Using jqGrid free (version 4.15.6) to show very basic information about invoices (ie: date created, date due, client, total, status). The invoices grid only has a few pertinent columns that are displayed because it is just not needed to show more than that. In reality there are a lot of other invoice-related fields that are not shown. I would like to offer end-users the ability to filter the grid based on a lot of these other parameters that are simply not part of the grid contents.
I know jqGrid offers built-in searching, and you can easily just add hidden columns with all the data, but I feel this is not good for us--invoices contain a lot of data--data that is not necessarily present in just the invoices database table. We want the grid to provide many other filtering options outside of the base invoice data but we do NOT want to use the built-in filter options. Instead, I would like to use a separate HTML table with a bunch of search fields that our server-side code would know how to pull back). When one decides to invoke the external filter, we want the grid to load all invoices matching that combined filter. And if one chooses to navigate using the grid's paging buttons, we want the grid to continue using the original external filtering parameters.
Hope this makes sense. Maybe I am just overthinking this but I am fairly certain the grid is designed to use it's built in filtering/searching tools/dialog and I have not found anyway to override this behavior. Actually I have using an older jqGrid but that involved using jQuery to completely REPLACE the default pager with custom HTML and event handling. I never could figure this out with older jqGrid so I chose to write it myself. But that code is less than optimum and even I know it is subject to much criticism. Having upgraded to 4.15.6, I want to do this the best way and I want to keep it logical and practical.
I have tried using beforeRequest() and onPaging() events to change the 'url' parameter, thinking that if I modified the url, I could change the GET to include all of our custom filtering fields. It seems that does not work as the url NEVER changes from the originally defined value. Console logging does show the events firing but no change to url. On top of that, the grid ALWAYS passes its own page field, _search field, etc. to the server so the server NEVER sees the filter request.
How does one define their own custom filtering coupled with paging loader and still take advantage of the built-in paging events? What am I missing?
**** DELETED CODE THAT WAS ADDED TO QUESTION THAT DID NOT PERTAIN TO ORIGINAL QUESTION ISSUE *********
It's difficult to answer on your question because you didn't posted code fragments, which shows how you use jqGrid and because the total number of data, which could be needed to display in all pages isn't known.
In general there are two main alternatives implementing of custom filtering:
server side filtering
client side filtering
One can additionally use a mix from both filtering. For example, one can load from the server all invoices based on some fixed filters (all invoices of specific user or all invoices of one organization, all invoices of the last month) and then use loadonce: true, forceClientSorting: true options to sort and to filter the returned data on the client side. The user could additionally to filter the subset of data locally using filter toolbar of searching dialog.
The performance of client side is essentially improved last years and loading relatively large JSON data from the server could be done very quickly. Because of that Client-Side-Filtering is strictly recommended. For better understanding the performance of local sorting, filtering and paging I'd recommend you to try the functionality on the demo. You will see that the timing of local filtering of the grid with 5000 rows and 13 columns is better as you can expect mostly from the round trip to the server and processing of server side filtering on some very good organized database. It's the reason why I recommend to consider to use client side sorting (or loadonce: true, forceClientSorting: true options) as far it's possible.
If you need to filter data on the server then you need just send additional parameters to the server on every request. One can do that by including additional parameters in postData. See the old answer for additional details. Alternatively one can use serializeGridData to extend/modify the data, which will be set to the server.
After the data are loaded from the server, it could be sorted and filtered locally before the first page of data will be displayed in the grid. To force local filtering one need just add forceClientSorting: true additionally to well known loadonce: true parameter. It force applying local logic on the data returned from the server. Thus one can use postData.filters, search: true to force additional local filtering and sortname and sortorder parameter to force local sorting.
One more important remark about using hidden columns. Every hidden column will force creating DOM elements, which represent unneeded <td> elements. The more DOM elements you place on the page the more slow will be the page. If local data will be used (or if loadonce: true be used) then jqGrid hold data associated with every row twice: once as JavaScript object and once as cells in the grid (<td> elements). Free jqGrid allows to use "additional properties" instead of hidden columns. In the case no data will be placed in DOM of the grid, but the data will be hold in JavaScript objects and one able to sort or filter by additional properties in the same way like with other columns. In the simplest way one can remove all hidden columns and to add additionalProperties parameter, which should be array of strings with the name of additional properties. Instead of strings elements of additionalProperties could be objects of the same structures like colModel. For example, additionalProperties: [{ name: "taskId", sorttype: "integer"}, "isFinal"]. See the demo as an example. The input data of the grid can be seen here. Another demo shows that searching dialog contains additional properties additionally to jqGrid column. The commented part columns of searching shows more advanced way to specify the list and the order of columns and additional properties displayed in searching dialog.
Forgive my answering like this but this question started out on one subject related to filtering and paging but with using an external filtering source. Oleg actually has several demos over many threads that I was able to use to accomplish the custom filtering and maintain default built-in paging. So his answer will be the accepted answer for the original question topic.
But in the solution of original, I encountered another issue with loading the grid initially. I wanted to have the grid load with default filtering values should no other filter already be in place. That really should have been a different question because it really did not affect the first.
I found yet another Oleg reply on a completely different question:
jqGrid - how to set grid to NOT load any data initially?.
Oleg answered that question and that answer solved our second need to load one way, then allow another way.
So, on initial load, we look for the filter params server-side. None given? We pull records using default filtering. Params present? We use initial provided params. The difference with initial loading we do not AJAX exit. We instead json_encode the data and place it in the grid definition as follows:
$('#grd_invoices').jqGrid(
...
url: '{$modulelink}&sm=130',
data: {$json_encoded_griddata},
datatype: 'local',
...
});
Since the datatype is set to 'local', the grid does NOT go to server initially, so the data parameter is used by the grid. Once we are ready to filter, we use Oleg's solution from yet another answer on yet another question to dynamically apply the filter as follows:
var myfilter = { groupOp: 'AND', rules: []};
myfilter.rules.push({field:'fuserid',op:'eq',data:$('#fuserid').val()});
myfilter.rules.push({field:'finvoicenum',op:'eq',data:$('#finvoicenum').val()});
myfilter.rules.push({field:'fdatefield',op:'eq',data:$('#fdatefield').val()});
myfilter.rules.push({field:'fsdate',op:'eq',data:$('#fsdate').val()});
myfilter.rules.push({field:'fedate',op:'eq',data:$('#fedate').val()});
myfilter.rules.push({field:'fwithin',op:'eq',data:$('#fwithin').val()});
myfilter.rules.push({field:'fnotes',op:'eq',data:$('#fnotes').val()});
myfilter.rules.push({field:'fdescription',op:'eq',data:$('#fdescription').val()});
myfilter.rules.push({field:'fpaymentmethod',op:'eq',data:$('#fpaymentmethod').val()});
myfilter.rules.push({field:'fstatus',op:'eq',data:$('#fstatus').val()});
myfilter.rules.push({field:'ftotalfrom',op:'eq',data:$('#ftotalfrom').val()});
myfilter.rules.push({field:'ftotal',op:'eq',data:$('#ftotal').val()});
myfilter.rules.push({field:'fmake',op:'eq',data:$('#fmake').val()});
myfilter.rules.push({field:'fmodel',op:'eq',data:$('#fmodel').val()});
myfilter.rules.push({field:'fserial',op:'eq',data:$('#fserial').val()});
myfilter.rules.push({field:'fitemid',op:'eq',data:$('#fitemid').val()});
myfilter.rules.push({field:'ftaxid',op:'eq',data:$('#ftaxid').val()});
myfilter.rules.push({field:'fsalesrepid',op:'eq',data:$('#fsalesrepid').val()});
var grid = $('#grd_invoices');
grid[0].p.search = myfilter.rules.length>0;
$.extend(grid[0].p.postData,{filters:JSON.stringify(myfilter)});
$('#grd_invoices').jqGrid('setGridParam',{datatype:'json'}).trigger('reloadGrid',[{page:1}]);
This allows us to have the grid show initial data loaded locally, and then subsequent filtering changes the grid datatype to 'json', which forces the grid to go to server with new filter params where it loads the more specific filtering.
Credit goes to Oleg because I used many of his posts from many questions to reach the end result. Thank you #Oleg!
So i'm setting up my ld+json structured data, using Schema.org schemas. I am adding products with Offers but they only have a single price parameter.
I also looked at PriceSpecification too, but there is only "range" and "price".
Should I use 2 PriceSpecifications (or 2 Offers?) with visibly different names, or is there another option I haven't come across? Don't want search engines to get confused.
Thanks for any help.
You can use multiple PriceSpecifications. However "typically, only the subclasses of this type are used for markup." UnitPriceSpecification would be the best fit, or the setup price can be of type DeliveryChargeSpecification.
Alternatively, you can use a single CompoundPriceSpecification with multiple priceComponent properties, each of type UnitPriceSpecification. "The name property of the attached unit price specification for indicating the dimension of a price component"
I currently have a Web API project which currently has all the system processing in the same solution. I'm breaking this out into separate solutions so that they can be ran independently (e.g. an Azure WebJob) as I don't want to have to redploy the Web project if something in the backend has changed.
My issue with this is that even though I have separated the logic they are tied together by a single context so that if I make a change in one I will have to redeploy all as the migrations won't match up.
So that's why I've been looking at Bounded Context and DDD. I'm looking at how to break this up but having trouble understanding how relationships work.
A lot of the site is administrative (i.e. creating entities, no actual processing) so was going to split contexts around this e.g.:
A user adds and maintains currency conversion rates (this is two entities in
total).
A user adds and maintains details on how to process payments (note that is is not processing payments, it only holds information about paypal account details etc).
So I was splitting the context's up by this, does this sound reasonable to start with (there are a lot more like this such as tax bands, charge structures etc)?
If this is the way to go, how do I handle relationships between those two contexts? As an example:
A payment method requires a link to an 'active' currency conversion. I understand I can just have this as an Id, but I need to check it's state so need access to the model.
A currency conversion can only be set to 'Inactive' if there are no payment methods currently using it. Again this needs access to the other model.
So logically the models need access to each other, how would this be included in the context? Can I add navigation properties to a model in a different context? Or should I add it as a separate DbSet and possibly map using a view?
Thanks
So I was splitting the context's up by this, does this sound
reasonable to start with (there are a lot more like this such as tax
bands, charge structures etc)?
"So that they can be ran and deployed independently" may not be a sufficient heuristic to tell when you should split Bounded Contexts. This addresses one aspect of the solution space, but if you haven't looked well enough at the problem space, you'll suffer from a misalignment between BC's and subdomains that can cause a lot of friction. You might end up always deploying a cluster of seemingly unrelated "independently deployable units" together because you didn't realize they talk about the same thing.
Identifying subdomains is the product of distillating your business - separating the big functional areas and defining which parts are your core domain and which are ancillary activities. Each subdomain has its own specific semantics (Ubiquitous Language). In your case, as has been pointed out in the comments, Currency Conversion and Payment Methods might well be part of the same subdomain (Payment?). It does not automatically mean that they should also be in the same BC but it might be a good idea to keep subdomains aligned 1-to-1 with BC's, as additional BC's come at a cost.
Back to deployability, even if it can be one beneficial effect of Bounded Contexts, they are not always so easily translatable in terms of independent units of deployment. Context mapping patterns (Shared Kernel, Customer Supplier, etc.) and BC communication in general can lead to a model, and therefore a part of a codebase, being shared by multiple BC's. Code and API synchronization issues arise that can question a simplistic "deployable free electron" view.
Just because you're using the Bounded Context approach doesn't mean you have to use DDD's tactical patterns (Aggregate Root, invariants, etc.) inside each BC. Using them should be an educated decision to trade solution space complexity off for problem space manageability. If "Currency Conversion can only be set to inactive..." is the only rule pertaining to payment method and currency management in your business, it might not be worth the bother to give that Bounded Context a full-fledged rich domain model. CRUD could be better suited there.
In WCS7, is there any limitation to the bumber of itembeans associated to a Product bean
There is no hard limit in how many items (SKUs) you can have for each product, but you should consider the performance implications, both for listing on the product page, but also the size of your attribute tables.
I would challenge that if you have this need, there may be better approaches, e.g. if you're trying to model an ability to customize a product (e.g. "I want 20cm of this fabric"), you can use the product attribute model (see the PATTRIBUTE table) to allow shoppers to add custom attributes to the product when they add to cart.
The Extending an SOI service with UserData tutorial in the V7 Knowledge Center shows an example of doing so through engraving attributes for a product.
Yes, This is possible. considering the performance issues that can happen in PDP, if the product have to diaply all the variation details in PDP.
I need to design about 20 forms for various business processes.
We have to do this for about 10 countries and need some form of object prietnted approach because each country has different business rules and some different bits of data. However, there is also common data between some of these countries.
For example, we have 5 bits of data, 4 are common to every country, 1 is specific for individual countries.
eg common Name, Address, Telephone, Male/Female
eg Bonus payment
It's a question of how do you manage all the code changes easily in an enterprise application without the code being too unwieldy?
It's not just the languages, that would essentially be driven by a config code that lists the names for the lables...but also each form may have most of it's design from a gloabl form and then less from a local form, local to the specific country.
Isn't there some way to build a dynamic form on the fly so that you have 1 form ProcessBonus for every country, that form inherits fields from MainForm, and then it checks configuration Class in the background to build the form dynamicaly for each country?
I'm trying to avoid having 10 form types and then another 100 local forms for each country, that would be well over 1000 forms and would be unmanageable wouldn't it?
Actually what you need to achieve is Multiple Inheritance. .Net technologies , PHP, FLEX etc some other languages doesn't support multiple inheritance. Thus, Interfaces are used as a hack to achieve multiple inheritance.
You can find the implementation of interfaces in this link.
http://www.codersource.net/MicrosoftNet/CBasicsTutorials/CNetTutorialInterfaces.aspx