I have windows 10 and use excel 16. Even if in project mode a form is light blue when I execute the macro all forms I made (both new ones and those made in excel 2007) are visualized with the title not colored, blank: does somebody know why?
../users/8032576/francesco
excel forms appear with blank color
To make relevant my precedent question asked May 18 maybe I can add some information to clarify the problem. The form in project time looks like the image at the right while at execution time it looks like the one at left
[enter image description here][1] project
[enter image description here][2] execution
My computer graphic chipset has the following features:
Chipset grafico - AMD Radeon(TM) R7 M440, Tipo di bus - PCI Express 3.0, Versione BIOS - 015.049.000.012
Capacità della memoria - 4096 MB, Tipo di memoria - DDR3, Clock memoria - 900 MHz, Clock principale - 1021 MHz, Larghezza di banda totale della memoria - 14 GByte/s
Maybe my request is more complete.
Francesco
I found the answer to my own question thanks to Norman David Jone who suggested me: https://support.microsoft.com/it-it/help/17144/windows-10-change-desktop-background
However I would thank you for your hospitality.
Francesco
Related
I'm quite new to radar, but I'm stuck with the disassembler:
Loaded a binary file using 6502 architecture and ran the disassembler gave me some nice, disassembled output, like:
0x0000cc00 78 sei
0x0000cc01 a2ff ldx #0xff
0x0000cc03 9a txs
0x0000cc04 a9ff lda #0xff
0x0000cc06 8d0430 sta 0x3004
I'm trying to set some "aliases" for addresses being used in the code:
fs symbols
f IOPORT = 0x3004
The disassembler still shows sta 0x3004, but I'd expect sta IOPORT, as written in the flag before, but only the color of the instruction changed...
I've scrolled to the asm.* settings but can't find something to turn this feature "on"...
Somebody have a clue?
Flashing a coral dev board per the getting started guide results in the the error Wrong image format for "source" command. This error is what is displayed in the serial console when the SD card is inserted in the board and the board is powered up - full output below. I didn't find any documentation for this problem so I am posting it here in case anyone else has this issue.
U-Boot SPL 2019.04.1 (Apr 29 2020 - 18:40:05 +0000)
power_bd71837_init
Board id: 2
DDRINFO: start DRAM init
DDRINFO:ddrphy calibration done
DDRINFO: ddrmix config done
Normal Boot
Trying to boot from MMC2
hdr read sector 300, count=1
U-Boot 2019.04.1 (Apr 29 2020 - 18:40:05 +0000), Build: jenkins-enterprise.uboot-imx-1
CPU: Freescale i.MX8MQ rev2.0 1500 MHz (running at 1000 MHz)
CPU: Commercial temperature grade (0C to 95C) at 33C
Reset cause: POR
Model: Freescale i.MX8MQ Phanbell
DRAM: 1 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
BuildInfo:
- ATF
- U-Boot 2019.04.1
flash target is MMC:0
Net:
Error: ethernet#30be0000 address not set.
Error: ethernet#30be0000 address not set.
eth-1: ethernet#30be0000
Fastboot: Normal
Normal Boot
Hit any key to stop autoboot: 0
** No partition table - mmc 1 **
## Executing script at 40480000
Wrong image format for "source" command
## Starting auxiliary core at 0x00000000 ...
u-boot=>
This error results from a bad SD card, or perhaps one that has already been used (formatted) for other uses. I was able to bypass this error and successfully install the OS by burning the image per the the getting started guide on a brand new SD card (I used a Samsung 128GB Pro Endurance card). I used balenaEtcher on a mac, which burns the image in just a few minutes.
For work I've had to provision dozens of these and they are super finicky about sd cards. I've bought 4 brand new completely identical (same brand, size, etc.) sd cards and burn them all identically. 1 will work on one board but not another, another will work in the 2nd but not the first, etc. So the only advice I have is "keep trying".
Thanks for the answers from Oliver and j2abro. I just dug the Coral Dev Board out of my project drawer and started trying to get it running.
First of all, make sure you read the directions and set the DIP switches properly (this dip, me, didn't do that, at first). I finally got it to work, but Oliver's answer seems to match my experience (Dev Board is finicky about SD Cards). Here's the cards used and result. All flashed with BalenaEtcher on a MacBook Pro (M1 2020, Monterrey 12.6):
SanDisk UltraPlus 256GB (multiple FAILS: didn't set DIPs correctly. derp!)
SanDisk UltraPlus 32GB #1 (FAILED with DIPs correctly set: same result as OP)
SanDisk UltraPlus 32GB #2 (FAILED with DIPs correctly set: same result as OP)
SanDisk UltraPlus 256GB (SUCCESS: set DIPs correctly) same card as #1
All these cards were brand new, right out of the retail packaging; nothing else was written to them before the Coral Dev Board image.
Theory: I tried the 32GB cards thinking that this board might have a problem with exFAT (above 32GB) storage formatting, similar to the Raspberry Pi boot limitation. However, given my and j2abro's success with larger SD Cards, I'd recommend trying a larger SD Card (more than 32GB) rather than the typical 32GB or less you'd use for a Pi. Seems like the Dev Board likes exFAT formatting better?
Tip: I strongly recommend connecting to the board using the Serial Console while setting up the board (link below), otherwise you'll be doing a lot of guessing as to what's going on with the setup and waste your time:
https://coral.ai/docs/dev-board/serial-console/
Here's what I saw (finally) in the Serial Console after the second reboot after a successful flash with the 256GB card:
...
[ 8.788556] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready
Mendel GNU/Linux (eagle) lime-jet ttymxc0
lime-jet login:
Hope this helps you get to a successful setup.
In Mendeley, how do I get citations in a Word document to upload to my library? I contacted Mendeley and they apparently don't have any feature like this, but they said they would "suggest it to their developers". In the mean time, is there a way around this? I have/inherited 160 citations and don't want to manually upload each one.
The citations in my word document look like this:
Baker, L. A., P. R. Kaufmann, A. T. Herlihy, and J. M. Eilers. 1990. Current Status of Surface Water Acid-Base Chemistry. NAPAP State-of-Science/Technology Report No. 9, National Acid Precipitation Assessment Program, Washington, DC.
Barker, J. L., and E. C. Witt. 1990. Effects of acidic precipitation on the water quality of streams in the Laurel Hill area, Somerset County, Pennsylvania, 1983-1986. Water Resources Investigations Report 89-4113.
Brunham, D.G. and J.H. Kellogg. 1989. The Vermont acid precipitation program long-term lake monitoring. Vermont Agency of Environmental Conservation. January 1989
Disclosure: I'm a software engineer at Mendeley working on reference management tools
I'm not aware of any public-facing tool built or maintained by Mendeley that would allow you to do that. This certainly looks like a feature that our product management team may want to consider and will let them know about it.
Having said that there might be a way to do this using some other tools in the meantime:
This post seems to describe a similar situation. One of the users mentions a tool called Citation Finder.
From what I can see it takes a bibliography (one entry per line) and export it into a RIS/BibTeX format (which you can then download):
Here's what the RIS file looks like:
TY - RPRT
DO - 10.2172/6371178
UR - http://dx.doi.org/10.2172/6371178
TI - Water Science and Technology Board annual report 1989
AU -
PY - 1990
DA - 1990/01/01
PB - Office of Scientific and Technical Information (OSTI)
ER -
TY - RPRT
DO - 10.3133/wri894113
UR - http://dx.doi.org/10.3133/wri894113
TI - Effects of acidic precipitation on the water quality of streams in the Laurel Hill area, Somerset County, Pennsylvania, 1983-86
PY - 1990
PB - US Geological Survey
ER -
TY - JOUR
DO - 10.1177/004728758001900132
UR - http://dx.doi.org/10.1177/004728758001900132
TI - Vermont Recreation Demand Survey: Summary Report. Vermont Agency of Environmental Conservation, Montpelier, Vermont 05602. No date. 29p
T2 - Journal of Travel Research
PY - 1980
DA - 1980/07
PB - SAGE Publications
SP - 32-33
IS - 1
VL - 19
SN - 0047-2875
SN - 1552-6763
ER -
Then go to File > Import ... > RIS - Research Information System (*.ris) and import the RIS file you just downloaded. You should see your references (or some of it at least).
I'm Looking for how to overclock RX470 / RX580 AMD grahpic card on CentOS7 or Ubuntu..
I just successed to modify fan attribute but, I couldn't do memory / core clock / voltage..
And I don't know how to show AMD graphic cards state on CentOs
RX series doesn't meet aticonfig config command so i don't what to do ..
these graphics are working on well , But I don't know what can i do to overclock these graphic cards...
I installed amdgpu-pro 17.30 driver on Centos7 and It works well..
Is there anybody who knows overclock AMDGPU-PRO RX* graphic card??
Plz Help me..
Thank you for reading !
Look if you can find /sys/class/drm/card0/device/power_dpm_force_performance_level
and then you echo "high" > /sys/class/drm/card0/device/power_dpm_force_performance_level
that should set the coreclock to highest setting.
To further increase coreclock und vram clock you can do that in
/sys/class/drm/card0/device/pp_sclk_od
=> GPU clock seems to be a sort of multiplier CAUTION!!!
/sys/class/drm/card0/device/pp_mclk_od
=> MEM clock seems to be multiplier CAUTION!!!!
hope that helps you
I am a newbie . we are using NXP 's jn518 ek 010 and I am using jennet stack .
we are using win 7 and for application development we are using eclipse .
our project task is to get the temperature , humidity and luminosity sensors value on PC , from which decision making will be proceeded.
can any one guide me how to get these values in human readable format?
I have read about the custom flash programmer which provide these functionality but they were limited to jn5139.
2 )Is it can be done by the help of wireshark?
3 ) can I get values with the help of hyper terminal?
Thanks in advance.