How do you find out WHY the connecting Server failed? There must be log the reports why it fails, but I can’t find it in the pgAdmin3 program. I cannot get PpgAdmin connection to the server.
Below See Screen Shot below.
Please note I am beginner in SQL databases—so I don’t know a lot yet. There must be a way in the program to find out WHY it failed.
Without any clues to why it failed, it is very hard to diagnose the issue. Which is the focus of this question.
I tried a re-install of Postgresql, I discovered a install error that happen the first time but I missed noticing the first time. Install Error
Also found install logs at C:\PostgreSQL\logs\PostgreSQL-installLog Which lead me to event viewer and I found these errors.
Event View
Anyone have idea of what they mean or more IMPORTANTLY how to solve this issue?
Related
I created a solution with a few applications, and it worked perfectly. But a day later when I was about to debug the solution again, it suddenly cannot start.
I did have firewall and AV disabled, both when it worked and later when it didn't work.
It works fine when deployed to azure, but not locally.
The error thrown is:
Exception from HRESULT: 0x80071BFF
at System.Fabric.Interop.NativeRuntime.FabricGetNodeContext()
at System.Fabric.FabricRuntime.NativeFabricRuntimeFactory.GetNodeContextHelper()
at System.Fabric.Interop.Utility.WrapNativeSyncInvoke[TResult](Func`1 func, String functionTag, String functionArgs)
A related post register-servicefabricapplicationtype-on-a-secure-cluster-always-times-out
describes a similar thing.
However, I get this while debugging locally and with smallest possible application: I even just created 1 application, 1 actor, did no changes, hit F5 and I get this error.
So, I looked at service-fabric-troubleshoot-local-cluster-setup and while I also get the TypeInitializationException, the solution of:
Your path variable was not correctly set during installation. Please sign out of Windows and sign back in. This will fully refresh your path.
did not work at all.
Nothing else on that page seemed to be related.
Now I begin to feel that I've hit the end of what key words I can google, and still I have no idea what to do.
Any help would be greatly appreciated.
EDIT:
I've tried starting via cluster manager and apps can still not start.
I've removed apps, removed cluster, tried with new solutions, over and over. The only thing I haven't tried is reinstalling SDK and VS. I'm a bit reluctant to reinstall VS, so I'd hope to find some clues before resorting to that.
UPDATE1:
Now I reinstalled Service Fabric v. 5.3.311.9590, SDK and Tools.
Created a solution, added a stateless service. Hit F5. The exact same error is thrown.
I will now try to install on another machine with mostly the same configuration.
UPDATE2:
Installed the SDK on an identical VM, Win10, also with VS2015 Update 3. Created solution, added 1 actor, hit F5 and also on this macchine the exact error is thrown.
I tried Debug without debugging (as mentioned here) to attach later. But the application never starts. It is failed. This is the same on both the machines.
It all worked and from one day to the other it doesn't, and it's a problem that I cannot find anywhere on the net. What can this be? I found that the security updates from windows was made about the same date this happened...
I will uninstall and try again.
UPDATE3:
Uninstalling security update was not possible, but I could hide a couple of other updates. To no luck though.
From here I found this https://github.com/Azure/service-fabric-issues/issues/15 and realised I actually was very low on diskspace, and so I increased it (hyper-v manager) to 20 gigs free. But no, still the same problem.
I have been having problems working with TestComplete. What I have are:
TestComplete Version 10.0.531.7, 64 bits
Windows 7 Enterprise, Service Pack 1
Whenever I start TestComplete, it gives me this error. Please see screenshot below:
If I choose to
Don't terminate the application AND
Don't send
TestComplete allows me to proceed but after I click on "Edit" button then "Next", it tells me that the specified data source can not be found. Please see screenshot below:
I am not really sure if those two errors are related, has anyone seen this kind of error before?
PS. I have tried reinstalling Oracle data base 11.2.0, but it does not help.
Many thanks
I found the problem:
I needed to install Oracle ODAC101040.exe
Now the problem has been solved.
I have wrote a function which technically and logically is correct and while running it runs perfectly locally. But on server I am getting the above error which I could not figure out. I am on protractor version 1.6.0 as same as server but still not able to figure out what causes this.
Scenario is like, I have created many it functions inside my spec.js. But when I ran my spec starting two it functions execute precisely, but on third it scripts fails with above error on server. But when I ran the same spec on my local system with similar settings and configuration, it runs smoothly. Please give me any suggestion if you have encounter the same issue earlier. You can also share the link of a blog if you have any. I am a newbie. Thanks in advance.
Actually , I did a mistake, when we use non angular locators we have to use findElementDriver instead of findElement. Locally, its runs whithout any issues but on server it gives the above error.
I am in the middle of rebuilding my VPS and I am getting an error in WHM.
CENTOS 6.5 x86_64 virtuozzo – vps-1......... WHM 11.34.2 (build 8)
Reasons for blocked updates
Please correct these issues and rerun updates.
fatal: Upgrade is blocked because EXIMUP is set to 'never' in your configuration. To proceed, you can touch file '/var/cpanel/exim.unmanaged' and run the upgrade one more time. Please refer to our documentation at http://go.cpanel.net/1136UpgradeExim for more information.
The URL for help doesn't exist.
I do not see this file in when I check for it.
I found the Exim Configuration Manager but do not see anything that matches what the error states.
I have a feeling this is fairly easy fix but I am far from an expert on VPS managing. I'm learning the hard way to put it nicely...
Does anyone know how I can clear this out so I can upgrade WHM?
I see in their documentation:
To upgrade from cPanel & WHM version 11.34 and earlier:
Touch /var/cpanel/exim.unmanaged
Run the upgrade again.
What does "Touch"mean? I tried toggling the exim option in preferences but it made no difference.
After a night of fighting this I find the answer right after I post. Here is how I solved it.
Touch means to create or modify a file without actually writing to it. So in this case since the file did not exist. I created a new file in /var/cpanel/ called 'exim.unmanaged'
After placing that file in the directory I ran the updates again and it is now upgrading WHM and cPanel.
Pros know this I am sure but hopefully this will be helpful for newbi VPS admins like myself.
I am using Microsoft Robotics Studio for a school project and I am getting a strange error when I try to run the Visual Simulation Environment. It was working fine until yesterday and then suddenly it gave me a runtime error saying "Illegal command line arguments... do not use VPLHost directly, use dsshost instead to run a manifest" But I am only clicking on Run in VPL/DSS Manifest editor.
I am running MRDS as administrator and I even tried re-installing MRDS but it is still showing the same MS VPL Runtime error. I tried to search online, but cannot find any suitable solution.
I already tried running the existing samples, I.e. Urban Environment, Multiple Simulated Robots etc. but it still gives me the same error. The strange thing is that it was working perfectly one minute, and then started giving me this error message the next minute, when I had not changed anything in between. In fact, I had wanted to change something in my manifest, so I closed the running VPL application, closed VPL and opened DSS manifest editor, and ran my manifest and that is when I got this error.
What is going wrong? Is some MRDS script using vplhost32.exe instead of dsshost? If so, then where and how do I change it?
I tried running the urban envrionment manifest from the command prompt and Using DSSHost32 directly. This time, it didn't give me a runtime error but an intiialization error. I tried changing port numbers but it still doesn't work. I have deleted many files from my computer to free space (JIC) and it still doesn't work. The window just doesn't open even when I hover over it in Windows 7.
The error message looks like this: Only one usage of each socket address (protocol/network address/port) is normally permitted."
This was even after I checked netstat for free ports and tried but I get this error message. Its either this one or the "Don't use VPLHost directly" if I run it through VPL or DSS Manifest Editor.
Could it be that some external services are interfering with DSSHost/VPLHost? Are there any such services which I could try killing? ANY help/suggestion would help right now as my project is due Thursday and this is a really unfortunate time for it to be acting up like this.
Does the problem reproduce after logging off & logging back on? It's likely that you had a process hanging around that you weren't aware of. Logging off should shut down any processes you personally started.
I don't know the solution of your problem, but it would be better that you post your question on the link below:
http://p2p.wrox.com/book-professional-microsoft-robotics-studio-isbn-978-0-470-14107-6-410/
[official forum for the book : Professional Microsoft Robotics Studio], i hope you will shortly get reply there,
The other option is to post your question on the msdn forum,
http://social.msdn.microsoft.com/Forums/en-US/category/robotics
hope this would help....