Am new to drupal, am working on version 8.3.5 trying to install a new module administration menu to my localhost without FTP.
I have extracted all files of module to /sites/all/modules folder.The menu is displaying in 'Extend' section but not displaying in my website.
The modules are 'checked' too, but how to enable it and display in my website? Thanks
I have executed this command sudo chown -R www-data sites/all/modules
too.
Current output:-(Only one admin toolbar already there after installation of drupal)
Current Settings in Extend section: (Admin toolbar always checked and unable to uncheck too.How to activate and deactivate this module here?)
Expected Output is two admin toolbar like this:- (Below screenshot is an example of administration menu module in drupal7)
Thanks
Steps to install new modules
Download and extract the module to to the modules folder.Since it is a contibute module better add it in a folder named contrib. So the path will be drupal_folder/modules/contrib/your_module
Now your_module will be available in the List section on http://your_site.com/admin/modules
Check ane enable your_module
Now the enabled module will be checked in the List section and also available in the Uninstall section(http://your_site.com/admin/modules/uninstall)
Clear cache
Using drush
Download and install modules with drush from terminal
drush dl module_name
drush en module_name
Try to clear caches using drush from the terminal.
drush cr
Update drush
Note: Drupal8 requires latest version of drush
To find current version of Drush use the command:
drush --version
If its alower version please update drush using composer, if composer already installed skip the step to install composer.
cd ~
curl -sS https://getcomposer.org/installer | php
export PATH="$HOME/.composer/vendor/bin:$PATH"
source ~/.bashrc
composer global require drush/drush:8.*
drush --version
In Drupal 8, the correct location for modules is the modules/ folder which is at the root of your project. People also add a contrib/ and custom/ folder inside modules/ to differentiate the ones you create from the ones you install.
I'm curious about how the module has been discovered being at the location you indicated. Anyway, you say that the administration menu module is checked so it should be installed. Do you have a toolbar at the top of your website pages? What is the name of the module that is checked in Extend?
Related
Question:
Is there a way to install a downloaded NBM (Netbeans Module) into an already installed Netbeans IDE via CLI?
Current setup
Netbeans 12.3 with Windows 10
Netbeans 12.3 with Linux Mint 20.1
Relevant scenario
If the question comes to your mind 'why aren't you just using the GUI?' or anything like that. Think of the following scenario. When working on an air gapped network with 50 computers you're the one having to install Netbeans plugins on all of that PCs. You're able to put files on those PCs and execute a command via console and you don't want to run around all the buildings and clicking through the process.
Thank you very much in advance.
I think I found a solution. I'll post it here to reflect my research because I've never found a answer on stackoverflow.
When Netbeans is already installed you can use the --help parameter like:
C:\Program Files\NetBeans\netbeans\bin\netbeans64.exe --help
This lists lot of available parameters (which I haven't found a list of on the web) like (shortened):
General options:
--help show this help
--jdkhome <path> path to JDK
--console new open new console for output
Module reload options:
--reload /path/to/module.jar install or reinstall a module JAR file
Additional module options:
--modules
--refresh Refresh all catalogs
--list Prints the list of all modules, their versions and enablement status
--install <arg1>...<argN> Installs provided JAR files as modules
--disable <arg1>...<argN> Disable modules for specified codebase names
--enable <arg1>...<argN> Enable modules for specified codebase names
--update <arg1>...<argN> Updates all or specified modules
--update-all Updates all modules
Core options:
--fontsize <size> set the base font size of the user interface, in points
--userdir <path> use specified directory to store user settings
--nosplash do not show the splash screen
In my case the solution was to use the --install parameter pointing to the jar file to install.Be aware that the NBM files are just containers containing the jar file and some more meta data files like config xml files. You're able to open it via 7zip for example. And you'll have to take care of all the dependencies yourself.
How can I add DHL Market Place in my Magento 2 admin? Been searching on how to enable it but can't find any solution. Should I just copy the download file into the app folder? or do I need to go to the admin panel?
Note: Beginner here
Ok for those who will be encountering the same issue as I have here is the answer and I'm referring this to the answer that the developer gave me.
If you are running in PHP 7+ and want to install via VCS then below are the command you need to run and DON'T use installation that they provided in the README.md specially for version 0.10.0. It lacks the proper instruction on how to install it in Magento 2.3 using version 0.10.0 Below are the correct command needed to run and install DHL in your Magento project
composer config repositories.dhl-shipping-m2 vcs git#github.com:netresearch/dhl-module-shipping-m2.git <-- This is the important part to make it work
composer require dhl/module-shipping-m2:0.10.0
Magento2 follows a structure to add custom modules .. Their are two ways to add extensions in m2..
1 : Install it from the composer Eg: for DHL to install from composer
composer require dhl/module-shipping-m2:0.10.0
It will directly saved in vendor folder
2 : Manual installation , Download the extension and copy that into the magento root ie.. app/code/yourextension
I've been trying to get Zend installed on my Mac Pro for some time. I've tried installing it manually, with homebrew, and with port. I've changed php's, reinstalled php, updated php, reinstalled openssl multiple times.
php.ini has openssl in it and it is uncommented, curl is also enabled.
no matter which way I go about it I always get a message like this or very similar (always ssl)
You must enable the openssl extension to download files via https
I also installed a certificate for ssl.
currently I have downloaded the zip for the Zend 2.2.2 'tutorial', extracted to a sites directory and have run
composer install
which as given me:
Loading composer repositories with package information
Installing dependencies (including require-dev)
- Installing zendframework/zendframework (2.2.2)
[RuntimeException]
You must enable the openssl extension to download files via https
install [--prefer-source] [--prefer-dist] [--dry-run] [--dev] [--no-dev] [--no-custom-installers] [--no-scripts] [--no-progress] [-v|vv|vvv|--verbose] [-o|--optimize-autoloader]
I know its installed. I've reinstalled it 3 times. Only thing I can think of is maybe there is more than one php.ini but I haven't been able to find a second one.
thanks in advance for any advice.
I ran php info in apache and got the old install of php version 5.3, when I run it from the command line I get the new 5.4 ?
$ openssl version
OpenSSL 1.0.1e 11 Feb 2013
$ composer diag
Checking platform settings: FAIL
The openssl extension is missing, which will reduce the security and stability of Composer.
If possible you should enable it or recompile php with --with-openssl
Checking http connectivity: OK
Checking composer.json: OK
Checking disk free space: OK
Checking composer version: OK
There is more than one php.ini - the command line version of PHP has a separate one. To see what that is, run php -i | grep ini from the command line - the output should include the .ini files being used near the top.
(Disclaimer: I'm not a Mac user so things may be different in Apple world.)
I'd like to say there was an easy fix. My suggestion is to use homebrew, install everything, then make sure your php.ini is in the right spot (probably have to move it) and also that you change the permissions on local\openssl so that homebrew can write to it. Eventually by moving php.ini around and installing php54 I was able to get it to work.
these are great resources
http://juniorgrossi.com/2013/working-with-multiple-php-versions-on-mac-os-x/
http://railsapps.github.io/openssl-certificate-verify-failed.html
I'd like to install a PHP extension on a bluehost shared site; specifically the MongoDB driver. Since pecl is unable to write to the primary server directory that has all the installed extensions, I'd like to install the mongo.so file to a directory I specify under my home. The closest article I found on the web was:
http://www.site5.com/blog/programming/php/how-to-setup-your-own-php-pear-environment/20090624/
However, after following the steps when I use the "pecl install mongo" command, it still keeps trying to install to bluehost's central directory on the server.
According to my web host's technical support team, utilising the pecl installer attempts to install the extension server-wide rather than under your account only. My web host doesn't allow server-wide installations in their shared environment for security reasons and because they want to keep their fleet universally the same across the board. I suspect your host is the same.
However, they did suggest I download, configure and install the pecl package (pecl_http) in my account only (rather than server-wide) via the following manual process:
$ cd ~/
$ wget http://pecl.php.net/get/pecl_http
$ tar -zxvf pecl_http.tar.gz
$ cd pecl_http
$ phpize
$ ./configure --prefix=~/bin
$ make
$ make test
$ make install
A successful install will have created extname.so and put it into the
PHP extensions directory. You'll need to edit php.ini (in my case,
this was a copy of the standard php.ini file that I placed in the same
folder as the script using the extension) and add an
extension=extname.so line (in my case, extension=http.so) before you can use the extension.
http://www.php.net/manual/en/install.pecl.phpize.php
Note that the tilde character (~) in the above code refers to the home directory of the current user (e.g. /home/username on my host's server).
Issues you may run into
When using the tar command, a "cannot open: not a directory" error
appeared as pecl_http had been downloaded without a file extension.
This was easily corrected:
mv pecl_http pecl_http.tar.gz
When using the make install command, a "cp: cannot create regular
file...: Permission denied" errror appeared. I resolved this issue
by changing the ext_dir for pecl...
pecl config-set ext_dir /home/username/bin/extensions
...and re-running make install. I also had to copy the http.so extension to /home/username/bin/extensions and then reference that location in my php.ini file:
extension_dir = "/home/username/bin/extensions"
this sounds like you don't have root access to your server. if your need to compile anything you must be have root access permission to server, or maybe you must be one of the sudoers.
I want to write application which uses Postgresql as DBMS.
To write client application do I need libpq library and header files?
If yes where I would get libpq library and header files.
Libpq is included in the full PostgreSQL source code. You can use just libpq without the rest of PostgreSQL, but must download the full package.
You can download it from the PostgreSQL Downloads page.
Once you extract the full package it is inside src\interfaces\libpq.
The PostgreSQL installation guide details how to install only the client libraries in the Installation section, under Client-only installation.
Libpq documentation is also available.
In postgresql sources, src\interfaces\libpq.
And yes, it is possible to compile only the libpq.
get the lipq from repo, {for debian} :
sudo apt-get install libpq-dev
I was also facing this issue but didn't got a clear answer:
This issue clearly states that while installing diesel-cli system is not able to locate libpq.lib
First of all you should have a Postgres installed on your machine.
Also diesel require visual c++, thus download and install it if not already, the size of setup will be ~5gb.
Once above installations are done you need to setup environment variables:
In my case path of Postgres installation is C:\Program Files\PostgreSQL thus add 2 environment variable path under User variables add new in Path where your libpq.lib is located in my case it is available in both C:\Program Files\PostgreSQL\12\lib and C:\Program Files\PostgreSQL\12\bin
Once this is added create one more environment variable PQ_LIB_DIR and set path as shown below
Note: Once done re-trigger the installation command in a new cmd window
Source: pq-sys and github-solution
For Windows users, it's in (version may be different)
C:\Program Files\PostgreSQL\11\lib
There you find libpq.lib. Provide this directory to Linker input.
Don't forget to include C:\Program Files\PostgreSQL\11\include directory for include directories.
I fix this problem reccently. This is a solution if you don't want to install Postgres in you windows.
At first, you need download Postgres Binaries. The version I download is 13.6, but it's seems like any version is fine.
Unzip the zip file.Copy libpq.lib from pgsql\lib to shomewhere like C:\Program Files\Postgres\lib.
Execute the following command in cmd window.
setx PQ_LIB_DIR "{where_you_copy_to}"
Open a new cmd windows and install diesel_cli
cargo install diesel_cli --no-default-features --features postgres
In linux vertify you get the libpq.
1st, there is an app: pg_config: https://www.postgresql.org/docs/current/app-pgconfig.html
after you found out the pg_config absolute bin path.(if you installed multi version of postgressql) Then You can get
--includedir
Print the location of C header files of the client interfaces.
--libdir
Print the location of object code libraries.
Then try to compile/build some example code: https://www.postgresql.org/docs/current/libpq-example.html
Some common failure example: https://www.postgresql.org/docs/current/libpq-build.html
You can install Postgres locally from https://www.enterprisedb.com/downloads/postgres-postgresql-downloads but select only "Command line tools" for install.
After that, you can found libpq.dll in C:\Program Files\PostgreSQL\15\bin