I have install OS in SD card and after installation OS is boot successfully but display below message every time:
http://prntscr.com/fbhj3j
I did not connect LAN cable raspberry board.
If this issue is because I cannot connect internet using wifi? If yes, how?
You need to continue to follow the instructions here: https://developer.android.com/things/hardware/raspberrypi.html
A Raspberry Pi will not connect to the Wifi if you have not first connected to an ethernet lan cable first. (Once you are connected via ethernet you then can configure the wifi and finally remove the ethernet cable).
So you are up to this step:
Connect an Ethernet cable to your local network.
When this is connected, your screen will show the IP address of the Raspberyy Pi on your local network
Related
I have the following setup:
Ubuntu 18.04 PC connected with an ethernet cable to a raspberry pi 3+.
What I want:
I am using ssh to connect to the Pi. I would like that the Pi can get internet access through the ethernet. Meaning, that the Pi is using the internet of the PC.
It would be nice if you could help me with a guide and tell me what I have to change in order to make it work.
What I tried:
I have a static IP on my PC as well as on the Pi.
In the network manager (nm-connection-editor), I set the IPv4 method to 'Shared to other computers'.
How do I now tell the Pi to use this network?
Thanks for your help
I am new to Home Assistant and I currently have a disc image of the software installed on a Raspberry Pi 3b. I have managed to get this up and running successfully by connecting my PI to an internet connection via an ethernet cable and connecting my laptop to the same network wirelessly. The problem I am facing is that I wish to run this locally without an internet connection and simply connecting my laptop to the PI with the Ethernet cable does not seem to be working. I have tried looking around for support but I cannot seem to find much on the matter.
Home Assistant's default port is 8123 not 8023.
If there is a direct connection between your laptop and the Raspberry Pi then the chance is high that mDNS won't not work. Thus, homeassistant.local is not reachable.
Add a static IP address for your Home Assistant host and your laptop.
I have a raspberry pi 3 connected to my PC (Windows 7) via ethernet using DHCP server and VNC viewer and it works perfectly.
The pc is connected to a WIFI.
I want to access to internet from my raspberry pi, I tried the ICS sharing but it didn't work:
I shared the wifi connection:here
changed the ip address: here
after sharing the wifi connection, I am unable to access internet from both the pc and rasp even though they are in the same ip address.
On PC,On the Rasp
Can you please help me to find a solution?
Thank you.
You have to create a network bridge.
Select the two networks, right click and select bridge connections.
I'd use static IP address on your PI and your PC's ethernet
how do i connect my raspberry pi to WIFI without ethernet cable. I have a wifi dongle or usb connected to my pi but the internet still doesnt work unless i connect a ethernet canble. can someone please help me out
You can setup your wi-fi via the command line, see a detailed guide on the official site:
https://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md
Another option is to use the PIXEL desktop:
https://www.raspberrypi.org/documentation/configuration/wireless/pixel-desktop.md
I need a good tutorial that will explain on how to setup a ssh connection via a direct ethernet connection to a Raspberry Pi with a static IP running Arch Linux. I have tried a few but all seem to fail. Any Suggestions?
What kind of ethernet connection? Do you have a crossover cable? If yes you can connect it directly to your computer and assign it an IP address. If not, you can connect your Pi to the same router as your computer is connected to, and install nmap on your machine. You can run the following command to identify your raspberry pi's IP address (assuming your router assigns IP addresses in 192.168.1.x space):
nmap -sn 192.168.1.1/24
The Raspberry Pi will show up with its ethernet MAC address and most likely also that the address belongs to RPI foundation. You can then ssh into it.