I am trying to find the path to mongo.exe after following the https://docs.mongodb.com/master/tutorial/install-mongodb-on-ubuntu/?_ga=1.252350281.1547134441.1490924163
Tutorial.
However, it appears that the mongo.exe file is no where to be found?
Does anyone know the default directory that this file installs into? I've googled everywhere for an answer and have not seen any results either.
The reason I am doing this is to connect it to intellij.
The file defaults to usr/bin/mongo.exe
After successful installation, the executable defaults to /usr/bin/mongod .
Related
I am trying to set up the PHPCS plugin, but so far I am only getting this error:
phpcs: Unknown error ocurred. Please verify that /home/[user]/Documents/offprojects/vet_direct/vetsdirectapp/vendor/bin/phpcs --report=json -q --encoding=UTF-8 --error-severity=5 --warning-severity=5 --stdin-path=/home/[user]/Documents/offprojects/vet_direct/vetsdirectapp/app/Http/Controllers/JobController.php - returns a valid json object.
I followed the installation guide from the plugin page and installed PHPCS both globally and in the project. Also, the command in terminal shows this error:
zsh: command not found: phpcs
Any idea what is wrong here?
This might not help you, but for me, the executable path wasn't correct and the version of PHPCS didn't support PHP 7, it was still using PHP 5.
I'm going to assume you're on Linux based OS.
Since you have already installed PHPCS globally, access the phpcs file. This should be somewhere like ~/.config/composer/vendor/squizlabs/php_codesniffer/bin if you're on Debian based Linux OS (like Ubuntu Focal Fossa 20.04LTS). But it might differ depending on versions.
If you use a text editor to peek the phpcs file inside it (this will be the same on your Executable Path), it might say PHP 5, that's how I found I needed to upgrade mine.
To upgrade your PHPCS do composer global require "squizlabs/php_codesniffer=*" this might fix your issue. After that, you might need to fix your Executable Path again, I had to do mine.
To edit the executable path on Visual Studio Code Command + , (or go to settings) then search for PHP CodeSniffer. Go down to Executable Path and make sure it's correct.
This might not work, but it's worth a try.
After trying a lof of different things, this is what worked for me. I'm on a Mac and using Zsh.
First, installed PHP Code Sniffer (phpcs) with Composer, as Hugo suggested on the answer above:
composer global require "squizlabs/php_codesniffer=*"
But then, I had to edit my .zshrc and added this line:
export PATH=/Users/YOURUSER/.composer/vendor/bin:$PATH
After that, close the Terminal and I was able to run phpcs -h
In my case an error was being thrown by various processes "Could not load xdebug because it is already loaded". This did not show in VSCode, but did if I ran php -v or php --ini.
This is what cleared the error for me:
Edit the /etc/php/8.0/apache2/conf.d/xdebug.ini file and comment out the line zend_extension=xdebug.so. Restart apache with sudo systemctl restart apache2, then try php -v. The "Could not load xdebug because it is already loaded" error should be gone. Restart VSCode and this phpcs error should stop showing.
I have VSCode configured to debug php and have the xdebug configuration settings in both the etc/php/php8.0/apache2/php.ini and etc/php/php/8.0/cli/php.ini files.
How I discovered this is I downloaded the source code and searched for where that error was being thrown. What I found was that ANY error in stderr outside of a very narrow range gets this error message. I had noticed this error showing in my terminal, and I researched how to clear it. When I did, the VSCode phpcs error went away!
On Windows:
Open the XAMPP Control Panel.
Apache -> Config -> php.ini
Search for zend_extension=xdebug.so or something the like and delete it.
Restart Apache.
Try again.
In my case, It was happening due to XDebug and resolved after disabling xdebug from Xampp.
Goto C:\xampp\php\php.ini
find and disable (add ;) before following lines
Change :
xdebug.mode=debug
xdebug.start_with_request=yes
zend_extension = "C:\xampp\php\ext\php_xdebug.dll"
to :
;xdebug.mode=debug
;xdebug.start_with_request=yes
;zend_extension = "C:\xampp\php\ext\php_xdebug.dll"
Restart Apache and then vscode. It should fix that.
I recently uninstalled MongoDB 3.2 to install MongoDB 3.6. Since then, every time I try to launch mongod, I get the following error: failed to open minidump file C:\Program Files\MongoDB\Server\3.2018-02-18T17-02-35.mdmp : Access is denied.
I'm not even quite sure why it says Access is denied because, as I mentioned, I uninstalled MongoDB 3.2 hence the server/3.2/ directory doesn't exist anymore. So is there a way to change where MongoDB looks for this file?
Also, notice how the path seems to be missing a slash right after 3.2...... It does appear like that in my terminal, it's not a typo, I'm not sure about what I should think of that.
I am running Windows 10. And I want to point out that I did use the MongoDB 'wizard' to uninstall version 3.2 of MongoDB.
EDIT: I decided to wipe all of my database data folder and seed back the database and for now it seems to be working fine but I'll leave the question open until we can find a definitive answer to the problem, if possible
I had the same problem with a project which was working fine for me until then.
I used the following command and everything went back to normal:
mongod --dbpath "path" --repair
Please check the mongod.conf file to find out the dbpath. If the path is correct, update the folder permissions to give the mongodb user the required permissions in Control Panel. I am sorry that I don't have Microsoft System to find out the location of the mongod.conf file.
The usual path for Ubuntu system is /etc/mongod.conf and in the case of Mac it is /usr/local/etc/mongod.conf and you can edit using the command if you want to change the path.
sudo nano /usr/local/etc/mongod.conf
In the case of Ubuntu or Linux or Mac the following command can be given.
sudo chown -R mongodb /datadrive1/mongodb
Maybe stackoverflow is not for posting this kind of questions, and if it's that way, i apology..
I got a problem when using Textmate, it doesn't recognize wget, when i try to run wget from it, it says:
wget: command not found
The sh bundle is using the last version of ssh (the homebrew one, i set the TM_SHELL & SHELL manually) and everything so far seems to work (all other commands) but not wget, any clue?
Thanks in advance!
EDIT: I forgot to say, running wget from console works fine.
I guess wget is installed at /usr/local/bin via brew or something... By default, that directory is not in TextMates PATH environment variable.
You can extend the environment either by setting PATH to $PATH:/usr/local/bin under Preferences -> Variables or by setting
PATH = "$PATH:/usr/local/bin"
in your ~/.tm_properties file (That would /User/yourusername/.tm_properties, just in case you are not familiar with the "~" alias to your home directory).
I just newly upgraded my ubuntu to 13.10, and I found the menus of Mule Studio (64-bit linux) upon the unity bar freezing up, i.e. can't open any menu from there.
Has anyone else come across the same issue? And is there a possible solution?
Create a file with any Name. Example. Mule
Add the following line in to the file
Exec=env UBUNTU_MENUPROXY=0 /opt/MuleStudio/MuleStudio
Make sure the path /opt/MuleStudio/MuleStudio is your MuleStudio executable path
Save the file and Exit
Got to command prompt and execute the below like to give executable permission to the file.
~$ cd [your file path]
~$ chmod 777 Mule
and then execute the file using the below command,
~$ ./Mule
Now you can get your Menu in your Mule studio...
Hope it helps.
The problem is caused by a bug in Ubuntu affecting both eclipse and studio. I was able to work around it by following the steps available here
I just installed Postgres.app on my Mac but it won't work properly. I finished the installation and the app icon is on the menu bar and it says it is listening on port 5432, however, that is what happens if I try to run it from the command-line:
~ $ psql
zsh: correct 'psql' to 'sl' [nyae]? n
zsh: command not found: psql
I had previously installed PostgreSQL via Homebrew but removed it before installing Postgres.app. I am running Mac OS X Lion.
I appreciate any help, I really want to have PostgreSQL running on my machine.
The psql binary for Postgres.app is inside the application bundle and you'll have to add the appropriate directory to your PATH. From the fine manual:
Configure your $PATH
Postgres.app includes many command line tools. If you want to use them, you must configure the $PATH variable.
If you are using bash (default shell on OS X), add the following line to ~/.bash_profile:
export PATH=$PATH:/Applications/Postgres.app/Contents/Versions/latest/bin
[...]
So adjust your PATH setting in your zsh config files to include the
Contents/Versions/latest/bin
directory inside your Postgres.app bundle.
I'm reading this as of April 2014 and the directory you must include in your path as far as my Postgres app is concerned is slightly different.
I had to include this:
PATH="/Applications/Postgres.app/Contents/Versions/9.3/bin:$PATH"
I can now run psql in my terminal.
On zsh shell you have the modify .zshrc:
PSQL_PATH="/Applications/Postgres.app/Contents/Versions/latest/bin"
PATH="$PATH:$PSQL_PATH"
On prompt:
exec $SHELL
which psql
What you should do is to use /latest instead of version so you dont need to change it again when updating Postgres.
How to: http://postgresapp.com/documentation/cli-tools.html
then run:
. ~/.bash_profile
to reload .bash_profile and update any functions you add.
This might seem stupid, but I'm curious where you installed Postgres.app? As was suggested in mu is too short's answer, the documentation mentions adding /Applications/Postgres.app/Contents/MacOS/bin to your path. However, this requires that you have installed Postgres.app in your /Applications/ folder.
Before trying any of the more complicated solutions you might have found on Stack Overflow, and other resources via Google, you should make sure you've installed Postgres.app to the right place. It may be as simple as moving Postgres.app to /Applications/ since psql will be found in /Applications/Postgres.app before any other places.
Alternatively, you could use whatever path to Postgres.app you would like. So if you want it in your home directory, then you could use export PATH="~/Postgres.app/Contents/MacOS/bin:$PATH".
HTH
I'm a previous Ubuntu user, now in OSX Trying to run the "which sql" and "pg_restore" commands directly from a terminal I opened didn't work. I clicked on the elephant icon and opened a terminal by "Open psql". Once I've quit from the psql console and written the commands in that terminal, they all worked.
On ZSH terminal, before trying the above solutions you have to install Postgres in the first place. While using Hombrew
First, hit,
brew install postgres Then check if it is installed by which psql