Using MySQL Workbensh 6.3.7 on Windows 10, I am finding the search behavior strange.
There is an entry box that you could use to enter the name of the table, however, this does not work every time! I mean it sometimes finds the table and sometimes it does not! When it works, it is very good. I can enter 1 or more chars from start and the tool would highlight the table in the diagram, for some tables, even entering the full name, it does not find the table!
If I go to a specific table from the tree on the left-hand-side nav, and double click the table, it opens its properties, but it does not select it on the drawing area!
I have generated the DDL and searched it as text to find columns and relations then traced that back manually but this is difficult for large diagrams.
I want to be able to search for a table (even with wild card) and find it in the drawing surface - Also, what does the dot at the right side of the table name in the schema treeview mean?
The search behavior sounds like a bug to me. It should always select the table figures that match. When you file a bug report for that (http://bugs.mysql.com) it can be fixed.
The dot in the catalog treeview is just an indicator which db object has been placed already on the current diagram.
A tip: use layers to organize bigger diagrams. Use colors for different groups of db objects, like this:
You can change the colors on the Properties tab in the lower left corner, even for multiple figures in one step.
And don't forget you can increase the size of the diagram to fit more figures on it. See the menu Model -> Diagram Properties and Size....
Related
I have 2 tables in my visualization. One is a list of tasks to be done, and one is a list of repairs that have been done at each location. I want to be able to filter the repairs table by the locations of the highlighted tasks. Ergo if you marked a task that takes place at location 1, the second table would filter to only show repairs for location 1. Is that something that's doable?
Thanks in advance
This is pretty easy to do. You need to create a relation on the Location column between your two tables (Data table properties, Relations tab). Then create a details visualization (right click on "parent" table and select details visualization). Because you have created the relation already, it will ask you which table you want to be the "child". After selecting which table, you will be able to click on the parent, and it will filter in the child table. Also note, using the right click menu is engaging the data limiting with marking, which you will be able to see in the properties dialog, data menu. You don't have to use the right click menu to setup details visualizations. It's just easy.
I've written a lot about how to use relations and column matches. See links below. Relations integrate filtering, which is what you want. Column matches integrate marking.
https://www.bigmountainanalytics.com/apply-relations-and-column-matches-in-spotfire/
https://www.bigmountainanalytics.com/how-to-use-relations-in-spotfire/
https://www.bigmountainanalytics.com/how-to-use-column-matches-in-spotfire/
In a TinyMce textarea, I have a content where several tables directly follow each other (there's no content between the tables themselves). Using TinyMce, I want to allow my users to insert a new paragraph between those tables... but that doesn't seem possible?... (Not sure whether I'm missing something or if it's an oversight.)
If I try to click between the tables (even if they have a CSS margin applied), the cursor goes immediately inside the closest cell of one of the tables. Same thing if I move the cursor with the keyboard arrow keys: it jumps from table 1 to table 2 without stopping between them. So there's no way to add a new element between those tables.
I sometimes work with ckEditor on Drupal projects, and it has a sort of red horizontal line that appears on hover, when you move your mouse between block-level elements. Clicking on this red line allows to insert a new paragraph between those blocks. Is there some equivalent for TinyMCE? (Or another solution?)
Use your mouse to target the end of the table and then hit enter. In this fiddle I created http://fiddle.tinymce.com/Vygaab/1 I add one table, add a second table, then use my mouse target the end of the first table.
Note that neither table should be selected, and when you target the end of the first table, it shouldn't show as selected.
Then if you hit enter, you should get a new paragraph. In this fast example, I took the borders off the table so you can see the cursor blinking more easily.
This was built with the latest Cloud Stable version.
I am creating an org chart from an excel spreadsheet. Each row has Employee Name and Job Title, but also Employee ID and Supervisor Employee ID (both number data types).
I am using the Organization Chart Wizard to automatically create an org chart as a starting point (its pretty big). In doing so, I use the two numeric fields in the "name" and "reports to" fields because we have employees with the same name. However, I do not want these numerical fields displayed in the org chart shapes. You can see in the second picture I cannot remove the three default fields from the chosen "Shape Data Fields."
Here's what the shapes look like, I want to remove the number field altogether. Regardless of the shape stencil I select, I get the same behavior.
If I try to delete the shape, I get the error "shape protection, container and/or layer properties prevent complete execution." Even when I go to Developer -> Protection -> Unlock, the issue persists. Thus, it must be an issue with the container or layer properties.
Lastly, this page has a "To Delete a data field" section at the bottom. I tried exactly this, and the fields were removed from the Define Shape Data box, but the shapes remained unchanged, still showing all fields:
https://support.office.com/en-us/article/Add-data-to-shapes-09272394-5243-4e1b-bcfa-425a8b4d1ce2?ui=en-US&rs=en-US&ad=US
Tweak the master you want to use by decorticating its structure.
In the drawing explorer check whether the shape (the master) is group or a single shape. Find out where the ID (the 3rd field) is used for display, adjust accordingly by correcting the shapesheet.
Sorry for such a generic explanation. If we could exchange files, I would have had a look at your master and could have corrected it.
HTH, Y.
I had the same issue, and eventually found that I could prevent the ID field (used in Name) from displaying, using Display Options - on the Org Chart tab, using the dialog box launcher button (bottom-right) in the Shapes section.
The ID field is shown as 'Name' under Block 2 - you can use the drop-down to set this to 'None' (so that it doesn't display at all), or pick one of the other fields that you chose to display in its place.
I'm operating in Word 2013 and 2010, so I can use code that works in either. I'm trying to create a word document to keep track of my recipes. At its most basic I want to have a TOC that updates based on headings. I also want it to have any category I want (eg: Appetizers, Drinks, Entrée, etc...) ordered alphabetically. Under each category I have tables. Each recipe gets a table that has it's name, directions, notes, tags, and potentially a picture. The second cell has another two column table inside of it that contains the quantity and name of each ingredient necessary for the recipe.
I have all of that so far and I'd like to automate adding new categories and recipes. Currently, I have to find the category, then scroll down to find where the name goes alphabetically and insert a quick table I made. I then fill in the info.
I'd like to be able to search the document for each category name, then insert the new category wherever it belongs, with a space before and after it. I found that my tables give me trouble if I don't have a space between everything. It tries to pull anything it's touching into the table and merge them.
I wanted to give the backstory, so you'd know where I was going to go eventually and could provide help that fits better with what I need. After I can add a new category, I plan to use vba to organize each table alphabetically by the name in the first cell of each table. It will also help when I start adding sorts to it. Eventually, I'd like to be able to sort it to say, only display recipes from a certain person, or display my frequently used recipes. I'd then have it either hide all the others or create a new doc with just these. So thanks for the help. Below I'll post the code I most recently tried. I tried a few other variations of this same code and keep getting an 'expected end of statement. I've gotten other errors when trying other variations of it, but this is the best I can come up with on my own.
Private Sub UserForm_Initialize()
For Each cat In ActiveDocument.Styles = "Heading 1"
lstCat.AddItem (cat)
Next
End Sub
I have a form called frmAddCategory I'm using as a test. I was going to have a listbox lstCat to show every category with the style heading 1. I have a textbox called txtAdd to type new ones and a cmdAdd button to add it to the form.
Edit: I've been playing around with my macro recorder after finding out about outline view mode. I set it to show only 'heading 1' level and selected the ones I wanted, not selecting the appendix or reference. Then I went to the home tab and sorted paragraph by ascending alphabetical order. I got some code I believe I can use to get it to run in VBA. However, it's not a complete fix as I don't want to select the last two with heading 1. It also works if I manually select the tables under each heading 1, but I can't set the spacing before and after. I'd like each heading and the tables under them to have a space or two between each for looks and editing purposes.
Also, if someone is going to give my question a negative rating, then please post a comment explaining. As far as I can tell from the faq about the forum and the other questions I've seen, it is a well posed question. A clear title, a good explanation of the problem, code examples, research. So if I am doing something wrong, please inform me, so that I can correct it.
first thanks for your bit about macro recorder and outline mode, I have been trying for long time to fill a list box with selection.text between two HeadingLevel(1) headings.
now to yours, sorry I can't think of way to do in word. BUT it would be real easy in Access. one table of categories like called tblCategories another for recipes tblRecipes. To make real easy, when the use autoID on ALL tables. But to avoid LOTS of headaches for tblRecipes rename its autoID to RecipesID same for other tables. in table of recipes you can use a memo field to hold large amount of data. the spot for text in Heading would be put in one field of the tblRecipes. once you have tables looking to have a field for each item you want to track. hit save, then use wizard to create a form based on table. repeat for all tables you want to have it real easy to put info into any table.
1.reportTOC based on query of Every Heading you want, can preview or print as want. reportByCategory and so on reports are sorted a to z unless you want to sort by Owner, then recipe all auto sorted a - z.
report wizard to get hard copy. if you want to sort real easy, built in. also if want to be able to pick all recipes for a holiday real easy, one table tblHolidays. one tblHolidayRecipes fields autoId (not used by you anywhere but needed), fldRecipesId (holds RecipesId) , fldHolidayId (holds HolidayId). the wizard will show how to get only what you want. in access 2013 you can include pix of food or.
I have a 2-column SWT Table that uses TableViewer. Trouble is that I can only select (and edit) cells in the first column -- clicking on the second column does nothing.
I read from somewhere (lost the link) that there's no easy way to get such functionality (!) -- you're supposed to mess around with several extra concepts if you want to select (and edit) different columns in your table.
This snippet
(http://www.goneeded.com/snippet/eclipse/JFace/Viewers/Snippet035TableCursorCellHighlighter.html)
seems to be relevant, but it's not clear which part of it is necessary and it has depenendencies to other snippets. I tried to get it working but it did nothing.
Seems that new table editing and cell-selecting features were added in Eclipse 3.3 -- is there a tutorial or smth available on how to use them? The snippets are too cryptic for me.
You should be able to edit and select cells independently. You might have the SWT.FULL_SELECTION style bit set on the Table constructor. That forces every selection to span the whole row instead of a single cell.
I'd check out this tutorial for more on TableViewers:
http://www.eclipse.org/articles/Article-Table-viewer/table_viewer.html