I have a 3D matrix C=51x51x11 dimensions, obtained from a function in a separate script, the x,y,z represent length, depth and height, and the value represent a concentration per x,y,z point. I want to create a slice crossing x and another crossing y showing the difference in concentration by color. I have tried using ngrid and meshgrid but didn't work. may i have some help with this please?
Use slice()
C = randi(1,[51,51,11]);
x= 25; y = 25; z = 5;
sl = slice(C,x,y,z);
Using slice inside a function to make it easy to view in 3d:
function eslice(V,sx,sy,sz)
slice(V,sx,sy,sz)
shading interp
axis equal
axis vis3d
end
This is from my personal library, enjoy.
Related
I have a set of n=8000 cartesian coordinates X,Y and Z as vectors and also a vector V of same size which I want to use as values to create a heatmap on a sphere.
I saw this link (visualization of scattered data over a sphere surface MATLAB), but I don't understand how I convert this set of data into a meshgrid for plotting using surf.
Almost every example I saw uses meshgrids.
Right now, I am doing by plotting a sphere and then use scatter3 to plot my points as big balls and try to smooth them later. I looks like this:
I would like to get the figure as the plotting of the example in that link, where he uses:
k = 5;
n = 2^k-1;
[x,y,z] = sphere(n);
c = hadamard(2^k);
surf(x,y,z,c);
colormap([1 1 0; 0 1 1])
axis equal
EDIT:
(Sorry for taking so long to reply, the corona crises kept away from work)
What I am actually doing is:
for i=1:numel(pop0n)
ori(i,:)=ori(i,:)/norm(ori(i,:));
end
x = ori(:,1);
y = ori(:,2);
z = ori(:,3);
%// plot
m=100;
[aa,bb,cc] = sphere(m);
surf(aa,bb,cc,ones(m+1,m+1)*min(pop0n))
hold on
colormap jet;
scatter3(x,y,z,400,pop0n/norm(pop0n),'filled');
colorbar
shading interp
The array 'ori' is 8000x3, and contains the x, y and z coordinates of the points I want to plot and pop0n is a 8000 sized vector with the intensities of each coordinate.
My main question is how do I transform my x, y, z and pop0n, that are vectors, into 2D arrays (meshgrid) to use surf?
Because I cannot simply do surf(x,y,z,pop0n) if they are vectors.
Thanks in advance
As David suggested, griddata does the job.
What I did was:
for i=1:numel(pop0n)
ori(i,:)=ori(i,:)/norm(ori(i,:));
end
x = ori(:,1);
y = ori(:,2);
z = ori(:,3);
%// plot
m=100;
[aa,bb,cc] = sphere(m);
v = griddata(x,y,z,pop0n,aa,bb,cc,'nearest');
surf(aa,bb,cc,v)
colormap jet;
colorbar
shading interp
I have started to learn Machine Learning, and programming in matlab.
I want to plot a matrix sized m*d where d=3 and m are the number of points.
with y binary vector I'd like to color each point with blue/red.
and plot a plane which is described with the vertical vector to it w.
The problem I trying to solve is to give some kind of visual representation of the data and the linear predictor.
All I know is how to single points with plot3, but no any number of points.
Thanks.
Plot the points using scatter3()
scatter3(X(y,1),X(y,2),X(y,3),'filled','fillcolor','red');
hold on;
scatter3(X(~y,1),X(~y,2),X(~y,3),'filled','fillcolor','blue');
or using plot3()
plot(X(y,1),X(y,2),X(y,3),' o','MarkerEdgeColor','red','MarkerFaceColor','red');
hold on;
plot(X(~y,1),X(~y,2),X(~y,3),' o','MarkerEdgeColor','blue','MarkerFaceColor','blue');
There are a few ways to plot a plane. As long as w(3) isn't very close to 0 then the following will work okay. I'm assuming your plane is defined by x'*w+b=0 where b is a scalar and w and x are column vectors.
x1min = min(X(:,1)); x2min = min(X(:,2));
x1max = max(X(:,1)); x2max = max(X(:,2));
[x1,x2] = meshgrid(linspace(x1min,x1max,20), linspace(x2min, x2max, 20));
x3 = -(w(1)*x1 + w(2)*x2 + b)/w(3);
surf(x1,x2,x3,'FaceColor',[0.6,0.6,0.6],'FaceAlpha',0.7,'EdgeColor',[0.4,0.4,0.4],'EdgeAlpha',0.4);
xlabel('x_1'); ylabel('x_2'); zlabel('x_3'); axis('vis3d');
Resulting plot
I have the following equations:
FindBurrow = .3*log(x+2)-.2
DistEffect= normpdf(y,0,6) + 0.92
VegEffect = -.006*z+1
Detection = FindBurrow*DistEffect*VegEffect
I would like to visualize the Detection function as part of a 4-D visualization. The fourth dimension would be color to represent Detection. I see that it is possible to do this if I have matrices with real x,y,z values but I currently don't.
I have tried to convert my symbolic x,y,z values to real 100 by 100 matrices using the following but it doesn't seem to work properly.
%% Conversion to "Real" Numbers
syms f(x,y,z)
f(x,y,z) = Detection;
[x,y] = ndgrid(linspace(1/10,50), linspace(1/10, 50))
z] = ndgrid(linspace(1/10,50), linspace(1/10, 50))
g = matlabFunction(Detection);
DetKernel = real(g(x,y,z))
%% Graphing the IPM
figure
surf(x,y,z,DetKernel) % surface map
clear title xlabel ylabel %Clears old runs index
xlabel ('Burrow Size') %x-axis label
ylabel('Distance From Line') %y-axis label
zlabel('Vegetation Effect') %z-axis label
cb = colorbar;
cb.Label.String = 'Probability of Detection';
I suspect this is due to a lack of knowledge of how to define the x,y,z values to make them act like grid points that Matlab will then use to make a surface or mesh. The graphing part seems to work okay, just doesn't make the shape I would expect based on experimental plotting of the XY, YZ, Z*X equations.
In short I have two questions: 1. Can I graph 4D using symbolic variables? 2. If not, how do I convert to real numbers without messing up my data?
For reference, x will be between 0 and 55, y will be between 0 and 25 and z will be between 0 and 160.
MATLAB's surf command allows you to pass it optional X and Y data that specify non-cartesian x-y components. (they essentially change the basis vectors). I desire to pass similar arguments to a function that will draw a line.
How do I plot a line using a non-cartesian coordinate system?
My apologies if my terminology is a little off. This still might technically be a cartesian space but it wouldn't be square in the sense that one unit in the x-direction is orthogonal to one unit in the y-direction. If you can correct my terminology, I would really appreciate it!
EDIT:
Below better demonstrates what I mean:
The commands:
datA=1:10;
datB=1:10;
X=cosd(8*datA)'*datB;
Y=datA'*log10(datB*3);
Z=ones(size(datA'))*cosd(datB);
XX=X./(1+Z);
YY=Y./(1+Z);
surf(XX,YY,eye(10)); view([0 0 1])
produces the following graph:
Here, the X and Y dimensions are not orthogonal nor equi-spaced. One unit in x could correspond to 5 cm in the x direction but the next one unit in x could correspond to 2 cm in the x direction + 1 cm in the y direction. I desire to replicate this functionality but drawing a line instead of a surf For instance, I'm looking for a function where:
straightLine=[(1:10)' (1:10)'];
my_line(XX,YY,straightLine(:,1),straightLine(:,2))
would produce a line that traced the red squares on the surf graph.
I'm still not certain of what your input data are about, and what you want to plot. However, from how you want to plot it, I can help.
When you call
surf(XX,YY,eye(10)); view([0 0 1]);
and want to get only the "red parts", i.e. the maxima of the function, you are essentially selecting a subset of the XX, YY matrices using the diagonal matrix as indicator. So you could select those points manually, and use plot to plot them as a line:
Xplot = diag(XX);
Yplot = diag(YY);
plot(Xplot,Yplot,'r.-');
The call to diag(XX) will take the diagonal elements of the matrix XX, which is exactly where you'll get the red patches when you use surf with the z data according to eye().
Result:
Also, if you're just trying to do what your example states, then there's no need to use matrices just to take out the diagonal eventually. Here's the same result, using elementwise operations on your input vectors:
datA = 1:10;
datB = 1:10;
X2 = cosd(8*datA).*datB;
Y2 = datA.*log10(datB*3);
Z2 = cosd(datB);
XX2 = X2./(1+Z2);
YY2 = Y2./(1+Z2);
plot(Xplot,Yplot,'rs-',XX2,YY2,'bo--','linewidth',2,'markersize',10);
legend('original','vector')
Result:
Matlab has many built-in function to assist you.
In 2D the easiest way to do this is polar that allows you to make a graph using theta and rho vectors:
theta = linspace(0,2*pi,100);
r = sin(2*theta);
figure(1)
polar(theta, r), grid on
So, you would get this.
There also is pol2cart function that would convert your data into x and y format:
[x,y] = pol2cart(theta,r);
figure(2)
plot(x, y), grid on
This would look slightly different
Then, if we extend this to 3D, you are only left with plot3. So, If you have data like:
theta = linspace(0,10*pi,500);
r = ones(size(theta));
z = linspace(-10,10,500);
you need to use pol2cart with 3 arguments to produce this:
[x,y,z] = pol2cart(theta,r,z);
figure(3)
plot3(x,y,z),grid on
Finally, if you have spherical data, you have sph2cart:
theta = linspace(0,2*pi,100);
phi = linspace(-pi/2,pi/2,100);
rho = sin(2*theta - phi);
[x,y,z] = sph2cart(theta, phi, rho);
figure(4)
plot3(x,y,z),grid on
view([-150 70])
That would look this way
I'm trying to make a color plot in matlab using output data from another program. What I have are 3 vectors indicating the x-position, y-yposition (both in milliarcseconds, since this represents an image of the surroundings of a black hole), and value (which will be assigned a color) of every point in the desired image. I apparently can't use pcolor, because the values which indicate the color of each "pixel" are not in a matrix, and I don't know a way other than meshgrid to create a matrix out of the vectors, which didn't work due to the size of the vectors.
Thanks in advance for any help, I may not be able to reply immediately.
If we make no assumptions about the arrangement of the x,y coordinates (i.e. non-monotonic) and the sparsity of the data samples, the best way to get a nice image out of your vectors is to use TriScatteredInterp. Here is an example:
% samplesToGrid.m
function [vi,xi,yi] = samplesToGrid(x,y,v)
F = TriScatteredInterp(x,y,v);
[yi,xi] = ndgrid(min(y(:)):max(y(:)), min(x(:)):max(x(:)));
vi = F(xi,yi);
Here's an example of taking 500 "pixel" samples on a 100x100 grid and building a full image:
% exampleSparsePeakSamples.m
x = randi(100,[500 1]); y = randi(100,[500 1]);
v = exp(-(x-50).^2/50) .* exp(-(y-50).^2/50) + 1e-2*randn(size(x));
vi = samplesToGrid(x,y,v);
imagesc(vi); axis image
Gordon's answer will work if the coordinates are integer-valued, but the image will be spare.
You can assign your values to a matrix based on the x and y coordinates and then use imagesc (or a similar function).
% Assuming the X and Y coords start at 1
max_x = max(Xcoords);
max_y = max(Ycoords);
data = nan(max_y, max_x); % Note the order of y and x
indexes = sub2ind(size(data), max_y, max_x);
data(indexes) = Values;
imagesc(data); % note that NaN values will be colored with the minimum colormap value