I followed the directions here, and did everything according to letter except instead of swift-3.0.1-RELEASE-ubuntu14.04.tar.gz, I got swift-3.1.1-RELEASE-ubuntu14.04.tar.gz. I can do everything except run my program.
When I try to run, I get:
./helloworld
error while loading shared libraries: libicuuc.so.52: cannot open
shared object file: No such file or directory
I tried sudo apt-get install libicu52
But I get
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package libicu52
How can I fix this?
Related
I have a Raspberry Pi 4 running Raspian Lite Version 10. So I far I have installed git, Apache, php, and phpmyadmin on it.
Now while trying to install python3-venv package (or any package for that matter) using sudo apt-get install python3-venv I am getting following error -
Selecting previously unselected package python-pip-whl. dpkg: unrecoverable fatal error, aborting: files list file for package 'git' contains empty filename E: Sub-process /usr/bin/dpkg returned an error code (2)
I am not able to install any package on my system due to this error. So far I tried deleting the git folder from /usr/bin/dpkg but it has not seemed to help.
I was going to use Swift/t and normally I started to with HELLO WORLD code from the gallery. Unfortunately, I encountered compiling error as follow:
zsh: error while loading shared libraries: libtinfo.so.5: cannot open shared object file: No such file or directory
May you please provide me some hints that may help me to resolve the issue.
This kind of errors (bash/zsh: error while loading shared libraries: ...) appear when you don't have a library installed on your system.
In your case, your missing library is libtinfo, on its version 5. You should be able to search and install it throught your system's package manager.
Just as an example, in Ubuntu you can install it by:
sudo apt install libtinfo5
I tried to install mariadb via termux in my Android phone, it actually downloaded it but was unable to install. It gave me an error message which goes thus:
E: This installation run will require temporarily removing the essential package libandroid-support:arm due to a Conflicts/Pre-Depends loop. This is often bad, but if you really want to do it, activate the APT::Force-LoopBreak option.
E: Internal Error, Could not early remove libandroid-support:arm (2)
What can I do to fix it?
Try:
rm -rf $PREFIX
then restart termux.
Note that you will have to install all packages again. Maybe store the output of apt list beforehand.
I have a really strange issue with the behavior of pip in a virtualenv.
I have set
export PIP_REQUIRE_VIRTUALENV=true
export PIP_DOWNLOAD_CACHE=$HOME/.pip/cache
export VIRTUALENV_DISTRIBUTE=true
Now, when I'm in my virtualenv and want to install my dependencies:
pip install -r requirements/_base.txt
(for testing purposes, requirements/_base.txt only contains:)
Django==1.5
Anyway, when I try to install it, I only get:
Downloading/unpacking Django==1.5 (from -r requirements/_base.txt (line 1))
Running setup.py egg_info for package Django
warning: no previously-included files matching '__pycache__' found under directory '*'
warning: no previously-included files matching '*.py[co]' found under directory '*'
And after that, Django is not installed.
Here comes the strange part: When I install Django manually with
pip install Django==1.5
it's working perfectly (though the same two warnings appear):
Downloading/unpacking Django==1.5
Running setup.py egg_info for package Django
warning: no previously-included files matching '__pycache__' found under directory '*'
warning: no previously-included files matching '*.py[co]' found under directory '*'
Installing collected packages: Django
Running setup.py install for Django
changing mode of build/scripts-2.7/django-admin.py from 644 to 755
warning: no previously-included files matching '__pycache__' found under directory '*'
warning: no previously-included files matching '*.py[co]' found under directory '*'
changing mode of /usr/local/share/python/django-admin.py to 755
Successfully installed Django
Cleaning up...
I faced a similar problem and realized that removing the version requirement solved the problem. Don't know why though...
I figured out why this was happening to me, which may also solve the problem for others who see this page. For me, the problem was that I had a requirement that can not install automatically via pip. The pip freeze exported the package name and version but, for whatever reason, pip cannot install that package directly in a requirements install. I have to instead install it manually from a zip file.
The problem you might be experiencing, then, is that you have a requirement which cannot be installed by pip's requirements installer. Check your output log for red text, errors, that sort of thing.
I figured this out using this post:
pip fails to install packages from requirements.txt
My ultimate goal is to run a twiki website for my research group.
I have space on RedHat server that is running Apache, etc., but upon which I do not have root access. Since I cannot install perl modules with the current permissions, I've decided to manually install a local version of perl. Got that working no problem. The following modules are required to get twiki to work:
FreezeThaw - http://search.cpan.org/~ilyaz/FreezeThaw
CGI::Session - http://search.cpan.org/~markstos/CGI-Session
Error - http://search.cpan.org/~shlomif/Error
GD - http://search.cpan.org/~lds/GD
HTML::Tree - http://search.cpan.org/~petek/HTML-Tree
Time-modules - http://search.cpan.org/~muir/Time-modules
I have installed FreezeThaw, CGI, Error, and it fails on GD with the following error:
UNRECOVERABLE ERROR Could not find gdlib-config in the search path.
Please install libgd 2.0.28 or higher. If you want to try to
compile anyway, please rerun this script with the option --ignore_missing_gd.
In searching for how to get around this newest obstacle, I found a previous SO question: How to install GD library with Strawberry Perl asked about installing this and the top answer suggested manually compiling gdlib. You'll note, however, that that link is broken. The base site: http://www.libgd.org/ is basically down saying to go to the project's bitbucket page.
So I got the tarball from that page and am trying to install it. The following problems occur when I follow the instructions included. README.TXT says: "If the sources have been fetched from CVS, run bootstrap.sh [options]."
Running bootstrap.sh yields:
configure.ac:64: warning: macro `AM_ICONV' not found in library
configure.ac:10: required directory ./config does not exist cp: cannot
create regular file `config/config.guess': No such file or directory
configure.ac:11: installing `config/config.guess' configure.ac:11:
error while copying cp: cannot create regular file
`config/config.sub': No such file or directory configure.ac:11:
installing `config/config.sub' configure.ac:11: error while
copying cp: cannot create regular file `config/install-sh': No such
file or directory configure.ac:28: installing `config/install-sh'
configure.ac:28: error while copying cp: cannot create regular
file `config/missing': No such file or directory configure.ac:28:
installing `config/missing' configure.ac:28: error while copying
configure.ac:577: required file `config/Makefile.in' not found
configure.ac:577: required file `config/gdlib-config.in' not found
configure.ac:577: required file `test/Makefile.in' not found
Makefile.am:14: Libtool library used but `LIBTOOL' is undefined
Makefile.am:14: The usual way to define `LIBTOOL' is to add
AC_PROG_LIBTOOL' Makefile.am:14: to configure.ac' and run
aclocal' and autoconf' again. Makefile.am:14: If `AC_PROG_LIBTOOL'
is in `configure.ac', make sure Makefile.am:14: its definition is in
aclocal's search path. cp: cannot create regular file
`config/depcomp': No such file or directory Makefile.am: installing
`config/depcomp' Makefile.am: error while copying Failed
And it says I should also install the following 3rd party libraries:
zlib, available from http://www.gzip.org/zlib/
Data compression library
libpng, available from http://www.libpng.org/pub/png/
Portable Network Graphics library; requires zlib
FreeType 2.x, available from http://www.freetype.org/
Free, high-quality, and portable font engine
JPEG library, available from http://www.ijg.org/
Portable JPEG compression/decompression library
XPM, available from http://koala.ilog.fr/lehors/xpm.html
X Pixmap library
Which I am ignoring for now.
Switching to the generic instructions it says follow the advice in the INSTALL file; which says: "cd to the directory containing the package's source code and type ./configure to configure the package for your system." Which flat does not work: I've cd'ed into every directory of the tarball and running that command does nothing.
So, trying to install twiki required me to install perl, which required me to install the perl modules: FreezeThaw, CGI, Error, HTML, Time-modules, and GD -- which itself required me to install gdlib -- which further suggested I install zlib, libpng, FreeType 2.x, JPEG library, and XPM. And of course, I'm stuck at the installing gdlib stage.
My question is: what other process can possibly demean humanity to such a level? I cannot fathom the depths of cruelty that lay ahead of me as I dive ever deeper into this misery onion. Should I just end it all? Can meaning be brought from this madness? Will the sun come up tomorrow, and if so, does it even matter?
But seriously, any suggestions on what to do differently/better would be much appreciated -- I can't remember what a child's laughter sounds like anymore.
Install the package gd-devel, it contains /usr/bin/gdlib-config.
This should work:
sudo apt-get -y install libgd2-xpm-dev build-essential