I want to install cgal module on CentOS7(or CentOS6). it needs for pgrouting to use PostGIS.
I have been install cgal with CGAL Manual Installation. But I didn't installed. And tried to install with PGRouting Installation. But it also failed to install.
Please help me to install cgal library on CentOS7(or CentOS6).
I am 3 years late but it might help others.
The CGAL package is available from Springdale Linux (SDL) / PUIAS Linux.
You can add the puias.repo to /etc/yum.repo.d/puias.repo.
Alternatively, just add the puias_computational repo.
add the gpg keys
sudo curl -o /etc/pki/rpm-gpg/RPM-GPG-KEY-puias http://springdale.math.ias.edu/data/puias/7/x86_64/os/RPM-GPG-KEY-puias
sudo curl -o /etc/pki/rpm-gpg/RPM-GPG-KEY-springdale http://springdale.math.ias.edu/data/puias/7/x86_64/os/RPM-GPG-KEY-springdale
add the repo, i.e. create the file /etc/yum.repo.d/puiascomp.repo with content
[puias_computational]
name=PUIAS computational Base $releasever - $basearch
mirrorlist=http://puias.math.ias.edu/data/puias/computational/$releasever/$basearch/mirrorlist
#baseurl=http://puias.math.ias.edu/data/puias/computational/$releasever/$basearch
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-puias
now you should be able to install cgal
sudo yum update -y
sudo yum install CGAL.x86_64 CGAL-demos-source.x86_64 CGAL-debuginfo.x86_64
Note, always be sure you understand what the commands you run are doing, especially when the use sudo.
Related
I am attempting to install the latest PostGIS 3.0.x on CentOS 8, with no luck.
I don't think anyone is running PostGIS on RHEL 8 or CentOS 8, I can't understand why not. It does not seem possible to install.
I have successfully installed Postgres 12.0 by disabling the RHEL AppStream
Steps I took installing postgres 12 on CentOS 8:
1)
#dnf install https://download.postgresql.org/pub/repos/yum/reporpms/EL-8-x86_64/pgdg-redhat-repo-latest.noarch.rpm
2)
#dnf --disablerepo AppStream install postgresql12
#dnf --disablerepo AppStream install postgresql12-server
I am attempting now to install PostGIS.
#dnf list --available | grep postgis30
I see that postgis30_96 is the latest offered (as listed below):
postgis30_96.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-client.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-client-debuginfo.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-debuginfo.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-devel.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-docs.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-gui.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-gui-debuginfo.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-utils.x86_64 3.0.0alpha4-6.rhel8 pgdg96
When I try to install with the following command:
#dnf install postgis30_96
I get these errors:
Last metadata expiration check: 1:22:58 ago on Tue 15 Oct 2019 08:25:10 PM UTC.
Error:
Problem: cannot install the best candidate for the job
- nothing provides hdf5 needed by postgis30_96-3.0.0alpha4-6.rhel8.x86_64
- nothing provides xerces-c needed by postgis30_96-3.0.0alpha4-6.rhel8.x86_64
(try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages)
I look for xerces-c, and nothing is returned:
#dnf list --available | grep xerces-c
Where do I get xerces-c to install?
I look to see if hdf5 is available to install (dependency)
#dnf list --available | grep hdf5
and nothing is returned. How do I satisfy these dependencies, so that PostGIS will install?
I goto the hdf5 website, download the source and it's a BIG FAT MESS. The build/install instructions do not work - the code is out of sync with the install instructions.
I check the hdf5 website and find another set of build/install instructions, and they too are out of sync with the latest code base. I don't know which way is up with this project, if it's a zombie project out there on the web, seemingly alive, but nobody's home.
How do I get hdf5 easily onto my system and xerces-c so that nothing existing gets mucked up? I would prefer to install these through any somewhat sanctioned CentOS 8 package repo using dnf.
I can't log this issue on the PostGIS ticket tracking system. Logging a ticket there requires an OSGEO ID, and when I request a 'mantra' to get started, nothing is returned, no response,
OSGEO is yet another zombie project, nobody's home. https://www.osgeo.org/community/getting-started-osgeo/osgeo_userid/
Please respond only if you have actually done this yourself on a CentOS 8 machine or VM, while I appreciate suggestions, pointers or imaginations from others, it pollutes r/postgis reddit with misinformation, non-working solutions, and not only wastes my time with dead ends, but also the time of others.
Someone else inevitably comes along with the same problems and is misguided with these those that are well-intentioned, but provide incorrect or incomplete information.
I had the same problem and finally found the solution. I need postgis25 for postgresql10, so I typed this command
dnf --enablerepo=PowerTools install postgis25_10
The PowerTools repo has the packages from codeready-developer repo, from Redhat CodeReady Studio. It contains a lot of useful tools.
Cannot enable PowerTools for RHEL 8
https://access.redhat.com/discussions/5417621
Remarks: PowerTools is a CentOS repository. On RHEL 8 we have the CodeReady Builder repository!
I am now able to install PostGIS-3 for PostgreSQL-12 on RHEL-8.
Solution:
sudo subscription-manager repos --enable codeready-builder-for-rhel-8-x86_64-rpms
dnf install postgis30_12
Summing up the previous answers, these are the commands needed to install PostGIS-3 on CentOS-8:
dnf -y install https://download.postgresql.org/pub/repos/yum/reporpms/EL-8-x86_64/pgdg-redhat-repo-latest.noarch.rpm
dnf -qy module disable postgresql
yum -y install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
dnf --enablerepo=PowerTools install postgresql12-server postgresql12-contrib postgis30_12
Many of the answers were helpful. To sum up the steps I had to take and errors in the instructions at https://people.planetpostgresql.org/devrim/index.php?/archives/107-Installing-PostGIS-3.1-and-PostgreSQL-13-on-CentOS-8.html
As mentioned by Marcelo, for RHEL use code-ready, not powertools.
As mentioned in this thread, don't mix packages. Run dnf -y install https://download.postgresql.org/pub/repos/yum/reporpms/EL-8-x86_64/pgdg-redhat-repo-latest.noarch.rpm
to get the pgdg repo before installing postgres. Then run dnf -qy module disable postgresql if needed then install postgres like sudo dnf install -y postgresql13-server
The command to install epel-repo listed here may not work. Try sudo dnf install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
Get the name of the latest postgis release with this command. sudo dnf list --available | grep postgis3 As mentioned by Nick, the second two digits are your postgres version.
Install postgis sudo dnf -y install postgis3x_xx I repeat, the second two digits are your postgres version.
So, in summary, to install postgres and postgis on my rhel8 sytstem, I ran these commands in this order.
sudo dnf -qy module disable postgresql
sudo dnf -y install https://download.postgresql.org/pub/repos/yum/reporpms/EL-8-x86_64/pgdg-redhat-repo-latest.noarch.rpm
sudo dnf install -y postgresql13-server
sudo /usr/pgsql-13/bin/postgresql-13-setup initdb
sudo systemctl enable postgresql-13
sudo systemctl start postgresql-13
sudo dnf install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
sudo subscription-manager repos --enable codeready-builder-for-rhel-8-x86_64-rpms
sudo dnf -y install postgis31_13
The postgis30_96 packages are for Postgres 9.6. You need postgis30_12 for Postgres 12.
These packages are definitely in the repo, so if your dnf list isn't seeing them, it may be an instance of a known issue in which "yum/dnf refuse to find/install many packages from PGDG repository on RHEL8".
As a workaround, the Postgres Yum Howto recommends this installation procedure:
dnf -y install https://download.postgresql.org/pub/repos/yum/reporpms/EL-8-x86_64/pgdg-redhat-repo-latest.noarch.rpm
dnf -qy module disable postgresql
dnf install postgresql11-server postgresql11-contrib
Percona Postgresql 13 And Postgis 3.0
https://www.percona.com/doc/percona-repo-config/index.html
dnf remove postgresql
sudo dnf install https://repo.percona.com/yum/percona-release-latest.noarch.rpm
sudo percona-release setup ppg-13
You can refer here:
https://www.percona.com/doc/postgresql/LATEST/installing.html#using-the-rpm-format
sudo dnf module disable postgresql
sudo dnf install percona-postgresql13-server
sudo dnf install percona-pg_repack13
sudo dnf install percona-pgaudit
sudo dnf install percona-pgbackrest
sudo dnf install percona-patroni
sudo dnf install percona-pg-stat-monitor13
sudo dnf install percona-postgresql13-contrib
/usr/pgsql-13/bin/postgresql-13-setup initdb
sudo systemctl start postgresql-13
PostGIS
dnf -y config-manager --set-enabled PowerTools
dnf install -y postgis30_13 postgis30_13-client
What helped me in CentOS container (as a root):
yum -y install dnf-plugins-core && yum config-manager --set-enabled powertools
Installing dnf-plugins-core and enabling powertools.
I'm Using CentOS 7 and trying to install IP messenger in it but not able to install it. Can anyone help me in installing any IP messenger. Any kind of help would be appreciated. Thanks.
You can also compile iptux from source:
Install dependencies
Ubuntu/Debian
sudo apt-get install git libgtk2.0-dev libgconf2-dev g++ make autoconf libtool automake
Fedora/Cent OS
sudo yum install git gtk2-devel GConf2-devel gcc-c++ make autoconf libtool automake
Clone the directory from github
git clone git://github.com/iptux-src/iptux.git
Compile it and install
cd iptux
./configure
make
sudo make install
Execute the program
iptux
iptux seems quite portable. You could compile it from sources and install it locally like for example this tutorial tells you.
Alternatively, you could manually download a packaged version of iptux in rpm format and install it using the CentOS package manager.
rpm -i iptux-0.5.1-alt1_13.i586.rpm OR rpm -i iptux-0.5.1-alt1_13.x86_64.rpm
Postgres DB is already installed. I'm not using system perl I have installed another perl in "/srv/data203806/Migration/CPAN/localperl/bin". When I'm trying to install, It is asking for PATH TO pg_config:
[root1#frmrszvwb023 bin]# ./cpan install DBD::Pg
Reading '/root/.cpan/Metadata'
Database was generated on Fri, 07 Mar 2014 03:53:02 GMT
Running install for module 'DBD::Pg'
Running make for T/TU/TURNSTEP/DBD-Pg-3.0.0.tar.gz
Checksum for /root/.cpan/sources/authors/id/T/TU/TURNSTEP/DBD-Pg-3.0.0.tar.gz ok
CPAN.pm: Building T/TU/TURNSTEP/DBD-Pg-3.0.0.tar.gz
Configuring DBD::Pg 3.0.0
Path to pg_config?
No POSTGRES_HOME defined, cannot find automatically
Warning: No success on command[/srv/data203806/MUXmh-Migration/CPAN/localperl/bin/perl Makefile.PL]
'YAML' not installed, will not store persistent state
TURNSTEP/DBD-Pg-3.0.0.tar.gz
/srv/data203806/MUXmh-Migration/CPAN/localperl/bin/perl Makefile.PL -- NOT OK
Running make test
Make had some problems, won't test
Running make install
Make had some problems, won't install
Could not read metadata file. Falling back to other methods to determine prerequisites
Please help me to install DBD::Pg? How to get path to pg_config?
Just ran into this issue, and on Ubuntu 16.04 Xenial the package you're looking for is:
apt-get install libdbd-pg-perl
You have to install libpq-dev, e.g. on Ubuntu:
sudo apt-get install libpq-dev
On CentOS/RH you can fix it by installing perl-DBD-Pg package with yum
sudo yum install perl-DBD-Pg
From the README:
INSTALLATION:
Before installing, please use the "cpansign -v" program to
cryptographically verify that your copy of DBD::Pg is complete and
valid. The program "cpansign" is part of Module::Signature, available
from CPAN.
By default Makefile.PL uses App::Info to find the location of the
PostgreSQL library and include directories. However, if you want to
control it yourself, define the environment variables POSTGRES_INCLUDE
and POSTGRES_LIB, or define just POSTGRES_HOME. Note that if you have
compiled PostgreSQL with SSL support, you must define the POSTGRES_LIB
environment variable and add "-lssl" and "-lcrypto" to it, like this:
export POSTGRES_LIB="/usr/local/pgsql/lib -lssl -lcrypto"
The usual steps to install DBD::Pg:
perl Makefile.PL
make
make test
make install
Do steps 1 to 2 as a normal user, not as root!
If the script cannot find the pg_config information itself, it will
ask you for the path to it. Enter the complete path to the pg_config
file here, including the name of the file itself.
If you want to use a module, read the documentation.
Before installing perl module, you must install client for accessing Postgres DB. I just install server and header files:
sudo apt-get install postgresql
sudo apt-get install libpq-dev
You can try:
locate pg_config
This will show something like:
/usr/pgsql-10/bin/pg_config
/usr/pgsql-10/include/ecpg_config.h
/usr/pgsql-10/include/ecpg_config_x86_64.h
Then run:
POSTGRES_HOME=/usr/pgsql-10 ./cpan install DBD::Pg
UPD
If you still encounter issues with pg_config, you may need to add it to your PATH, e.g.:
export PATH=$PATH:/usr/pgsql-x.x/bin
where x.x is your version, such as /usr/pgsql-9.2./bin.
Fedora 29, plenv, perl v5.18.0
Once I got plenv working, I was able to install DBD::Pg with cpanm using these commands:
sudo dnf install postgresql postgresql-devel
cpanm --quiet --notest DBD::Pg
For ArchLinux (or any Distro using Pacman):
pacman -S perl-dbd-pg
For my Ubuntu 22 worked this:
sudo apt install build-essential
sudo apt install cpanminus
sudo apt-get install -y postgresql-server-dev-all
sudo cpanm DBD::Pg
I've followed the tutorial on SE as well as trying the extra steps from Hertaville and bootc but I still get the error that prompted the original SE question. I'm stumped.
I get five steps into the process before I get the error:
sudo apt-get install git rsync cmake lib32z1 lib32ncurses5 lib32bz2-1.0
git clone git://github.com/raspberrypi/tools.git
export PATH=$PATH:$HOME/raspberrypi/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/bin
. ~/.bashrc
arm-linux-gnueabihf-gcc -v
Error:
arm-linux-gnueabihf-gcc: error while loading shared libraries:
libstdc++.so.6: cannot open shared object file: No such file or directory
libstdc++.so.6 is present in all three directory trees mentioned in the tutorials as well as ./lib/x86_64-linux-gnu/libstdc++.so.6, but adding the relevant one to the path doesn't help (see below). I suspect there's a library path not being set, but I have no idea what that is.
I'm doing this in a virtual machine running Ubuntu 13.10 with netbeans and other tools, plus a LAMP stack installed. netbeans will build and run C/C++ executables just fine (and obviously IO can do the same from the command line).
Other things I've tried without success
export PATH=$PATH:$HOME/raspberrypi/tools/arm-bcm2708/gcc-linaro-arm-linux-gnueabihf-raspbian/arm-linux-gnueabihf/lib
Hertaville suggest adding 32 bit architecture:
sudo dpkg --add-architecture i386
sudo apt-get update
sudo apt-get install libc6-i386 lib32stdc++6 zlib1g:i386
And the "build-essential" package:
sudo apt-get install build-essential git
Which also didn't help. I've also rebooted just in case.
As expected the answer is trivial - install lib32stdc++6
The first line above should read:
sudo apt-get install libc6-i386 lib32z1 lib32stdc++6
In Centos 6.4,when configure Emacs,it shows:
configure: error: The required function `tputs' was not found in any library.
The following libraries were tried (in order):
libtinfo, libncurses, libterminfo, libtermcap, libcurses
Please try installing whichever of these libraries is most appropriate
for your system, together with its header files.
For example, a libncurses-dev(el) or similar package.
How to fix it,what's the problem in it.
sudo yum install ncurses-devel
then ./configure again
Try to install libncurses-dev with
bash
apt-get install libncurses-dev
I'm on a Debian Wheezy derived distribution (CrunchBang)
Trying to install Emacs 24.5.1
Had to install libncurses5-dev, then run ./configure
$ sudo apt-get install ncurses-devel
...
E: Unable to locate package ncurses-devel
$ sudo apt-get install libncurses5-dev