I am getting Access violation exception in the highlighed line.
Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
I have the certificate on the hsm and the label . I am building my application as x64
public void getCertificateFromHSM(string certLabel) {
List<ObjectAttribute> objectAttributes = new List<ObjectAttribute>();
objectAttributes.Add(new ObjectAttribute(CKA.CKA_CLASS, CKO.CKO_CERTIFICATE));
objectAttributes.Add(new ObjectAttribute(CKA.CKA_LABEL, certLabel));
**session.FindObjectsInit(objectAttributes);** --Exception from here
// Get search results
List<ObjectHandle> foundObjects = session.FindObjects(2);
// Terminate searching
session.FindObjectsFinal();
// Prepare list of empty attributes we want to read
List<CKA> attributes = new List<CKA>();
attributes.Add(CKA.CKA_LABEL);
attributes.Add(CKA.CKA_VALUE);
}
I am getting exception from this line session.FindObjectsInit();. I am new to pkcs11.
Any help in this regard is appreciated.
I also tried to build the application as 32 bit by passing the 32bit crypto.dll ,but in that case i am getting exception from this line in PKCS11Interop Net.Pkcs11Interop.LowLevelAPI81.Delegates.InitializeWithGetFunctionList(IntPtr libraryHandle) and the exception is
Value was either too large or too small for a UInt32. OverflowExcepiton was unhandled.
You seem to be using wrong set of HighLevelAPIs. You need to use classes from Net.Pkcs11Interop.HighLevelAPI namespace without any numbers at the end.
In other words you need to use following line
using Net.Pkcs11Interop.HighLevelAPI;
in your code instead of
using Net.Pkcs11Interop.HighLevelAPI81;
See Pkcs11Interop library architecture for more info and you can also take a look at official code samples which are using Net.Pkcs11Interop.HighLevelAPI too.
Related
I love testing-library, have used it a lot in a React project, and I'm trying to use it in an Angular project now - but I've always struggled with the enormous error output, including the HTML text of the render. Not only is this not usually helpful (I couldn't find an element, here's the HTML where it isn't); but it gets truncated, often before the interesting line if you're running in debug mode.
I simply added it as a library alongside the standard Angular Karma+Jasmine setup.
I'm sure you could say the components I'm testing are too large if the HTML output causes my console window to spool for ages, but I have a lot of integration tests in Protractor, and they are SO SLOW :(.
I would say the best solution would be to use the configure method and pass a custom function for getElementError which does what you want.
You can read about configuration here: https://testing-library.com/docs/dom-testing-library/api-configuration
An example of this might look like:
configure({
getElementError: (message: string, container) => {
const error = new Error(message);
error.name = 'TestingLibraryElementError';
error.stack = null;
return error;
},
});
You can then put this in any single test file or use Jest's setupFiles or setupFilesAfterEnv config options to have it run globally.
I am assuming you running jest with rtl in your project.
I personally wouldn't turn it off as it's there to help us, but everyone has a way so if you have your reasons, then fair enough.
1. If you want to disable errors for a specific test, you can mock the console.error.
it('disable error example', () => {
const errorObject = console.error; //store the state of the object
console.error = jest.fn(); // mock the object
// code
//assertion (expect)
console.error = errorObject; // assign it back so you can use it in the next test
});
2. If you want to silence it for all the test, you could use the jest --silent CLI option. Check the docs
The above might even disable the DOM printing that is done by rtl, I am not sure as I haven't tried this, but if you look at the docs I linked, it says
"Prevent tests from printing messages through the console."
Now you almost certainly have everything disabled except the DOM recommendations if the above doesn't work. On that case you might look into react-testing-library's source code and find out what is used for those print statements. Is it a console.log? is it a console.warn? When you got that, just mock it out like option 1 above.
UPDATE
After some digging, I found out that all testing-library DOM printing is built on prettyDOM();
While prettyDOM() can't be disabled you can limit the number of lines to 0, and that would just give you the error message and three dots ... below the message.
Here is an example printout, I messed around with:
TestingLibraryElementError: Unable to find an element with the text: Hello ther. This could be because the text is broken up by multiple elements. In this case, you can provide a function for your text matcher to make your matcher more flexible.
...
All you need to do is to pass in an environment variable before executing your test suite, so for example with an npm script it would look like:
DEBUG_PRINT_LIMIT=0 npm run test
Here is the doc
UPDATE 2:
As per the OP's FR on github this can also be achieved without injecting in a global variable to limit the PrettyDOM line output (in case if it's used elsewhere). The getElementError config option need to be changed:
dom-testing-library/src/config.js
// called when getBy* queries fail. (message, container) => Error
getElementError(message, container) {
const error = new Error(
[message, prettyDOM(container)].filter(Boolean).join('\n\n'),
)
error.name = 'TestingLibraryElementError'
return error
},
The callstack can also be removed
You can change how the message is built by setting the DOM testing library message building function with config. In my Angular project I added this to test.js:
configure({
getElementError: (message: string, container) => {
const error = new Error(message);
error.name = 'TestingLibraryElementError';
error.stack = null;
return error;
},
});
This was answered here: https://github.com/testing-library/dom-testing-library/issues/773 by https://github.com/wyze.
I am a student who begin to study SHOP2 from China.
My teacher told me to run JSHOP2 in Eclipse.Now I can run original zenotravel problem and generate GUI and plans.Likewise, I want to put other domain and problems to SHOP2 and produce plans.
But the problem is that I don't know how to compile them and My teacher only asked me to run the the main function in Internaldomain but it can't succeed.Follow is the original code:
public static void main(String[] args) throws Exception
{
//compile();
// compile(args);
//-- run the planning algorithm
run(args);
}
This code can run zenotravel.Then I put domain and problems named pfile1 and
tdepots respectively into SHOP2 folder.Change the codes to:
{
compile(domaintdepots);
// compile(args);
//-- run the planning algorithm
run(args);
}
It warns "domainpdfiles cannot be resolved to a variable".
Or
//--compile();
compile(args);
//-- run the planning algorithm
//run(args);
It turns out:
"Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: 0
at JSHOP2.InternalDomain.compile(InternalDomain.java:748)
at JSHOP2.InternalDomain.main(InternalDomain.java:720)"
720 is main funcition above.And 748 is compile function:
public static void compile(String[] args) throws Exception
{
//-- The number of solution plans to be returned.
int planNo = -1;
//-- Handle the number of solution plans the user wants to be returned.
if (args.length == 2 || args[0].substring(0, 2).equals("-r")) {
if (args[0].equals("-r"))
planNo = 1;
else if (args[0].equals("-ra"))
planNo = Integer.MAX_VALUE;
else try {
planNo = Integer.parseInt(args[0].substring(2));
} catch (NumberFormatException e) {
}
}
Finally,according to the advice of the friend,I put the two pddls into src folder and use “java Jshop2.InternalDomain domaintdepots”in CMD commad but an error appeared:"the main class Interdomain can't be found or loaded".But I have set the class path accurately and the Zenotravel planning can run.So how
and where can I use the command ？
And what is written in the bracket"compile()" in Eclipse？
I am also not familiar with JAVA so it's better if there is concrete instruction.Thanks a lot.
Please describe what are you trying to build, what is it supposed to do, what is the expected end result.
If you do have a valid PDDL domain and problem file, you could try to load them into the online http://editor.planning.domains/ editor using the File > Load menu. Then press the Solve button and confirm which of the file is the domain and which is problem. If the PDDL model is valid (and the underlying solver can handle the requirements), you will get a plan back.
If you are trying to build a software solution that needs a PDDL-based planning engine as one of its component, perhaps you could use one of the available implementations: https://nergmada.github.io/pddl-reference/guide/whatisplanner.html#list-of-planners
If you are trying to build your own planning engine in Java using the Eclipse IDE, you probably need a Java-based PDDL parser. Here is a tutorial, how to use pddl4j for that purpose:
https://github.com/pellierd/pddl4j/wiki/A-tutorial-to-develop-your-own-planner
If you need to use Jshop2 in particular, it looks from their documentation (http://www.cs.umd.edu/projects/shop/description.html) that you need to indeed compile the domain and problem PDDL into Java code using following commands:
java JSHOP2.InternalDomain domainFileName
java JSHOP2.InternalDomain -r problemFileName
Edited on June 19th
Java package names (e.g. JSHOP2) and class names (InternalDomain) are case sensitive, so make sure you type them as per the documentation. That is probably why you are getting the "main class not found error".
It is difficult to say what the lines numbers 748 and 720 exactly correspond to, because in the GitHub repo https://github.com/mas-group/jshop2/blob/master/src/JSHOP2/InternalDomain.java the code is different from yours. Can you indicate in your questions which lines those are exactly?
The make file shows how to execute an out-of-the-box example in the distribution:
cd examples\blocks
java JSHOP2.InternalDomain blocks
java JSHOP2.InternalDomain -r problem300
Does that work for you?
How do I "tell" EF to log queries globally? I was reading this blog post: EF logging which tells in general how to log sql queries. But I still have a few questions regarding this logger.
Where would I need to place this line context.Database.Log = s =>
logger.Log("EFApp", s);?
Can it be globally set? Or do I have to place it everywhere I do DB
operations?
In the "Failed execution" section, the blogger wrote that, and I
quote:
For commands that fail by throwing an exception, the output contains the message from the exception.
Will this be logged too if I don't use the context.Database.Log?
Whenever you want the context to start logging.
It appears to be done on the context object so it should be done every time you create a new context. You could add this line of code in your constructor though to ensure that it is always enabled.
It will not log if you do not enable the logging.
I don't recommend to use that's functionality, because, it hasn't reason to exists in the real case.
Thats it use a lot of to debug code only. But, wether you wanna know more than details ... access link... https://cmatskas.com/logging-and-tracing-with-entity-framework-6/
In this case you can put code like this
public void Mylog()
{
//Thats a delegate where you can set this property to log using
//delegate type Action, see the code below
context.Database.Log = k=>Console.Write("Any query SQL")
//Or
context.Database.Log = k=>Test("Any query SQL")
}
public void Test(string x){
Console.Write(x)
}
I hope thats useufull
I was using Breeze v1.1.2 that came with the Hot Towel template which has now been extended to form my project. I made the mistake of updating the NuGet package to the current 1.3.3 (I never learn). Anyway, all was well, and now not so much!
I followed the instructions in the release notes and other docs to change my BreezeWebApiConfig file to:
[assembly: WebActivator.PreApplicationStartMethod(
typeof(BreezeWebApiConfig), "RegisterBreezePreStart")]
namespace MyApp.App_Start {
public static class BreezeWebApiConfig {
public static void RegisterBreezePreStart() {
GlobalConfiguration.Configuration.Routes.MapHttpRoute(
name: "BreezeApi",
routeTemplate: "breeze/{controller}/{action}"
);}}}
And the config.js file (which provides the serviceName to the EntityManager constructor) to:
var remoteServiceName = 'breeze/breeze'; // NEW version
//var remoteServiceName = 'api/breeze'; // OLD version
And my BreezeController if you're interested:
[BreezeController]
public class BreezeController : ApiController
{
readonly EFContextProvider<MyDbContext> _contextProvider =
new EFContextProvider<MyDbContext>();
[HttpGet]
public string Metadata()
{
return _contextProvider.Metadata();
}
[HttpGet]
public IQueryable<SomeItem> SomeItems()
{
// Do stuff here...
}
}
Now I get the "cannot execute _executeQueryCore until metadataStore is populated" error.
What am I missing here?
EDIT:
I perhaps left out the part you needed... Above in the SomeItems() method, the stuff that actually gets done is a call to the GetMeSomeData() method in the MyDBContext class. This method makes the following call to a stored procedure to get the data.
public virtual ObjectResult<SomeItem> GetMeSomeData(string inParam)
{
var p = new object[] { new SqlParameter("#inParam", inParam) };
var retVal = ((IObjectContextAdapter)this).ObjectContext.ExecuteStoreQuery<SomeItem>("exec GetData #SN", p);
return retVal;
}
Now given my limited understanding, the call to Metadata() is not failing, but I don't think it has any idea what the entity model is when coming back, even though somewhere along the line, it should figure that out from the entity model I do have (i.e. SomeItem)? The return string from Metadata() doesn't have any information about the entity. Is there a way to make it aware? Or am I just completely off in left field playing with the daisies?
Hard to say based on this report. Let's see if Breeze is right.
Open the browser debugging tools and look at the network traffic. Do you see an attempt to get metadata from the server before you get that error? If so, did it succeed? Or 404? Or 500? What was the error?
I'm betting it didn't even try. If it didn't, the usual reason is that you tried some Breeze operation before your first query ... and you didn't ask for metadata explicitly either. Did you try to create an entity? That requires metadata.
The point is, you've got to track down the Breeze operation that precipitates the error. Sure everything should just work. The world should be rainbows and unicorns. When it isn't, we heave a sigh, break out the debugger, and start with the information that the error gave us.
And for the rest of you out there ... upgrading to a new Breeze version is a good thing.
Happy coding everyone.
Follow-up to your update
Breeze doesn't know how you get your data on the back-end. If the query result has a recognizable entity in it, Breeze will cache that. It's still up to you in the query callback to ensure that what you deliver to the caller is something meaningful.
You say that you're server-side metadata method doesn't have any idea what SomeItem is? Then it's not much use to the client. If it returns a null string, Breeze may treat that as "no metadata at all" in which case you should be getting the "cannot execute _executeQueryCore until metadataStore is populated" error message. Btw, did you check the network traffic to determine what your server actually returned in response to the metadata request (or if there was such a request)?
There are many ways to create Metadata on the server. The easiest is to use EF ... at least as a modeling tool at design time. What's in that MyDbContext of yours? Why isn't SomeItem in there?
You also can create metadata on the client if you don't want to generate it from the server. You do have to tell the Breeze client that you've made that choice. Much of this is explained in the documentation "Metadata Format".
I get the feeling that you're kind of winging it. You want to stray from the happy path ... and that's cool. But most of us need to learn to walk before we run.
Hi i am using Enterprise library 5.0 to log messages in text file, as a part of that i need to log collection of messages to the text file .
Below is the part of code which logs to text file using flatfilelistener
public void LogToFile(string message, string category, IDictionary<string, object> additionalDetail)
{
var logger = EnterpriseLibraryContainer.Current.GetInstance<LogWriter>();
logger.Write(message, category, 0, 0, TraceEventType.Error, string.Empty, additionalDetail);
}
The above will log single message in text file, like that i will call for each item in collection which i need to log.
So , how to log everything in single stretch? like placing in buffer and updating logfile on single stretch.
I guess there is one property named "AutoFlush" but i don't know how to use that.
using auto flush
That is likely your best bet. Just let the buffer handle it or create a custom flush mechanism that you can call at a specified duration such as the end of a http request or if you are paranoid perhaps when an application crashes and you can't trust autoflush to work.