On Ubuntu 20.04, I had two operational copies of opus-tools 0.1.10-1 (amd64) and ffmpeg 7:4.2.4-1ubuntu0.1 (amd64). I installed lame 3.100-3 (amd64) and opus-tools / ffmpeg stopped working with the following errors:
ffmpeg: symbol lookup error: /lib/x86_64-linux-gnu/libavcodec.so.58: undefined symbol: opus_multistream_surround_encoder_create
opusenc: symbol lookup error: opusenc: undefined symbol: opus_multistream_surround_encoder_create
I uninstalled lame and got the same messages. Then I used the --auto-remove option to remove any dependency and faced the same issues. After that, I uninstalled and reinstalled opus-tools and ffmpeg and that didn't help. Almost giving up, I followed this FFmpeg-user thread and executed ldconfig. No luck either.
Finally, I tried building and installing opus-tools from the sources but got the following message:
configure: error: Package requirements (ogg >= 1.3) were not met:
No package 'ogg' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables OGG_CFLAGS
and OGG_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
Thanks in advance for any help.
Do a backup of your files and reinstall ubuntu 20.04.
I am running a toolkit named RNA Framework that requires ViennaRNA to be installed.
I have installed the ViennaRNA 2.4.14 to run a function named rf-fold, However, I constantly receive this error:
[!] Error: ViennaRNA package's Perl module RNA.pm is required.
Please ensure that `ViennaRNA package v2.2.0` (or greater) is installed and try again
When I check the missing RNA.pm module, I can see it is in this path:
/home/user/ViennaRNA/lib/site_perl/5.28.0/
when I check which Perl I am using (type: which Perl) it gives me:
/home/user/perl5/perlbrew/perls/perl-5.28.0/bin/perl
I tried different ways to install the ViennaRNA, including conda install -c bioconda viennarna, compile and make install from ViennaRNA-2.4.14.tar.gz file from the official website. But I cannot get over this error.
I saw a similar issue here and there is a solution (https://www.perlmonks.org/?node_id=1052814), but I don't fully understand the content. Thanks in advance for any help and sorry if it is a basic question!
I think the RNA.pm come with the package, when you download ViennaRNA-2.4.14.tar.gz and install following this link.
So I found my RNA.pm is in the directory:
/share/apps/ViennaRNA-2.1.7/compile-install/lib/site_perl/5.14.2/x86_64-linux-thread-multi/RNA.pm
And I modified the PERL5LIB environment variable by :
export PERL5LIB=/share/apps/ViennaRNA-2.1.7/compile-install/lib/
Problem solved!
I followed the directions here, and did everything according to letter except instead of swift-3.0.1-RELEASE-ubuntu14.04.tar.gz, I got swift-3.1.1-RELEASE-ubuntu14.04.tar.gz. I can do everything except run my program.
When I try to run, I get:
./helloworld
error while loading shared libraries: libicuuc.so.52: cannot open
shared object file: No such file or directory
I tried sudo apt-get install libicu52
But I get
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package libicu52
How can I fix this?
I installed libreoffice5.1.3 on my VPS centos 7
when i try to launch libreoffice it is showing following error
libreoffice5.3 javaldx: Could not find a Java Runtime Environment! Warning: failed to read path from javaldx /opt/libreoffice5.3/program/soffice.bin: error while loading shared libraries: libdbus-glib-1.so.2: cannot open shared object file: No such file
How can i resolve it
Thank you in advance
Maybe is later but try to install this package:
yum install libdbus-glib-1.so.2
So after require this packages:
libdbus-glib-1.so.2
libcairo.so.2
libcups.so.2libSM.so.6
If it is, install all
My ultimate goal is to run a twiki website for my research group.
I have space on RedHat server that is running Apache, etc., but upon which I do not have root access. Since I cannot install perl modules with the current permissions, I've decided to manually install a local version of perl. Got that working no problem. The following modules are required to get twiki to work:
FreezeThaw - http://search.cpan.org/~ilyaz/FreezeThaw
CGI::Session - http://search.cpan.org/~markstos/CGI-Session
Error - http://search.cpan.org/~shlomif/Error
GD - http://search.cpan.org/~lds/GD
HTML::Tree - http://search.cpan.org/~petek/HTML-Tree
Time-modules - http://search.cpan.org/~muir/Time-modules
I have installed FreezeThaw, CGI, Error, and it fails on GD with the following error:
UNRECOVERABLE ERROR Could not find gdlib-config in the search path.
Please install libgd 2.0.28 or higher. If you want to try to
compile anyway, please rerun this script with the option --ignore_missing_gd.
In searching for how to get around this newest obstacle, I found a previous SO question: How to install GD library with Strawberry Perl asked about installing this and the top answer suggested manually compiling gdlib. You'll note, however, that that link is broken. The base site: http://www.libgd.org/ is basically down saying to go to the project's bitbucket page.
So I got the tarball from that page and am trying to install it. The following problems occur when I follow the instructions included. README.TXT says: "If the sources have been fetched from CVS, run bootstrap.sh [options]."
Running bootstrap.sh yields:
configure.ac:64: warning: macro `AM_ICONV' not found in library
configure.ac:10: required directory ./config does not exist cp: cannot
create regular file `config/config.guess': No such file or directory
configure.ac:11: installing `config/config.guess' configure.ac:11:
error while copying cp: cannot create regular file
`config/config.sub': No such file or directory configure.ac:11:
installing `config/config.sub' configure.ac:11: error while
copying cp: cannot create regular file `config/install-sh': No such
file or directory configure.ac:28: installing `config/install-sh'
configure.ac:28: error while copying cp: cannot create regular
file `config/missing': No such file or directory configure.ac:28:
installing `config/missing' configure.ac:28: error while copying
configure.ac:577: required file `config/Makefile.in' not found
configure.ac:577: required file `config/gdlib-config.in' not found
configure.ac:577: required file `test/Makefile.in' not found
Makefile.am:14: Libtool library used but `LIBTOOL' is undefined
Makefile.am:14: The usual way to define `LIBTOOL' is to add
AC_PROG_LIBTOOL' Makefile.am:14: to configure.ac' and run
aclocal' and autoconf' again. Makefile.am:14: If `AC_PROG_LIBTOOL'
is in `configure.ac', make sure Makefile.am:14: its definition is in
aclocal's search path. cp: cannot create regular file
`config/depcomp': No such file or directory Makefile.am: installing
`config/depcomp' Makefile.am: error while copying Failed
And it says I should also install the following 3rd party libraries:
zlib, available from http://www.gzip.org/zlib/
Data compression library
libpng, available from http://www.libpng.org/pub/png/
Portable Network Graphics library; requires zlib
FreeType 2.x, available from http://www.freetype.org/
Free, high-quality, and portable font engine
JPEG library, available from http://www.ijg.org/
Portable JPEG compression/decompression library
XPM, available from http://koala.ilog.fr/lehors/xpm.html
X Pixmap library
Which I am ignoring for now.
Switching to the generic instructions it says follow the advice in the INSTALL file; which says: "cd to the directory containing the package's source code and type ./configure to configure the package for your system." Which flat does not work: I've cd'ed into every directory of the tarball and running that command does nothing.
So, trying to install twiki required me to install perl, which required me to install the perl modules: FreezeThaw, CGI, Error, HTML, Time-modules, and GD -- which itself required me to install gdlib -- which further suggested I install zlib, libpng, FreeType 2.x, JPEG library, and XPM. And of course, I'm stuck at the installing gdlib stage.
My question is: what other process can possibly demean humanity to such a level? I cannot fathom the depths of cruelty that lay ahead of me as I dive ever deeper into this misery onion. Should I just end it all? Can meaning be brought from this madness? Will the sun come up tomorrow, and if so, does it even matter?
But seriously, any suggestions on what to do differently/better would be much appreciated -- I can't remember what a child's laughter sounds like anymore.
Install the package gd-devel, it contains /usr/bin/gdlib-config.
This should work:
sudo apt-get -y install libgd2-xpm-dev build-essential