I'm trying to configure PLAIN authentification based on JPAM 1.1 and am going crazy since it doesnt work after x times checking my syntax and settings. When I start drill with cluster-id and zk-connect only, it works, but with both options of PLAIN authentification it fails. Since I started with pam4j and tried JPAM later on, I kept JPAM for this post. In general I don't have any preferences. I just want to get it done. I'm running Drill on CentOS in embedded mode.
I've done anything required due to the official documentation:
I downloaded JPAM 1.1, uncompressed it and put libjpam.so into a specific folder (/opt/pamfile/)
I've edited drill-env.sh with:
export DRILLBIT_JAVA_OPTS="-Djava.library.path=/opt/pamfile/"
I edited drill-override.conf with:
drill.exec: {
cluster-id: "drillbits1",
zk.connect: "local",
impersonation: {
enabled: true,
max_chained_user_hops: 3
},
security: {
auth.mechanisms: ["PLAIN"],
},
security.user.auth: {
enabled: true,
packages += "org.apache.drill.exec.rpc.user.security",
impl: "pam",
pam_profiles: [ "sudo", "login" ]
}
}
It throws the subsequent error:
Error: Failure in starting embedded Drillbit: org.apache.drill.exec.exception.DrillbitStartupException: Problem in finding the native library of JPAM (Pluggable Authenticator Module API). Make sure to set Drillbit JVM option 'java.library.path' to point to the directory where the native JPAM exists.:no jpam in java.library.path (state=,code=0)
I've run that *.sh file by hand to make sure that the necessary path is exported since I don't know if Drill is expecting that. The path to libjpam should be know known. I've started Sqlline with sudo et cetera. No chance. Documentation doesn't help. I don't get it why it's so bad and imo incomplete. Sadly there is 0 explanation how to troubleshoot or configure basic user authentification in detail.
Or do I have to do something which is not told but expected? Are there any Prerequsites concerning PLAIN authentification which aren't mentioned by Apache Drill itself?
Try change:
export DRILLBIT_JAVA_OPTS="-Djava.library.path=/opt/pamfile/"
to:
export DRILL_JAVA_OPTS="$DRILL_JAVA_OPTS -Djava.library.path=/opt/pamfile/"
It works for me.
Related
i updated a project from TYPO3 7.6 to ^8 by following the official guide. latest steps were the composer update. i removed extensions/packages not compatible with ^8 and updated the ones available for ^8. im able to reach the install tool, the TYPO3 admin backend and the frontend (with errors).
so i ended up at the step were i should use the upgrade wizards provided by the install tool. i completed a few wizards without any issues but then faces a pretty one - first i tried to run DatabaseRowsUpdateWizard within the install tool but that failed with a memory error - i tried the cli approach with
php -d memory_limit=-1 vendor/bin/typo3cms upgrade:wizard DatabaseRowsUpdateWizard
the processing worked but it ended up with following error:
[ Helhum\Typo3Console\Mvc\Cli\FailedSubProcessCommandException ]
#1485130941: Executing command "upgrade:subprocess" failed (exit code: "1")
thrown in file vendor/helhum/typo3-console/Classes/Install/Upgrade/UpgradeHandling.php
in line 284
the command initially failed is:
'/usr/bin/php7.2' 'vendor/bin/typo3cms' 'upgrade:subprocess' '--command' 'executeWizard' '--arguments' 'a:3:{i:0;s:24:"DatabaseRowsUpdateWizard";i:1;a:0:{}i:2;b:0;}'
and here is the subprocess exception:
[ Sub-process exception: TYPO3\CMS\Core\Resource\Exception\InvalidPathException ]
#1320286857: File ../disclaimer_de.html is not valid (".." and "//" is not allowed in path).
thrown in file typo3/sysext/core/Classes/Resource/Driver/AbstractHierarchicalFilesystemDriver.php
in line 71
im pretty much lost and dont know were to start to get this fixed - help is much appreciated
Issues like these usually stem from broken URLs in RTE fields as can be seen in the error output:
File ../disclaimer_de.html is not valid (".." and "//" is not allowed in path)
In this case you should manually prepare the database and run SQL statements which replace the broken/obsolete ../ prefix from all affected records. An example query:
UPDATE tt_content
SET bodytext = REPLACE(bodytext, 'href="../', 'href="')
WHERE bodytext LIKE '%href="../';
Notice that this query is very basic and can destroy your data, so make sure you run some SELECT statements first to make sure nothing breaks. Also keep a backup of your database at hand.
Sometime, custom or TER extension also have RTE such as tt_news where you might come across same issue. To fix that, you just need to run the same query with the according table.
I have gone through number of threads on stackoverflow and on other forums to find the answer but could not find relevant answer. People have applied different approaches but none has worked for me thus far.
I am using CI 3 on XAMPP and whenever I load database library in the model, I run into 500 Error.
Here is my CI database config info:
'hostname' => 'localhost',
'username' => 'my_user',
'password' => 'my_pass',
'database' => 'prod_db',
'dbdriver' => 'mysqli',
'dbprefix' => '',
'pconnect' => FALSE,
PHP ini db libraries are as below:
extension=php_bz2.dll
extension=php_curl.dll
extension=php_fileinfo.dll
;extension=php_ftp.dll
extension=php_gd2.dll
extension=php_gettext.dll
;extension=php_gmp.dll
;extension=php_intl.dll
;extension=php_imap.dll
;extension=php_interbase.dll
;extension=php_ldap.dll
extension=php_mbstring.dll
extension=php_exif.dll ; Must be after mbstring as it depends on it
extension=php_mysqli.dll
;extension=php_oci8_12c.dll ; Use with Oracle Database 12c Instant Client
;extension=php_openssl.dll
;extension=php_pdo_firebird.dll
extension=php_pdo_mysql.dll
;extension=php_pdo_oci.dll
;extension=php_pdo_odbc.dll
;extension=php_pdo_pgsql.dll
extension=php_pdo_sqlite.dll
;extension=php_pgsql.dll
;extension=php_shmop.dll
; The MIBS data available in the PHP distribution must be installed.
; See http://www.php.net/manual/en/snmp.installation.php
;extension=php_snmp.dll
My model code is as below:
class loginmodel extends CI_Model {
public function validate_login($username, $password) {
$this->load->database();
$var = 0;
return $var;
}
}
Whenever I remove $this->load->database(); from the model, my code runs and i am able to redirect to a "Login Failed" page. BUT, whenever I load my database library in autoload.php or load it in above model, code fails.
Autoload.php
$autoload['libraries'] = array('database');
Apache error logs showed below errors but I could not figure as why this was happening.
PHP Warning: PHP Startup: Unable to load dynamic library 'C:\\php\\ext\\php_mysqli.dll' - The specified module could not be found.\r\n in Unknown on line 0
PHP Warning: PHP Startup: Unable to load dynamic library 'C:\\php\\ext\\php_pdo_mysql.dll' - The specified module could not be found.\r\n in Unknown on line 0
Please advise.
EDIT:
I verified all config to be OK and as stated in the comments, I added environment variables to windows and verified through PHPInfo that mysqli and mysqlnd were loaded.
Despite getting all the config right, error still persisted and I did a clean install of CI to reproduce library load failure. This time CI returned an error that db access was denied.
I then realized that after migration, database user was not created in the new environment. So once I created the desired user and assigned it required privileges, I was able to run the code just fine.
Therefore, if anyone encounters such issue in future, below steps might help:
First and foremost, verify if your desired user can access the
database.
Modify your .htaccess to use your desired URL schemes only after
verifying that database connection is working
Then verify that absolute path is available in PHP.ini on XAMPP.
Plus, verify that PHP is added in the environment variables. My
Values on Windows 10 are as follows: Variable Name: PHP , Variable
Value: C:\xampp\php\ext
In CI, mysqli is selected as database driver
In PHP.ini mysqli extension is enabled. i.e. php_mysqli.dll
Echo PHPInfo to verify that mysqli and mysqlnd are available in your
installation.
If nothing works, do a clean install of CI on a separate directory and load database library after setting up your database configuration and before setting up .htaccess until you can reproduce the error.
Hope that error will be eliminated!
I am using neo4j enterprise 3.0.3 version for windows. Following the operations manual 3.0, I have installed the neo4j service with bin\neo4j install-service. But I can't start it with bin\neo4j start. It said
Invoke-Neo4j : Failed to start service 'Neo4j Graph Database - neo4j (neo4j)'.
And I can't start the neo4j service in windows serice either. Maybe anyone have encountered this case before?
I had the same problem: I am using neo4j community 3.1.2 for windows and installed the service with the neo4j.bat file without any problems.Then i wanted to start the service with neo4j.bat and got the same error as you
I found a solution that worked for me. My neo4j files were in a folder, where the path to the folder contained spaces (C:\Program Files\Neo4j) Then i moved the folder one level up (C:\Neo4j).
After that i could start the service without problems.
Maybe this solution helps.
I am running neo4j on windows and in my case the crux of the issue was that there was an incompatibility between the installed versions of Java (32-bit) v/s OS version. The biggest clue that led me to this is the following set of lines in neo4j-service.2018-08-03 log file
[2018-08-03 14:55:42] [info] [ 1432] Starting service...
[2018-08-03 14:55:42] [error] [ 1432] %1 is not a valid Win32 application.
[2018-08-03 14:55:42] [error] [ 1432] Failed creating java C:\JavaNew\bin\server\jvm.dll
[2018-08-03 14:55:42] [error] [ 1432] %1 is not a valid Win32 application.
[2018-08-03 14:55:42] [error] [ 1432] ServiceStart returned 1
There are a fair number of potential issues, and I have made an attempt to compile all the issues with this,
Windows services cannot deal with service names in folders that have spaces; especially if there is another folder with the same name as the one with spaces.
For example - C:\Program Files... will have issues if C:\Program\Something...
To work around this, I put Neo4j in root folder c:\Neo4j
Get-Java.ps1 (under ..\bin\Neo4j-Management folder)looks in the path variable for 'JAVA_HOME' (usually found in *nix environments). If it does not find it here, it keeps looking in registry, and finally throws up its hand!
To deal with this, I simply put in a path variable. For a good measure, I uninstalled Java and re-installed Java in the root folder under C:\JavaNew
In retrospect, this step is probably not on part of the problem, and hence can be ignored. But I am leaving it here for completeness sake.
Invoke-Neo4j.ps1 (also under ..\bin\Neo4j-Management folder) has code that determines if the OS is 32-bit (or 64-bit). Based on this it determines if it should run prunsrv-i386.exe (32-bit) or prunsrv-amd64.exe (64-bit).
This has to match the Java version installed.
Upon running java -XshowSettings:all, and inspecting the sun.arch.data.model value (32, in my case), I realized that my OS is 64 bit and the Java version is 32-bit.
To deal with this, I put in code (very klugey!). I am sure there are much better ways to get to the same outcome, but this is what I used.
switch ( (Get-WMIObject -Class Win32_Processor | Select-Object -First 1).Addresswidth ) {
32 { $PrunSrvName = 'prunsrv-i386.exe' } # 4 Bytes = 32bit
#64 { $PrunSrvName = 'prunsrv-amd64.exe' } # 8 Bytes = 64bit COMMENTED as a workaround!!!
64 { $PrunSrvName = 'prunsrv-i386.exe' } # 8 Bytes = 64bit
Now, uninstall the neo4j service, install it, and start the service.
Hope this works for you.
neo4j console
Posting for latest versions > 4.x
I had the same issue using neo4j start, Neo4j console is the right command I was looking for. It is a web-based graph that acts as an interactive tutorial.
i had the same problem , after the neo4j worked for few weeks it stoop working (without any change that i made)
i have set java_home uninstall and install and now it works
neo4j-enterprise-3.3.4
I was also having weired issue as there was no error but neo4J service did not start.
[xx#ss1 bin]$ ./neo4j console
[xx#ss1 bin]$ .
The problem was with the permission on Java directory and I tried
chmod -R 777 jdk_directory
and problem got solved.
#neo4j #neo4jnotstarting
I did all that is specified in the tutorial - Doxygen Plugin.
Here is the sonarqube-4.5.1/conf/sonar.propeties file doxygen entries:
# Doxygen
sonar.doxygen.generateDocumentation=enable
sonar.doxygen.deploymentPath=D:\Downloads\sonarqube-4.5.1\web
sonar.doxygen.deploymentUrl=http://localhost:9000/sonar/documentation
The output of the sonarqube runner:
16:07:16.265 INFO - ANALYSIS SUCCESSFUL
16:07:16.266 DEBUG - Post-jobs : org.sonar.plugins.doxygen.DoxygenPostJob#28bda649
16:07:16.266 INFO - Executing post-job class org.sonar.plugins.doxygen.DoxygenPostJob
16:07:16.271 INFO - === SUPPRESS PREVIOUS GENERATION ===
16:07:16.395 INFO - === DOXYGEN EXECUTION ===
16:07:16.396 INFO - ### Generating configuration ###
16:07:16.427 INFO - ### Generating documentation ###
Also, in the specified \web folder there is a documentation folder which seems to contain the correct doxygen documentation output.
Yet I keep getting this Documentation Generation is disabled. message in the SonarQube web interface:
UPDATE
This is what my sonar-project.properties file contains now ― using a unix-style path:
#Doxygen
sonar.doxygen.generateDocumentation=enable
sonar.doxygen.deploymentPath=/Downloads/sonarqube-4.5.1/web
sonar.doxygen.deploymentUrl=http://localhost:9000/sonar/documentation
The output remains the same, same issue.
What do I need to do in order to see the documentation in the web server interface?
This seems to be a server linkage problem, because the documentation is being generated correctly, at this location: /Downloads/sonarqube-4.5.1/web/documentation.
I have also found this content:
core,true,sonar-core-plugin-4.5.1.jar|9289fc1067c31372c0b020aa01163087
emailnotifications,true,sonar-email-notifications-plugin-4.5.1.jar|bb35818e4a655a3ba2cff2afc65a296b
findbugs,false,sonar-findbugs-plugin-2.4.jar|bb0bf263ef1e0d56f569878732060cc9
java,false,sonar-java-plugin-2.4.jar|a105d018165ddeb2c0f5074100768660
cpd,true,sonar-cpd-plugin-4.5.1.jar|e11ff5066c9e2308036838510d87a6fe
dbcleaner,true,sonar-dbcleaner-plugin-4.5.1.jar|a444b3b4571791e1cde146ffa5132ee4
design,true,sonar-design-plugin-4.5.1.jar|0c6476994a44904307cfa8b8a08bbddd
doxygen,false,sonar-doxygen-plugin-0.1.jar|d86e1ab81c3ac34e6b31aa1da28d7f72
l10nen,true,sonar-l10n-en-plugin-4.5.1.jar|c21d53f67901cf6df3da1b4dd48a441b
in sonarqube-4.5.1\web\deploy\plugins\index.txt.
It looks like doxygen has a false associated with it. If I try to edit it (to true) and restart the server nothing changes. The file is overwritten at by the sonar-runner.
sonar.doxygen.generateDocumentation is a project property, not a server property. You have to set it in your "sonar-project.properties" file if you run your analysis with the SonarQube Runner or in your pom.xml file if you run the analysis with Maven.
Here is how I solved this:
Stopped the sonar-qube server.
Replaced the old sonar-doxygen-plugin-0.1.jar, from /Downloads/sonarqube-4.5.1/extensions/plugins, with the updated doxygen plugin from here https://github.com/SonarCommunity/sonar-doxygen/releases/download/1.0/sonar-doxygen-plugin-1.0-SNAPSHOT.jar.
Commented out the old configuration entries for doxygen from the project sonar-project.properties file. And replaced them with the follwoing entries:
sonar.doxygen.url=http://localhost:8000/
sonar.doxygen.enable=true
Used a simple python script to post the documentation html on that server (http://localhost:8000/).
Restarted the sonar-qube server.
Run the sonar-runner.bat again.
The documentation is in its place now.
I'm trying to figure out "why" I'm getting an error message from the Joomla 3.X component Gcalendar (google calendar). The error message is below.
Error Unable to Connect to ssl://www.google.com:443. Error
#-912967449: Unable to find the socket transport "ssl" - did you forget to enable it when you configured PHP?
I have read several other threads on here and other sites but most outline 'how' to enable/install/etc... SSL. I've copied/pasted the info.php data into a google doc here. Everything dealing with SSL is labeled as 'on' or 'installed.
The server is not 'public' right now, it is only available from within the school district's network. Could this be the reason for the problem?
Any ideas anyone?
ssl://www.google.com:443
should be
https://www.google.com:443
I just had this error as well. In my case it was because I was working locally, not on the live site. Once I put it live, it worked fine. Just putting this here in case anyone else comes across the same thing.
Install OpenSSL module for php:
1. In the php.ini file,
add this line "extension = php_openssl.dll"
2.Make sure that the folder "ext" have this dll,
if not then add the desired version.
Установить для php модуль OpenSSL:
1)В файле php.ини,
добавь строку "extension=php_openssl.dll"
2) Убедись что в папке "ext" есть эта dll,
если нет то добавте необходимой версии.