 in total, so loop through and add them
for i in 0..<6 {
let texture : SKTexture = SKTexture(imageNamed: "Coin\(i + 1)")
coinTextures.insert(texture, at: i)
}
//When printing coinTextures, they have all been added
//Define the animation with a wait time of 0.1 seconds, also repeat forever
let coinAnimation = SKAction.repeatForever(SKAction.animate(with: coinTextures as! [SKTexture], timePerFrame: 0.1))
//Get the coin i want to spin and run the action!
SKAction.run(coinAnimation, onChildWithName: "coin1")
As i said im very new so im not sure what ive done wrong here.
Also the name of the coin i want to spin is "coin1" and the sprites so from coin1 to coin 6
You are almost there.
The problem is that your final line creates an action, but not running it on anything...
You got two alternatives:
1) Run your action on your scene
// Create an action that will run on a child
let action = SKAction.run(coinAnimation, onChildWithName: "coin1")
scene?.run(action)
or
2) Run the action directly on the child
// Assuming that you have a reference to coin1
coin1.run(coinAnimation)
As a sidenote, your array could be declared as var coinTextures: [SKTexture] = [], you can use append to add items to it and avoid the casting when you pass the textures to the action.
Or you can use a more compact form to construct your textures array:
let coinTextures = (1...6).map { SKTexture(imageNamed: "Coin\($0)") }
I hope that this makes sense
I would need help with this while loop - what I'm trying to do is slow down the whole process of removing and adding new circles while radius is changing every time this happens. I'm becoming really desperate, I've tried using both dispatch_after and sleep inside the loop (which I found online) but neither of them is suitable, they basically stop the whole app. If I put them in the while loop, nothing happens. Thanks in advance!
while radius < 100 {
self.removeAllChildren()
addCircle()
radius++
print(radius)
}
Basically you just need to do few simple things:
Wait for a certain duration and add a node to the scene
Repeat this step forever (or certain number of times)
Here is the example of how you can do it. The important part is action sequence. You create the step above, and repeat it forever. Each time you check radius value and based on that you stop the action (remove it by the key). And that's it. You can change spawning speed by changing action's duration parameter.
Using NSTimer might seem like an easier solution, but NSTimer doesn't respect node's (or scene's or view's) paused state. So, imagine this situation:
You start spawning of nodes
User receive phone call and app automatically goes to background
Because NSTimer is not automatically paused, the nodes will continue with spawning. So you have to take an additional step and invalidate/restart timer by your self. When using SKAction, this is done automatically. There are some other flaws of using NSTimer in SpriteKit, search SO about all that, there are some posts which covering all this.
import SpriteKit
class GameScene: SKScene{
var radius:UInt32 = 0
override func didMoveToView(view: SKView) {
startSpawning()
}
func startSpawning(){
let wait = SKAction.waitForDuration(0.5)
// let wait = SKAction.waitForDuration(1, withRange: 0.4) // randomize wait duration
let addNode = SKAction.runBlock({
[unowned self] in //http://stackoverflow.com/a/24320474/3402095 - read about strong reference cycles here
if(self.radius >= 30){
if self.actionForKey("spawning") != nil {
self.removeActionForKey("spawning")
}
}
self.radius++
let sprite = self.spawnNode()
sprite.position = CGPoint(x: Int(arc4random()) % 300, y: Int(arc4random()) % 300) // change this to randomize sprite's position to suit your needs
self.addChild(sprite)
})
//wait & add node
let sequence = SKAction.sequence([wait, addNode])
//repeat forever
runAction(SKAction.repeatActionForever(sequence), withKey: "spawning")
}
func spawnNode()->SKSpriteNode{
let sprite = SKSpriteNode(color: SKColor.purpleColor(), size: CGSize(width: 50, height: 50))
//Do sprite initialization here
return sprite
}
}
The sleep stops the whole app because you are running the loop on the main thread.
You can solve this problem in one of two ways...
1) Use an NSTimer. Set it to the amount of time you want to delay. Put the body of the loop in the timer's trigger function and disable the timer when it has been called enough times. This is the best solution.
2) Wrap the loop in a dispatch async block to a background thread and put a sleep in the loop. If you do this though, you will have to wrap the UI code in another dispatch async block that comes back to the main thread.
I have several buttons (SKSpriteNodes) which I am trying to cycle through and animate, with a small delay between each. My code compiles, but when I run it - I only get a white screen and a crash with this error: "Message from debugger: Terminated due to memory issue". Here is my code:
var sequence = SKAction.sequence([animationUp, animationDown])
runAction(SKAction.repeatActionForever(SKAction.sequence([
SKAction.runBlock({
button1.runAction(sequence)
SKAction.waitForDuration(0.5)
button2.runAction(sequence)
SKAction.waitForDuration(0.5)
button3.runAction(sequence)
SKAction.waitForDuration(0.5)
}),
])))
So what I am trying to accomplish is an up/down animation on every button I'm drawing to the screen, with a 0.5 second delay between each button. The animation should run forever until I change the current screen. I had no problem animating these buttons simultaneously but I'd really like to add a uniform delay so that they don't all animate at the same time. Any ideas?
let waitAction = SKAction.waitForDuration(0.5)
let movementAction = SKAction.sequence([animateUp, animateDown])
let button1Block = SKAction.runBlock({
button1.runAction(movementAction)
})
let button2Block = SKAction.runBlock({
button2.runAction(movementAction)
})
let button3Block = SKAction.runBlock({
button3.runAction(movementAction)
})
let sequence = SKAction.sequence([button1Block,waitAction,button2Block, waitAction, button3Block, waitAction])
runAction(SKAction.repeatActionForever(sequence))
I'm not certain about how the SKAction.sequence initiates/destroys, but possibly your loop in .repeatActionForever(..) creates and destroys objects, whereas memory won't be released until the loop is allowed to complete.
Try to run your inner runAction block within an autoreleasepool { .. } block:
autoreleasepool {
runAction ...
}
But there is one situation we do need to autorelease, that is we
create a lot of objects in a method scope and want to release them
sooner. It is extremely useful when these objects turn to a pressure
on memory.
http://en.swifter.tips/autoreleasepool/