So I have to modify a .dxf file (an Autocad file) by changing some data in it for another one we choose previously. Changing some lines of a .txt file in Matlab is not pretty difficult.
However, I cannot change a specific line when the new input's length is larger than the old one.
This is what I have and I want to change only 1D57:
TEXT
5
1D57
330
1D52
100
AcDbEntity
8
0
If I have as an input BBBB, everything goes right since both strings have the same length. The same does not apply when I try with BBBBbbbbbbbbbb:
TEXT
5
BBBBbbbbbbbbbb2
100
AcDbEntity
8
0
It deletes everything after it until the string stops. It happens the same when the input is shorter: it does not change the line for the new string but it writes until the new input stops. For example, in our case with AAA as an input, the result would be AAA7.
This is basically the code I am using to modify the file:
fID = fopen('copia.dxf','r+');
for i = 1:2
LineToReplace = TextIndex(i);
for k = 1:((LineToReplace) - 1);
fgetl(fID);
end
fseek(fID, 0, 'cof');
fprintf (fID, [Data{i}, '\n']);
end
fclose(fID);
You need to overwrite at least the rest of the file in order to change it (unless exact number of characters is replaced), as explained in jodag's comment. For instance,
% String to change and it's replacement
% (can readily be automated for more replacements)
str_old = '1D52';
str_new = 'BBBBbbbbbbbbbb';
% Open input and output files
fIN = fopen('copia.dxf','r');
fOUT = fopen('copia_new.dxf','w');
% Temporary line
tline = fgets(fIN);
% Read the entire file line by line
% Write it to the new file
% Replace str_old with str_new when encountered - note, if there is more
% than one occurence of str_old in the file all will be replaced - this can
% be handled with a proper flag
while (ischar(tline))
% char(10) is MATLAB's newline character representation
if strcmp(tline, [str_old, char(10)])
fprintf(fOUT, '%s \n', str_new);
else
% No need for \n - it's already there as we're using fgets
fprintf(fOUT, '%s', tline);
end
tline = fgets(fIN);
end
% Close the files
fclose(fIN);
fclose(fOUT);
% Copy the new file into the original
movefile 'copia_new.dxf' 'copia.dxf'
In practice, it is often far easier to simply overwrite the whole file.
As written in the notes - this can be automated for more replacements and it would also need an additional flag to only replace a given string once.
Related
I have a txt file that has a lot of content and in this file there is a lot of "include" word and I want to get data from all three lines after that.
myFile.txt:
"-include:
-6.5 6.5
sin(x^2)
diff
-include
-5 5
cos(x^4)
diff"
How do I get this data in an array?
Based on your example (first include has : at the end, second one doesn't) you could use something like this.
fID = fopen('myFile.txt'); % Open the file for reading
textString = textscan(fID, '%s', 'Delimiter', '\n'); % Read all lines into cells
fclose(fID); % Close the file for reading
textString = textString{1}; % Use just the contents on the first cell (each line inside will be one cell)
includeStart = find(contains(textString,'include'))+1; % Find all lines with the word include. Add +1 to get the line after
includeEnd = [includeStart(2:end)-2; length(textString)]; % Get the position of the last line before the next include (and add the last line in the file)
parsedText = cell(length(includeStart), 1); % Create a new cell to store the output
% Loop through all the includes and concatenate the text with strjoin
for it = 1:length(includeStart)
parsedText{it} = strjoin(textString(includeStart(it):includeEnd(it)),'\n');
% Display the output
fprintf('Include block %d:\n', it);
disp(parsedText{it});
end
Which results in the following output:
Include block 1:
-6.5 6.5
sin(x^2)
diff
Include block 2:
-5 5
cos(x^4)
diff
You can tune the loop to suit your needs. If you just want line numbers, use includeStart and includeEnd variables.
I have a data file that contains parameter names and values with an equal sign in between them. It's like this:
A = 1234
B = 1353.335
C =
D = 1
There is always one space before and after the equal sign. The problem is some variables don't have values assigned to them like "C" above and I need to weed them out.
I want to read the data file (text) into a cell and just remove the lines with those invalid statements or just create a new data file without them.
Whichever is easier, but I will eventually read the file into a cell with textscan command.
The values (numbers) will be treated as double precision.
Please, help.
Thank you,
Eric
Try this:
fid = fopen('file.txt'); %// open file
x = textscan(fid, '%s', 'delimiter', '\n'); %// or '\r'. Read each line into a cell
fclose(fid); %// close file
x = x{1}; %// each cell of x contains a line of the file
ind = ~cellfun(#isempty, regexp(x, '=\s[\d\.]+$')); %// desired lines: space, numbers, end
x = x(ind); %// keep only those lines
If you just want to get the variables, and reject lines that do not have any character, this might work (the data.txt is just a txt generated by the example of data you have given):
fid = fopen('data.txt');
tline = fgets(fid);
while ischar(tline)
tmp = cell2mat(regexp(tline,'\=(.*)','match'));
b=str2double(tmp(2:end));
if ~isnan(b)
disp(b)
end
tline = fgets(fid);
end
fclose(fid);
I am reading the txt file line by line, and using general expressions to get rid of useless chars, and then converting to double the value read.
all,
I am writing a matlab program to read in text data and rearrange it. Now I am meeting with a new problem.
When I am writing data out to csv file, there are randomly missing data noted as ******, as shown below causing my program to terminate.
2055 6 17 24.2 29.57 7.02****** 0.99 2.65 2.73 4.09 0.11
Any one can help me with a small program to loop through all the text files in the folder, and replace the consecutive stars, with 0.00? The stars are always in columns 33 to 38, occupying 6 spaces. I want it to be changed to be two spaces followed by 0.00.
Thanks,
James
For a given text file, you can read it into memory, replace the asterisks with the desired text, and then overwrite the original text file:
filename = 'blah.txt'
% Read it into memory
fid = fopen(filename, 'r');
scanned_fields = textscan(fid, '%s', 'Delimiter','\n');
fclose(fid);
% The first (and only) field of textscan will be our cell array of text
lines = scanned_fields{1};
% Replace the asterisks with the desired text
lines = strrep(lines, '******', ' 0.00');
% Overwrite the original file
fid = fopen(filename, 'w');
fprintf(fid, '%s\n', lines{:});
fclose(fid);
To do this for all of the text files in your directory, you can use dir to get a list of files in your current directory that end in ".txt":
files = dir('*.m');
filenames = {files.name};
And then loop over the files:
for ii = 1:length(filenames)
filename = filenames{ii};
% Read it into memory
fid = fopen(filename, 'r');
scanned_fields = textscan(fid, '%s', 'Delimiter','\n');
fclose(fid);
lines = scanned_fields{1};
% Replace the asterisks with the desired text
lines = strrep(lines, '******', ' 0.00');
% Overwrite the original file
fid = fopen(filename, 'w');
fprintf(fid, '%s\n', lines{:});
fclose(fid);
% Go on to the next file
end
And of course, I would recommend creating a backup copy of this directory before running this, just in case something unexpected comes up.
I have a text file with two columns of data. I want to split this file and save it as two individual strings in matlab, but I also need to stop copying the data when I meet an identifier in the data then stat two new strings.
For example
H 3
7 F
B B
T Y
SPLIT
<>
Where SPLIT <> is where I want to end the current string.
I'm trying to use fopen and fscanf, but struggling to get it to do what I want it to.
I tried the following script on the example you provided and it works. I believe the comments are very self explanatory.
% Open text file.
fid = fopen('test.txt');
% Read the first line.
tline = fgetl(fid);
% Initialize counter.
ii = 1;
% Check for end string.
while ~strcmp(tline, 'SPLIT')
% Analyze line only if it is not an empty one.
if ~strcmp(tline, '')
% Read the current line and split it into column 1 and column 2.
[column1(ii), column2(ii)] = strread(tline, ['%c %c']);
% Advance counter.
ii = ii + 1;
end
% Read the next line.
tline = fgetl(fid);
end
% Display results in console.
column1
column2
% Close text file.
fclose(fid);
The key functions here are fgetl and strread. Take a look at their documentation, it has some very nice examples as well. Hope it helps.
I'm trying to load the following ascii file into MATLAB using load()
% some comment
1 0xc661
2 0xd661
3 0xe661
(This is actually a simplified file. The actual file I'm trying to load contains an undefined number of columns and an undefined number of comment lines at the beginning, which is why the load function was attractive)
For some strange reason, I obtain the following:
K>> data = load('testMixed.txt')
data =
1 50785
2 58977
3 58977
I've observed that the problem occurs anytime there's a "d" in the hexadecimal number.
Direct hex2dec conversion works properly:
K>> hex2dec('d661')
ans =
54881
importdata seems to have the same conversion issue, and so does the ImportWizard:
K>> importdata('testMixed.txt')
ans =
1 50785
2 58977
3 58977
Is that a bug, am I using the load function in some prohibited way, or is there something obvious I'm overlooking?
Are there workarounds around the problem, save from reimplementing the file parsing on my own?
Edited my input file to better reflect my actual file format. I had a bit oversimplified in my original question.
"GOLF" ANSWER:
This starts with the answer from mtrw and shortens it further:
fid = fopen('testMixed.txt','rt');
data = textscan(fid,'%s','Delimiter','\n','MultipleDelimsAsOne','1',...
'CommentStyle','%');
fclose(fid);
data = strcat(data{1},{' '});
data = sscanf([data{:}],'%i',[sum(isspace(data{1})) inf]).';
PREVIOUS ANSWER:
My first thought was to use TEXTSCAN, since it has an option that allows you to ignore certain lines as comments when they start with a given character (like %). However, TEXTSCAN doesn't appear to handle numbers in hexadecimal format well. Here's another option:
fid = fopen('testMixed.txt','r'); % Open file
% First, read all the comment lines (lines that start with '%'):
comments = {};
position = 0;
nextLine = fgetl(fid); % Read the first line
while strcmp(nextLine(1),'%')
comments = [comments; {nextLine}]; % Collect the comments
position = ftell(fid); % Get the file pointer position
nextLine = fgetl(fid); % Read the next line
end
fseek(fid,position,-1); % Rewind to beginning of last line read
% Read numerical data:
nCol = sum(isspace(nextLine))+1; % Get the number of columns
data = fscanf(fid,'%i',[nCol inf]).'; % Note '%i' works for all integer formats
fclose(fid); % Close file
This will work for an arbitrary number of comments at the beginning of the file. The computation to get the number of columns was inspired by Jacob's answer.
New:
This is the best I could come up with. It should work for any number of comment lines and columns. You'll have to do the rest yourself if there are strings, etc.
% Define the characters representing the start of the commented line
% and the delimiter
COMMENT_START = '%%';
DELIMITER = ' ';
% Open the file
fid = fopen('testMixed.txt');
% Read each line till we reach the data
l = COMMENT_START;
while(l(1)==COMMENT_START)
l = fgetl(fid);
end
% Compute the number of columns
cols = sum(l==DELIMITER)+1;
% Split the first line
split_l = regexp(l,' ','split');
% Read all the data
A = textscan(fid,'%s');
% Compute the number of rows
rows = numel(A{:})/cols;
% Close the file
fclose(fid);
% Assemble all the data into a matrix of cell strings
DATA = [split_l ; reshape(A{:},[cols rows])']; %' adding this to make it pretty in SO
% Recognize each column and process accordingly
% by analyzing each element in the first row
numeric_data = zeros(size(DATA));
for i=1:cols
str = DATA(1,i);
% If there is no '0x' present
if isempty(findstr(str{1},'0x')) == true
% This is a number
numeric_data(:,i) = str2num(char(DATA(:,i)));
else
% This is a hexadecimal number
col = char(DATA(:,i));
numeric_data(:,i) = hex2dec(col(:,3:end));
end
end
% Display the data
format short g;
disp(numeric_data)
This works for data like this:
% Comment 1
% Comment 2
1.2 0xc661 10 0xa661
2 0xd661 20 0xb661
3 0xe661 30 0xc661
Output:
1.2 50785 10 42593
2 54881 20 46689
3 58977 30 50785
OLD:
Yeah, I don't think LOAD is the way to go. You could try:
a = char(importdata('testHexa.txt'));
a = hex2dec(a(:,3:end));
This is based on both gnovice's and Jacob's answers, and is a "best of breed"
For files like:
% this is my comment
% this is my other comment
1 0xc661 123
2 0xd661 456
% surprise comment
3 0xe661 789
4 0xb661 1234567
(where the number of columns within the file MUST be the same, but not known ahead of time, and all comments denoted by a '%' character), the following code is fast and easy to read:
f = fopen('hexdata.txt', 'rt');
A = textscan(f, '%s', 'Delimiter', '\n', 'MultipleDelimsAsOne', '1', 'CollectOutput', '1', 'CommentStyle', '%');
fclose(f);
A = A{1};
data = sscanf(A{1}, '%i')';
data = repmat(data, length(A), 1);
for ctr = 2:length(A)
data(ctr,:) = sscanf(A{ctr}, '%i')';
end