I am trying to install pg-trajectory on windows through mingw command window and while entering this line
$ mingw32-make PG_CONFIG=E:\PostgreSQL\9.5\bin\pg_config.exe
I am encountering this error:
Process_begin: CreateProcess(NULL, E:PostgresSQL9.5binpg_config.exe –pgxs, …) failed
Mingw32-make: *** No targets. Stop.
Is there is an alternative or solution to this? Kindly inform me
Download library from source: https://bitbucket.org/gsudmlab/pg-trajectory
Execute pg_trajectory--0.0.1.sql file.
To execute, you can copy it and paste to psql or use command \q pg_trajectory--0.0.1.sql
Make sure you installed pre-requisite (PostGIS).
Alternatively, install.sh script should work as well.
Related
I'm trying (for hours now) to install the cargo crate diesel_cli for postgres. However, every time I run the recommended cargo command:
cargo install diesel_cli --no-default-features --features postgres
I wait a few minutes just to see the same build fail with this message:
note: LINK : fatal error LNK1181: cannot open input file 'libpq.lib'
error: aborting due to previous error
error: failed to compile `diesel_cli v1.4.1`, intermediate artifacts can be found at `C:\Users\<user name here>\AppData\Local\Temp\cargo-installUU2DtT`
Caused by:
could not compile `diesel_cli`.
I'm running postgres in a docker container and have the binaries on my C:\pgsql with the lib and bin directories both on the PATH so I can't figure out why it's not linking. What else could be required they didn't mention in the docs?
In my case the installation was successful but when I tried to run it this error occured.
maybe this would work for others who have the same problem:
open PowerShell
type in setx PQ_LIB_DIR "C:\Program Files\PostgreSQL\13\lib" (or any other path to your PostgreSQL lib)
restart your PC
run again
I had the same issue with WSL, if you're on Linux probably you could find PostgreSQL lib location and add it to your environment variables.
Update:
The answer below is a work around for older versions. Please check the possibility to execute cargo clean first
Original Version
Adding the folder to the PATH variable didn't help, at least in my case, as by some reason it is not used in the /LIBPATH parameter passed to link.exe.
In my case it was C:\Users\<username>\.rustup\toolchains\stable-x86_64-pc-windows-msvc\lib\rustlib\x86_64-pc-windows-msvc\lib
You can see it in the beginning of the error message.
Copy libpq.lib in there and it will be used from there.
After installation diesel would require some other assemblies. Copy libcrypto-1_1-x64.dll, libiconv-2.dll and libssl-1_1-x64.dll into the folder showed after where diesel command execution
I had the same error on Ubuntu and for me the following install fixed the issue:
sudo apt install libpq-dev
No need to move files around, just add C:\Program Files\PostgreSQL\14\lib and C:\Program Files\PostgreSQL\14\bin to your PATH. Installing and running diesel should have no problems.
Note: your paths may be different, and remember to close/reopen your terminal so the PATH variable is updated.
(Tested on Windows 10)
To give clear steps for windows:
Add C:\Users<username>.rustup\toolchains\stable-x86_64-pc-windows-msvc\lib\rustlib\x86_64-pc-windows-msvc\lib in the path in environment variables
Copy libpq.lib that is in C:\Program Files\PostgreSQL\14\lib (obviously this is with version 14) and paste it in C:\Users<username>.rustup\toolchains\stable-x86_64-pc-windows-msvc\lib\rustlib\x86_64-pc-windows-msvc\lib
If you've attempted to cargo build (or anything that runs the build scripts for libpq rust crate) when your environment was invalid, then you need to do a cargo clean after fixing your environment otherwise you'll still get the libpq.lib not found error even when it's in your PATH. The other answers where you copy the file into another directory are just hacks
You can instead add the path to .../lib to the compilers' library search paths, using RUSTFLAGS environment variable. It works both for installing diesel_cli and for building your projects.
RUSTFLAGS='-L /usr/local/pgsql/lib' cargo build
On Windows with EDB installer, the path contains a space, so use CARGO_ENCODED_RUSTFLAGS instead. For PowerShell:
$env:CARGO_ENCODED_RUSTFLAGS = "-L`u{1f}C:\Program Files\PostgreSQL\14\lib"
I want to install labelImg for mac OS in python 3.7. here is the repo: https://github.com/tzutalin/labelImg
I have installed previous modules via 'pip3 install pyqt5 lxml' successfully. Cloned the repo, entered the folder 'labelImg', but only 'make qt5py3' does not work..
but when I execute 'make qt5py3', i get the error
pyrcc5 -o libs/resources.py resources.qrc
make: pyrcc5: No such file or directory
make: *** [qt5py3] Error 1
What can I do here? What might have caused the issue?
-find 'pyrcc5' under python bin, and copy 'path'
-under labelImg find 'Makefile' and edit
-change line
qt5py3: pyrcc5 to qt5py3: 'copied path'/pyrcc5
and save
-and
make qt5py3
python labelImg.py
should works.
I had the same issues as the OP, but with Python 3.6.11. In addition, I got ModuleNotFoundErrors for pyqt5 and libxml2, even though brew confirmed they were both installed. Also, I was trying to install in a virtual environment set up using pyenv.
What finally worked for me was:
1) use global env, not virtual
2) use pip (not pip3) to install pyqt5 and lxml
3) change the makefile as #zippo suggested
After I did that, I was able to get labelImg to start by running:
python labelImg.py
I'm trying to run a configure script that I created using automake. It succeeds on OSs like Ubuntu, Redhat, and even AIX. But it fails to run on Solaris producing this error snippet.
configure: creating ./config.status
./configure[14670]: .[1]: _ACEOF: cannot execute [Not a directory]
configure: error: could not make ./config.status
Does anyone have ideas on why this error might be occurring on Solaris? Am I missing a dependency or a configure check that I need to account for with Solaris?
I'm trying to use Eclipse for Parallel Application Developers to do some MPI stuff but I can't get the program to compile. Below is the error I'm getting in the console:
Description Resource Path Location Type
/bin/sh: mpic++: command not found prog C/C++ Problem
I use mpic++ from the command line (bash shell) to successfully compile programs. When I run the command using bourne shell I get an error.
/bin/sh mpic++
/usr/local/bin/mpic++: /usr/local/bin/mpic++: cannot execute binary file
When I use sudo I still get the same error. But when I first change to the bourne shell then run the mpic++ command it works.
/bin/sh
sh-3.2$ mpic++
clang: error: no input files
I've been looking at ways to change the shell used by eclipse so I can use the bash shell because I can call mpic++ without any problems. I've also tried launching eclipse with sudo but that didn't work.
I have compiled mpi in eclipse successfully. Please follow the steps:
In terminal type:
$ which mpicxx
/usr/local/bin/mpicxx
You should get the mpicxx binary path as result. I have my mpicxx in /usr/local/bin/ directory.
In eclipse, go to project properties:
Set GCC C Compiler as: /usr/local/bin/mpicxx
Also set GCC C+ Compiler as: /usr/local/bin/mpicxx
Set MacOS X C++ Linker as: /usr/local/bin/mpicxx. Also set All options as -L/usr/local/lib
I am trying to install sipp with pcap-replay on winows7.
I have installed cygwnin, libncurse, and winpcap. I was trying to patch cygwin with IPv6 using the URL http://cygwin.win6.jp/cygwin-ipv6/, but it couldn't get the setup.ini file.
So I copied to local directory and upgrade, but it said no new updates.
And if I try to complie sipp. it gives error
$ ./configure.ac --with-pcap
./configure.ac: line 3: syntax error near unexpected token [SIPp],'
./configure.ac: line 3:AC_INIT([SIPp], [3.3], [sipp-users#lists.sourceforge.net], [sipp])'
Could anyone help me in getting sipp be installed on windows?
I download sipp.3.3.990 it has ./configure and was able to install on Linux.
But now on windows it still fails saying ncurse is not present. But I have downloaded it.
How do I troubleshoot it from here?
You can follow below steps to generate configure from configure.ac.
$> autoreconf -i
Now, you will see a configure file created at the same location.
To run the above command, following packages are required: automake,ncurses-devel,libncurses,M4 and autoconf.
if any of the above packages are missing run the cygwin setup file again and select the packages on the package selection screen and click install.