now I'm trying to conduct load test with gatling.
I have been trying create gatling's simulation script via gatling recorder and
it was going well.
but, when I executed that, I encountered file not found error below although there are files
(in this case /step1/0006_request.json is exist)
request_6: Failed to build request: Resource /step1/0006_request.json not found
there are many json files and that error occurred some of specific post requests.
every requests which is failed are composed following setting.
using request header 'headers_6' below
using RawFileBody method
(even if this is obvious thing because content-type is 'application/json')
I already have been using 12 hour over and I have to finish my task in a timely manner.
I'm so sorry about that I can't share my application which is target of this issue.
if anyone have any idea or kindly want to more detail please ask me.
val headers_6 = Map(
"Content-Type" -> "application/json",
"Origin" -> "applicationServerURL")
.exec(http("request_6")
.post("requestUrl")
.headers(headers_6)
.body(RawFileBody("/step1/0006_request.json"))
.resources(http("request_7")
additionally, I checked json files which were created by gatling recorder on 'resource' directory, them contains only one char 'X'.
this means Gatling recorder doesn't capture request json file's content?
env:
Gatling version gatling 3.5.1
Used Browser: FireFox
I just solved this issue.
this issue was caused by very simple fact.
firstly, I encountered error message below
request_6: Failed to build request: Resource /step1/0006_request.json not found
and I have to check the file paths although this script was auto created by gatling recorder(do not trust gatling tool).
The auto created file path was absolute path and start with ‘/’. And the script started to work once I remove the ‘/’.
I referred other post on stack overflow, and it was written that file path must be written with absolute path if you are using gatling version 3 or later version.
I hope my reply can be informative to someone who may be having same issue as me.
Using 'relative path'.
//As is
.exec(http("request_6")
.post("requestUrl")
.headers(headers_6)
.body(RawFileBody("/step1/0006_request.json"))
.resources(http("request_7")
//To be
.exec(http("request_6")
.post("requestUrl")
.headers(headers_6)
.body(RawFileBody("step1/0006_request.json"))
.resources(http("request_7")
I'm trying to configure PLAIN authentification based on JPAM 1.1 and am going crazy since it doesnt work after x times checking my syntax and settings. When I start drill with cluster-id and zk-connect only, it works, but with both options of PLAIN authentification it fails. Since I started with pam4j and tried JPAM later on, I kept JPAM for this post. In general I don't have any preferences. I just want to get it done. I'm running Drill on CentOS in embedded mode.
I've done anything required due to the official documentation:
I downloaded JPAM 1.1, uncompressed it and put libjpam.so into a specific folder (/opt/pamfile/)
I've edited drill-env.sh with:
export DRILLBIT_JAVA_OPTS="-Djava.library.path=/opt/pamfile/"
I edited drill-override.conf with:
drill.exec: {
cluster-id: "drillbits1",
zk.connect: "local",
impersonation: {
enabled: true,
max_chained_user_hops: 3
},
security: {
auth.mechanisms: ["PLAIN"],
},
security.user.auth: {
enabled: true,
packages += "org.apache.drill.exec.rpc.user.security",
impl: "pam",
pam_profiles: [ "sudo", "login" ]
}
}
It throws the subsequent error:
Error: Failure in starting embedded Drillbit: org.apache.drill.exec.exception.DrillbitStartupException: Problem in finding the native library of JPAM (Pluggable Authenticator Module API). Make sure to set Drillbit JVM option 'java.library.path' to point to the directory where the native JPAM exists.:no jpam in java.library.path (state=,code=0)
I've run that *.sh file by hand to make sure that the necessary path is exported since I don't know if Drill is expecting that. The path to libjpam should be know known. I've started Sqlline with sudo et cetera. No chance. Documentation doesn't help. I don't get it why it's so bad and imo incomplete. Sadly there is 0 explanation how to troubleshoot or configure basic user authentification in detail.
Or do I have to do something which is not told but expected? Are there any Prerequsites concerning PLAIN authentification which aren't mentioned by Apache Drill itself?
Try change:
export DRILLBIT_JAVA_OPTS="-Djava.library.path=/opt/pamfile/"
to:
export DRILL_JAVA_OPTS="$DRILL_JAVA_OPTS -Djava.library.path=/opt/pamfile/"
It works for me.
I have added a customized module named mod_confirm_delivery in ejabberd which has compiled and added successfully but when i am sending a message an error is coming in my ejabberd error log file, That is:
2016-03-15 17:03:38.306 [error] <0.2653.0>#ejabberd_hooks:run_fold1:368 {undef,[{mod_confirm_delivery,send_packet,[{xmlel,<<"iq">>,[{<<"xml:lang">>,<<"en">>},{<<"type">>,<<"get">>},{<<"id">>,<<"aacfa">>}],[{xmlcdata,<<"\n">>},{xmlel,<<"query">>,[{<<"xmlns">>,<<"jabber:iq:roster">>}],[]},{xmlcdata,<<"\n">>}]},{state,{socket_state,gen_tcp,#Port<0.58993>,<0.2652.0>},ejabberd_socket,#Ref<0.0.1.25301>,false,<<"12664578908237388886">>,undefined,c2s,c2s_shaper,false,false,false,false,[verify_none,compression_none],true,{jid,<<"test1">>,<<"localhost">>,<<"D-5">>,<<"test1">>,<<"localhost">>,<<"D-5">>},<<"test1">>,<<"localhost">>,<<"D-5">>,{{1458,41617,630679},<0.2653.0>},{2,{{<<"test2">>,<<"localhost">>,<<>>},{{<<"test1">>,<<"localhost">>,<<>>},nil,nil},nil}},{2,{{<<"test2">>,<<"localhost">>,<<>>},{{<<"test1">>,<<"localhost">>,<<>>},nil,nil},nil}},{0,nil},undefined,undefined,{userlist,none,[],false},c2s,ejabberd_auth_internal,{{127,0,0,1},41928},[],active,[],inactive,undefined,undefined,1000,undefined,300,300,false,0,0,true,<<"en">>},{jid,<<"test1">>,<<"localhost">>,<<"D-5">>,<<"test1">>,<<"localhost">>,<<"D-5">>},{jid,<<"test1">>,<<"localhost">>,<<>>,<<"test1">>,<<"localhost">>,<<>>}],[]},{ejabberd_hooks,safe_apply,3,[{file,"src/ejabberd_hooks.erl"},{line,382}]},{ejabberd_hooks,run_fold1,4,[{file,"src/ejabberd_hooks.erl"},{line,365}]},{ejabberd_c2s,session_established2,2,[{file,"src/ejabberd_c2s.erl"},{line,1268}]},{p1_fsm,handle_msg,10,[{file,"src/p1_fsm.erl"},{line,582}]},{proc_lib,init_p_do_apply,3,[{file,"proc_lib.erl"},{line,240}]}]}
I have ejabberd 16.02.26 and my module code is:
mod_confirm_delivery.erl
This module is working fine with ejabberd 2.1.13 but i want to upgraded my ejabberd. I can't understand what is the problem and how can I resolve this error.
undef error means the function or module is not found. The most likely error is that the mod_confirm_delivery.beam file is not in Erlang VM path.
You should try moving the compiled beam file with other ejabberd beam files or try setting the path used to launch Erlang to the directory where your mod_confirm_delivery.beam file is located. This is the -pa option of the Erlang VM.
If your code if in right place, other option is that the function is undefined. The hook tries to call mod_confirm_delivery:send_packet/4. Your code is wrong as it indeed does not defined send_packet/4 but only send_packet/3. You need to update your code to match new signature for user_send_packet hook:
user_send_packet(Packet, C2SState, From, To) -> Packet
In case of doubt, you can refer to official hook list in ejabberd documentation: https://docs.ejabberd.im/developer/hooks/
Today I'm exercising an Io example of "seven language of seven weeks."
Example code:
futureResult := URL with("http://google.com/") #fetch
writeln("Do something immediately while fetch goes on in background...")
writeln("This will block until the result is available.")
writeln("fetched ", futureResult size, " bytes")
Running with exception:
Io$ io future.io
Exception: Object does not respond to 'URL'
---------
Object URL future.io 1
CLI doFile Z_CLI.io 140
CLI run IoState_runCLI() 1
Directly run URL in io with following error:
~$ io
Io 20110905
Io> URL
Exception: Object does not respond to 'URL'
---------
Object URL Command Line 1
Io>
My environment is:
Ubuntu 14.04
Followed post , I have done following:
$ sudo apt-get install libevent-dev
$ ./build.sh
$ ./build.sh install
URL error is fixed.
But following error thrown:
Do something immediately while fetch goes on in background... This
will block until the result is available. fetched Exception: Error
does not respond to 'size' --------- Error size
future.io 6 Error size future.io 6 CLI
doFile Z_CLI.io 140 CLI run
IoState_runCLI() 1
Post help to install Io
For anyone else like me who is years later running into this issue (or any other "Exception: Object does not respond to X" issue) while following along with Bruce Tate's Seven Languages in Seven Weeks, the solution may be this:
There are some Objects/libraries which seem like they would be included in core Io based on the documentation, but are not. You must install them as addons with eerie.
To do so, follow the instructions here. Basically, you have to look for the correct addon under the IoLanguage group on Github, and install it.
This particular issue with the URL Object is further complicated by a couple of problems I will expound upon below.
There is no addon for URL, instead the functionality for URL is covered by an addon called Socket (located here.)
To get eerie to install Socket, you first need to install something called libevent. I did this by going to the libevent website, downloading the most recent stable version, extracting the files to a directory, and then following the instructions on how to build libevent with CMake on the libevent github page.
The Socket object seems to not have support for https. The number of websites that still use http is dwindling. Google, the website used in the example in Seven Languages in Seven Weeks, moved away from http years and years ago. The first website I was able to come across that still uses http is a Chinese news website, but you can find other examples by googling around for "Websites still using http."
After accounting for all of these issues, I finally got my version of the code to work.
url := URL with("http://xinhuanet.com/")
// Had to find a website still using http, https is unsupported by Socket.
futureResult := url #fetch
// Moved this call to own line for personal clarity
writeln("Do something immediately while fetching.")
writeln("The below statement will block until the result is available.")
writeln("fetched ", futureResult size, " bytes") // Blocks until complete
And my output looks like:
Do something immediately while fetching.
The below statement will block until the result is available.
fetched 99992 bytes
I'm trying to run pig locally, installed using homebrew, to test a script. However, I get the following error when I attempt to run a simple dump from the interactive prompt pig -x local:
2012-07-16 23:20:40,447 [Thread-7] INFO org.apache.pig.backend.hadoop.executionengine.util.MapRedUtil - Total input paths (combined) to process : 1
[Fatal Error] :63:85: Character reference "" is an invalid XML character.
2012-07-16 23:20:40,688 [Thread-7] FATAL org.apache.hadoop.conf.Configuration - error parsing conf file: org.xml.sax.SAXParseException: Character reference "" is an invalid XML character.
The same load/dump works fine on Elastic MapReduce.
I can't find any XML config files, and I've tried with both version 0.9.2 and 0.10.0
What am I missing?
Edit: Just checked a direct download (vs. homebrew) and it doesn't seem to work either
You should check that your Hadoop configuration files have correct configuration data.
Have a look in your hadoop/conf directory.
Have a look inside:
hdfs-site.xml
mapred-site.xml
core-site.xml
Finally worked out what the problem was. I ended up having to use dtruss -p on the pig/java process. This revealed a temporary directory and dynamically generated xml files. Once the temporary directory was discovered, it all fell quickly into place.
It was picking up the proxy excludes from my network connections, which had, as far as I can tell,  (http://www.fileformat.info/info/unicode/char/02/index.htm) embedded in it. How this invalid value came to be in my network preferences in the first place, I haven't the faintest clue.
The value was then being pulled into dynamically generated files, for example /tmp/hadoop-vertis/mapred/staging/vertis-1005847898/.staging/job_local_0001/job.xml.
The offending lines:
<property><name>ftp.nonProxyHosts</name><value>localhost|*.localhost|127.0.0.1|h|*.h</value></property>
<property><name>socksNonProxyHosts</name><value>localhost|*.localhost|127.0.0.1|h|*.h</value></property>
<property><name>http.nonProxyHosts</name><value>localhost|*.localhost|127.0.0.1|h|*.h</value></property>