I want to install labelImg for mac OS in python 3.7. here is the repo: https://github.com/tzutalin/labelImg
I have installed previous modules via 'pip3 install pyqt5 lxml' successfully. Cloned the repo, entered the folder 'labelImg', but only 'make qt5py3' does not work..
but when I execute 'make qt5py3', i get the error
pyrcc5 -o libs/resources.py resources.qrc
make: pyrcc5: No such file or directory
make: *** [qt5py3] Error 1
What can I do here? What might have caused the issue?
-find 'pyrcc5' under python bin, and copy 'path'
-under labelImg find 'Makefile' and edit
-change line
qt5py3: pyrcc5 to qt5py3: 'copied path'/pyrcc5
and save
-and
make qt5py3
python labelImg.py
should works.
I had the same issues as the OP, but with Python 3.6.11. In addition, I got ModuleNotFoundErrors for pyqt5 and libxml2, even though brew confirmed they were both installed. Also, I was trying to install in a virtual environment set up using pyenv.
What finally worked for me was:
1) use global env, not virtual
2) use pip (not pip3) to install pyqt5 and lxml
3) change the makefile as #zippo suggested
After I did that, I was able to get labelImg to start by running:
python labelImg.py
Related
anybody can help me figure out why the installation is hanging on 'Generating installed device list' and how to solve it without starting the process all over. I am working on CentOs.
Thanks in advance
I think this happens due to following missing packages:
libstdc++6:i386
libgtk2.0-0:i386
dpkg-dev:i386
ncurses5-compat-libs
python3-pip
libtinfo5
libncurses5
As BKN mentioned, you need to install the missing packages.
To avoid starting all over again, you can do the following:
Check the log: cat ~/.Xilinx/xinstall/*.log
Locate the error message. It should look something like:
2022-01-09 10:53:11,458 DEBUG: n.t:? - Executing script Generating installed device list: /tools/Xilinx/Vivado/2021.2/bin/vivado [-nolog, -nojournal, -mode, batch, -source, /tools/Xilinx/Vivado/2021.2/scripts/sysgen/tcl/xlpartinfo.tcl, -tclargs, /tools/Xilinx/Vivado/2021.2/data/parts/installed_devices.txt]
2022-01-09 12:05:35,319 DEBUG: n.t:? - Unable to run GenerateDevListFileLin, exit code: 130, stdout: , stderr: application-specific initialization failed: couldn't load file "librdi_commontasks.so": libtinfo.so.5: cannot open shared object file: No such file or directory failure msg:
application-specific initialization failed: couldn't load file "librdi_commontasks.so": libtinfo.so.5: cannot open shared object file: No such file or directory
2022-01-09 12:05:35,319 DEBUG: n.t:? - Executing script Generating installed device list for Model Composer: /tools/Xilinx/Vivado/2021.2/bin/vivado [-nolog, -nojournal, -mode, batch, -source, /tools/Xilinx/Model_Composer/2021.2/data/xmcGenBoardParts.tcl, -tclargs, /tools/Xilinx/Model_Composer/2021.2/../../Vivado/2021.2, librdi_dsp_tcltasks.so, /tools/Xilinx/Model_Composer/2021.2/data]
The log informs you exactly what the missing package is (in this case it was libtinfo), and also provides you with the script to run after you install the package:
/tools/Xilinx/Vivado/2021.2/bin/vivado -nolog -nojournal -mode batch -source /tools/Xilinx/Vivado/2021.2/scripts/sysgen/tcl/xlpartinfo.tcl -tclargs /tools/Xilinx/Vivado/2021.2/data/parts/installed_devices.txt
Notes:
Make sure to use the Vivado version (here it was 2021.2) and location (here it was /tools/Xilinx) according to your system.
You may need to run the script in sudo if the the permissions for writing are not available in user mode.
I also encounterd this problem on Archlinux with Vivado 2018.3.
But I just installed the library ncurses5-compat-libs, then the problem is solved.
Perhaps you can solve this by checking the library ncurses5-compat-libs.
Download the tar package instead of the self-extracting bin package
Update the java and python version
sudo apt-get install -y python3-pip
Install Dependencies
sudo apt-get install -y libstdc++6
sudo apt-get install -y libgtk2.0-0
sudo apt-get install -y dpkg-dev
NOTE: Without ibtinfo5 the application will not start and without libncurses5 the simulation will fail
`sudo apt-get install -y libtinfo5 libncurses5`
Restart the system
Untar that Vivado package
tar -xzvf Xilinx_Unified_2021.2_1021_0703.tar.gz
Locate the xsetup file in the package
Install the package in batch mode
./xsetup --agree 3rdPartyEULA,XilinxEULA --batch Install --product "Vivado" --edition "Vivado ML Enterprise" --location "/home/USER"
Once the installation has been successfully completed
Locate the settings64.sh file
./settings64.sh
Locate the cable drivers
cd Vivado/2021.2/data/xicom/cable_drivers/lin64/install_scripts/install_drivers
./install_drivers
Installing Vivado Board Files
Get the board package from the git https://github.com/Digilent/vivado-boards.git
From the vivado-board-master package copy the folder board_files undert /vivado-board-master/new/board_files
Paste the board files to Vivado/2021.2/data/boards
From the vivado-board-master package copy the file Vivado_init.tcl under /vivado-board-master/utility
Paste the file Vivado_init.tcl to the Vivado installation
That's it!! You might not need to do all these steps but that is what I ended up doing and it worked for the two machines where I installed Vivado. The installation took less than one hour.
This was originally edited into the question itself by the OP.
I have a python file running perfectly in the IDE.
I want to run it on a different PC without any IDE.
I run the program from the command line: python program.py
Error message: File "program.py", line 8, in
from mpl_finance import candlestick_ohlc
ModuleNotFoundError: No module named 'mpl_finance'
When trying: pip install mpl_finance (or pip install mpl_toolkits)
I get the message: No matching distribution found for mpl_finance (or mpl_toolkits)
There also seems to be a problem with matplotlib backend.
Looking for a solution please.
After many failed paths, here's what worked:
matplotlib.finance is deprecated and it is now mpl_finance.
Create 2 files named mpl_finance.py and setup.py and get their contents from here.
Then from the command-line: python setup.py install
Fixing the backend (this can save you a few days):
If the backend of matplotlib was set in a file original PC (and not in the code). Then you need to do the same on the second PC.
Windows Path: C:\Program Files\Python36\Lib\site-packages\matplotlib\mpl-data\matplotlibrc
Change (probably line 38) to this: backend : Qt5Agg
I am trying to install sipp with pcap-replay on winows7.
I have installed cygwnin, libncurse, and winpcap. I was trying to patch cygwin with IPv6 using the URL http://cygwin.win6.jp/cygwin-ipv6/, but it couldn't get the setup.ini file.
So I copied to local directory and upgrade, but it said no new updates.
And if I try to complie sipp. it gives error
$ ./configure.ac --with-pcap
./configure.ac: line 3: syntax error near unexpected token [SIPp],'
./configure.ac: line 3:AC_INIT([SIPp], [3.3], [sipp-users#lists.sourceforge.net], [sipp])'
Could anyone help me in getting sipp be installed on windows?
I download sipp.3.3.990 it has ./configure and was able to install on Linux.
But now on windows it still fails saying ncurse is not present. But I have downloaded it.
How do I troubleshoot it from here?
You can follow below steps to generate configure from configure.ac.
$> autoreconf -i
Now, you will see a configure file created at the same location.
To run the above command, following packages are required: automake,ncurses-devel,libncurses,M4 and autoconf.
if any of the above packages are missing run the cygwin setup file again and select the packages on the package selection screen and click install.
I have a really strange issue with the behavior of pip in a virtualenv.
I have set
export PIP_REQUIRE_VIRTUALENV=true
export PIP_DOWNLOAD_CACHE=$HOME/.pip/cache
export VIRTUALENV_DISTRIBUTE=true
Now, when I'm in my virtualenv and want to install my dependencies:
pip install -r requirements/_base.txt
(for testing purposes, requirements/_base.txt only contains:)
Django==1.5
Anyway, when I try to install it, I only get:
Downloading/unpacking Django==1.5 (from -r requirements/_base.txt (line 1))
Running setup.py egg_info for package Django
warning: no previously-included files matching '__pycache__' found under directory '*'
warning: no previously-included files matching '*.py[co]' found under directory '*'
And after that, Django is not installed.
Here comes the strange part: When I install Django manually with
pip install Django==1.5
it's working perfectly (though the same two warnings appear):
Downloading/unpacking Django==1.5
Running setup.py egg_info for package Django
warning: no previously-included files matching '__pycache__' found under directory '*'
warning: no previously-included files matching '*.py[co]' found under directory '*'
Installing collected packages: Django
Running setup.py install for Django
changing mode of build/scripts-2.7/django-admin.py from 644 to 755
warning: no previously-included files matching '__pycache__' found under directory '*'
warning: no previously-included files matching '*.py[co]' found under directory '*'
changing mode of /usr/local/share/python/django-admin.py to 755
Successfully installed Django
Cleaning up...
I faced a similar problem and realized that removing the version requirement solved the problem. Don't know why though...
I figured out why this was happening to me, which may also solve the problem for others who see this page. For me, the problem was that I had a requirement that can not install automatically via pip. The pip freeze exported the package name and version but, for whatever reason, pip cannot install that package directly in a requirements install. I have to instead install it manually from a zip file.
The problem you might be experiencing, then, is that you have a requirement which cannot be installed by pip's requirements installer. Check your output log for red text, errors, that sort of thing.
I figured this out using this post:
pip fails to install packages from requirements.txt
XML::Parser fails to build on a quite fresh 64-bit Debian box. After issuing cpan XML::Parser, cpan fails with lots of errors about Expat.c and Expat.xs:
[...]
Expat.xs:2182: error: ‘CallbackVector’ has no member named ‘skip_until’
Expat.c: In function ‘XS_XML__Parser__Expat_Do_External_Parse’:
Expat.c:2904: error: ‘XML_Parser’ undeclared (first use in this function)
Expat.c:2904: error: expected ‘;’ before ‘parser’
Expat.xs:2194: error: ‘parser’ undeclared (first use in this function)
make[1]: *** [Expat.o] Error 1
make[1]: Leaving directory `/root/.cpan/build/XML-Parser-2.41-rpV6ok/Expat'
make: *** [subdirs] Error 2
TODDR/XML-Parser-2.41.tar.gz
/usr/bin/make -- NOT OK
Running make test
Can't test without successful make
Running make install
Make had returned bad status, install seems impossible
Message at the start of the output explains that expat-devel is needed for building.
Expat must be installed prior to building XML::Parser and I can't find
it in the standard library directories. Install 'expat-devel' package with your
OS package manager. See 'README'.
But expat-devel is not in Debian repository.
Is it possible to get over this without need to build/install expat from source?
The package you want to install is named libexpat1-dev. You could also just install libxml-parser-perl via apt-get. Or if you really want to install via CPAN try installing the Debian packages dependencies first via apt-get build-dep libxml-parser-perl.
libexpat1-dev contains both libexpat and expat.h, which are both mentioned in the message as well:
If expat is installed, but in a non-standard directory, then use the
following options to Makefile.PL:
EXPATLIBPATH=... To set the directory in which to find libexpat
EXPATINCPATH=... To set the directory in which to find expat.h
Installing libexpat1-dev seems to solve the problem:
$ aptitude install libexpat1-dev
There is always the manual method - to build/install expat from source.
(This example shows installing to an alternative location for XAMPP | LAMPP)
Download from:
http://sourceforge.net/projects/expat/files/expat/
tar zxf /[where-ever]/expat-2.1.0.tar.gz -C /tmp
cd /tmp/expat-2.1.0
/opt/lampp/bin/perl ./configure --prefix=/opt/lampp LDFLAGS=-L/opt/lampp/lib
make
make install
http://search.cpan.org - search for and download - XML::Parser
tar zxf /[where-ever]/XML-Parser-2.41.tar.gz -C /tmp
cd /tmp/XML-Parser-2.41
/opt/lampp/bin/perl ./Makefile.PL EXPATLIBPATH=/opt/lampp/lib EXPATINCPATH=/opt/lampp/include
make
make test
make install
Work like a charm in Ubuntu 15.04. The only thing that I need is install Perl XML Parser with:
sudo apt-get install libxml-parser-perl
And following the instructions here, I was able to import successfully all my ratings into Rhythmbox. Now, the only work that I need to do is create again the smart play lists, that is nothing compared with my entire libray ratings.
Today I had the same issue wanting to complile the new GIMP 2.9.4 beta on OSX 10.8 and the aid of homebrew.
First install perl
brew install perl
Then the XML::Parser module by going into the perl shell with
perl -MCPAN -e shell
And inside the shell install XML::Parser by typing
install XML::Parser
Exit shell
exit
Now, verify it has been installed successfully. If everything is ok, you will not see an error.
perl -e "require XML::Parser"
If the ./configure still fails missing XML::Parser, then intltools is not using the perl you have installed. Looking at the script tells me it does the test with $INTLTOOL_PERL -e "require XML::Parser". Trying a echo $INTLTOOL_PERL gave out nothing, so the magic is to set it with
export $INTLTOOL_PERL=perl
Now run ./configure again.
None of the above methods worked for me. I had the right environment variables setup but they were somehow not picked up by cpanm that I use to install perl modules. Expat was also installed.
Here is what I did to overcome the same problem that OP is reporting.
This is very close to what #LadyBuzz suggested.
Download the XML::Parser from cpan.org
Extract the tarball into directory and descend to it.
Open the Makefile.pl and edit the first lines to actually have the absolute paths to both: EXPATLIBPATH and EXPATINCPATH
Save the Makefile.pl, go up one level and create a new tarball with the Makefile.pl that you just edited.
Execute cpanm on the newly created tarball.
This resulted in successful installation of the module.