my #para_text = $mech->xpath('/html/body/form/table/tbody/tr[2]/td[3]/table/tbody/tr[2]/td/table/tbody/tr[3]/td/div/div/div', type => $mech->xpathResult('STRING_TYPE'));
#BELOW IS JUST TO MAKE SURE THE ABOVE CAPTURED THE CORRECT TEXT
print "Look here: #para_text";
$mech->click_button( id => "lnkHdrreplyall");
$mech->eval_in_page('document.getElementsByName("txtbdy")[0].value = "#para_text"');
In the last line of my code I need to put the contents of the #para_text array as the text to output into a text box on a website however from the "document" till the end of the line it needs to be surrounded by ' ' to work. Obviously this doesnt allow interpolation as that would require " " Any ideas on what to do?
To define a string that itself contains double quotes as well as interpolating variable values, you may use the alternative form of the double quote qq/ ... /, where you can choose the delimiter yourself and prevent the double quote " from being special
So you can write
$mech->eval_in_page(qq/document.getElementsByName("txtbdy")[0].value = "#para_text"/)
Related
I'm using AutoHotkey for this as the code is the most understandable to me. So I have a document with numbers and text, for example like this
120344 text text text
234000 text text
and the desired output is
12:03:44 text text text
23:40:00 text text
I'm sure StrReplace can be used to insert the colons in, but I'm not sure how to specify the position of the colons or ask AHK to 'find' specific strings of 6 digit numbers. Before, I would have highlighted the text I want to apply StrReplace to and then press a hotkey, but I was wondering if there is a more efficient way to do this that doesn't need my interaction. Even just pointing to the relevant functions I would need to look into to do this would be helpful! Thanks so much, I'm still very new to programming.
hfontanez's answer was very helpful in figuring out that for this problem, I had to use a loop and substring function. I'm sure there are much less messy ways to write this code, but this is the final version of what worked for my purposes:
Loop, read, C:\[location of input file]
{
{ If A_LoopReadLine = ;
Continue ; this part is to ignore the blank lines in the file
}
{
one := A_LoopReadLine
x := SubStr(one, 1, 2)
y := SubStr(one, 3, 2)
z := SubStr(one, 5)
two := x . ":" . y . ":" . z
FileAppend, %two%`r`n, C:\[location of output file]
}
}
return
Assuming that the "timestamp" component is always 6 characters long and always at the beginning of the string, this solution should work just fine.
String test = "012345 test test test";
test = test.substring(0, 2) + ":" + test.substring(2, 4) + ":" + test.substring(4, test.length());
This outputs 01:23:45 test test test
Why? Because you are temporarily creating a String object that it's two characters long and then you insert the colon before taking the next pair. Lastly, you append the rest of the String and assign it to whichever String variable you want. Remember, the substring method doesn't modify the String object you are calling the method on. This method returns a "new" String object. Therefore, the variable test is unmodified until the assignment operation kicks in at the end.
Alternatively, you can use a StringBuilder and append each component like this:
StringBuilder sbuff = new StringBuilder();
sbuff.append(test.substring(0,2));
sbuff.append(":");
sbuff.append(test.substring(2,4));
sbuff.append(":");
sbuff.append(test.substring(4,test.length()));
test = sbuff.toString();
You could also use a "fancy" loop to do this, but I think for something this simple, looping is just overkill. Oh, I almost forgot, this should work with both of your test strings because after the last colon insert, the code takes the substring from index position 4 all the way to the end of the string indiscriminately.
I'm writing a program in Progress, OpenEdge, ABL, and whatever else it's known as.
I have a CSV file that is delimited by commas. However, there is a "gift message" field, and users enter messages with "commas", so now my program will see additional entries because of those bad commas.
The CSV fields are not in double qoutes so I CAN NOT just use my main method with is
/** this next block of code will remove all unwanted commas from the data. **/
if v-line-cnt > 1 then /** we won't run this against the headers. Otherwise thhey will get deleted **/
assign
v-data = replace(v-data,'","',"\t") /** Here is a special technique to replace the comma delim wiht a tab **/
v-data = replace(v-data,','," ") /** now that we removed the comma delim above, we can remove all nuisance commas **/
v-data = replace(v-data,"\t",'","'). /** all nuisance commas are gone, we turn the tabs back to commas. **/
Any advice?
edit:
From Progress, I cal call Linux commands. So I should be able to execute C++/PHP/Shell etc all from my Progress Program. I look forward to advice, until then I shall look into using external scripts.
You are not providing quite enough data for a perfect answer but given what you say I think the IMPORT statement should handle this automatically.
In my example here commaimport.csv is a comma-separated csv-file with quotes around text fields. Integers, logical variables etc have no quotes. The last field contains a comma in one line:
commaimport.csv
=======================
"Id1", 123, NO, "This is a message"
"Id2", 124, YES, "This is a another message, with a comma"
"Id3", 323, NO, "This is a another message without a comma"
To import this file I define a temp-table matching the file layout and use the IMPORT statement with comma as delimiter:
DEFINE TEMP-TABLE ttImport NO-UNDO
FIELD field1 AS CHARACTER FORMAT "xxx"
FIELD field2 AS INTEGER FORMAT "zz9"
FIELD field3 AS LOGICAL
FIELD field4 AS CHARACTER FORMAT "x(50)".
INPUT FROM VALUE("c:\temp\commaimport.csv").
REPEAT :
CREATE ttImport.
IMPORT DELIMITER "," ttImport.
END.
INPUT CLOSE.
FOR EACH ttImport:
DISPLAY ttImport.
END.
You don't have to import into a temp-table. You could import into variables instead.
DEFINE VARIABLE c AS CHARACTER NO-UNDO FORMAT "xxx".
DEFINE VARIABLE i AS INTEGER NO-UNDO FORMAT "zz9".
DEFINE VARIABLE l AS LOGICAL NO-UNDO.
DEFINE VARIABLE d AS CHARACTER NO-UNDO FORMAT "x(50)".
INPUT FROM VALUE("c:\temp\commaimport.csv").
REPEAT :
IMPORT DELIMITER "," c i l d.
DISP c i l d.
END.
INPUT CLOSE.
This will render basically the same output:
You don't show what your data file looks like. But if the problematic field is the last one, and there are no quotes, then your best bet is probably to read it using INPUT UNFORMATTED to get it a line at a time, and then split the line into fields using ENTRY(). That way you can treat everything after the nth comma as a single field no matter how many commas the line has.
For example, say your input file has three columns like this:
boris,14.23,12 the avenue
mark,32.10,flat 1, the grange
percy,1.00,Bleak house, Dartmouth
... so that column three is an address which might contain a comma and is not enclosed in quotes so that IMPORT DELIMITER can't help you.
Something like this would work in that case:
/* ...skipping a lot of definitions here ... */
input from "datafile.csv".
repeat:
import unformatted v-line.
create tt-thing.
assign tt-thing.name = entry(1, v-line, ',')
tt-thing.price = entry(2, v-line, ',')
tt-thing.address = entry(3, v-line, ',').
do v=i = 4 to num-entries(v-line, ','):
tt-thing.address = tt-thing.address
+ ','
+ entry(v-i, v-line, ',').
end.
end.
input close.
I'm creating a plot where I want to combine two strings into a title. I want to color the other part of my string. Here is my code (it will explain itself better):
title([csv_name ', {\color{blue}Bowel AUC: ' num2str(bowelAUC) ' }'])
In the variable csv_name I have a filename containing underscore _ characters and in the variable bowelAUC I have a number. I can color only part of my title string by using the guide in this post, that is using tex, but the problem now is that tex interpreter would also interpret the csv_name variable and I don't want this. Here you can see what I get:
The filename looks like this: ExportedPressure_130A_10-29-2014.csv
So I want title to interpret only the second part of my title, not the first...how to do this?
You need to replace _ by \_ so that TeX interprets them correctly. To do that you can use regexprep (note that within regexprep both characters are escaped again):
csv_name_escaped = regexprep(csv_name, '\_', '\\\_');
title([csv_name_escaped ', {\color{blue}Bowel AUC: ' num2str(bowelAUC) ' }'])
I am using an input box to request a string from the user that has the form "sometext5". I would like to separate this via regexp into a variable for the string component and a variable for the number. The number then shall be used in a loop.
The following just returns "0", even when I enter a string in the form "itemize5"
!n::
InputBox, UserEnv, Environment, Please enter an environment!, , 240, 120
If ErrorLevel
return
Else
FoundPos := RegExMatch(%UserEnv%, "\d+$")
MsgBox %FoundPos%
retur
n
FoundPos, as its name implies, contains the position of the leftmost occurrence of the needle. It does not contain anything you specifically want to match with your regex.
When passing variable contents to a function, don't enclose the variable names in percent signs (like %UserEnv%).
Your regex \d+$ will only match numbers at the end of the string, not the text before it.
A possible solution:
myText := "sometext55"
if( RegExMatch(myText, "(.*?)(\d+)$", splitted) ) {
msgbox, Text: %splitted1%`nNumber: %splitted2%
}
As described in the docs, splitted will be set to a pseudo-array (splitted1, splitted2 ...), with each element containing the matched subpattern of your regex (the stuff that is in between round brackets).
I fill a DataSet and allow the user to enter a search string. Instead of hitting the database again, I set the RowFilter to display the selected data. When the user enters a square bracket ( "[" ) I get an error "Error in Like Operator". I know there is a list of characters that need prefixed with "\" when they are used in a field name, but how do I prevent RowFilter from interpreting "[" as the beginning of a column name?
Note: I am using a dataset from SQL Server.
So, you are trying to filter using the LIKE clause, where you want the "[" or "]" characters to be interpreted as text to be searched ?
From Visual Studio help on the DataColumn.Expression Property :
"If a bracket is in the clause, the bracket characters should be escaped in brackets (for example [[] or []])."
So, you could use code like this :
DataTable dt = new DataTable("t1");
dt.Columns.Add("ID", typeof(int));
dt.Columns.Add("Description", typeof(string));
dt.Rows.Add(new object[] { 1, "pie"});
dt.Rows.Add(new object[] { 2, "cake [mud]" });
string part = "[mud]";
part = part.Replace("[", "\x01");
part = part.Replace("]", "[]]");
part = part.Replace("\x01", "[[]");
string filter = "Description LIKE '*" + part + "*'";
DataView dv = new DataView(dt, filter, null, DataViewRowState.CurrentRows);
MessageBox.Show("Num Rows selected : " + dv.Count.ToString());
Note that a HACK is used. The character \x01 (which I'm assuming won't be in the "part" variable initially), is used to temporarily replace left brackets. After the right brackets are escaped, the temporary "\x01" characters are replaced with the required escape sequence for the left bracket.