How do I can find file system(like `/etc`) in `man` command - manpage

I want to know what is the role of etc in man command.
but, does not find etc in man.
$ man etc
No manual entry for etc
I am using CentOS. The details are below
$ cat /etc/centos-release
CentOS Linux release 7.3.1611 (Core)
Thank you for reading!

Related

WSL PowerShell always returns Processing fstab with mount -a failed

I've installed WSL for my Windows 11 distribution and also Ubuntu 20.04. I saw that many people say that I can use commands without opening a distro with the wsl command.
Somehow that does not work for me. As soon as I type in a command with wsl the result is:
Processing fstab with mount -a failed.
So for example: wsl rsync -r -v /mnt/d/DUMMY_SOURCE/ /mnt/e/DUMMY_DESTINATION
The only wsl command that really works is wsl -l -v
NAME STATE VERSION
* docker-desktop-data Stopped 2
docker-desktop Stopped 2
Ubuntu-20.04 Stopped 2
What is wrong with my setup?
As I posted this question here I was already recognizing this star before the docker-desktop-data distro. And that is where the problem comes from.
The star here signalizes that this one is the standard distro which is wrong of course. You need to check with wsl -l --all which one is the current default distro. For me it was:
Windows Subsystem für Linux-Distributionen:
docker-desktop-data (Standard)
docker-desktop
Ubuntu-20.04
After that change it to the right one (for me Ubuntu):
wsl --setdefault Ubuntu-20.04
Now the commands work as they should!

Azure Pipelines is it possible to run bash command with sudo? [duplicate]

I am trying to compile some sources using a makefile. In the makefile there is a bunch of commands that need to be ran as sudo.
When I compile the sources from a terminal all goes fine and the make is paused the first time a sudo command is ran waiting for password. Once I type in the password, make resumes and completes.
But I would like to be able to compile the sources in NetBeans. So, I started a project and showed netbeans where to find the sources, but when I compile the project it gives the error:
sudo: no tty present and no askpass program specified
The first time it hits a sudo command.
I have looked up the issue on the internet and all the solutions I found point to one thing: disabling the password for this user. Since the user in question here is root. I do not want to do that.
Is there any other solution?
Granting the user to use that command without prompting for password should resolve the problem. First open a shell console and type:
sudo visudo
Then edit that file to add to the very end:
username ALL = NOPASSWD: /fullpath/to/command, /fullpath/to/othercommand
eg
john ALL = NOPASSWD: /sbin/poweroff, /sbin/start, /sbin/stop
will allow user john to sudo poweroff, start and stop without being prompted for password.
Look at the bottom of the screen for the keystrokes you need to use in visudo - this is not vi by the way - and exit without saving at the first sign of any problem. Health warning: corrupting this file will have serious consequences, edit with care!
Try:
Use NOPASSWD line for all commands, I mean:
jenkins ALL=(ALL) NOPASSWD: ALL
Put the line after all other lines in the sudoers file.
That worked for me (Ubuntu 14.04).
Try:
ssh -t remotehost "sudo <cmd>"
This will remove the above errors.
After all alternatives, I found:
sudo -S <cmd>
The -S (stdin) option causes sudo to read the password from the standard input instead of the terminal device.
Source
Above command still needs password to be entered. To remove entering password manually, in cases like jenkins, this command works:
echo <password> | sudo -S <cmd>
sudo by default will read the password from the attached terminal. Your problem is that there is no terminal attached when it is run from the netbeans console. So you have to use an alternative way to enter the password: that is called the askpass program.
The askpass program is not a particular program, but any program that can ask for a password. For example in my system x11-ssh-askpass works fine.
In order to do that you have to specify what program to use, either with the environment variable SUDO_ASKPASS or in the sudo.conf file (see man sudo for details).
You can force sudo to use the askpass program by using the option -A. By default it will use it only if there is not an attached terminal.
Try this one:
echo '' | sudo -S my_command
For Ubuntu 16.04 users
There is a file you have to read with:
cat /etc/sudoers.d/README
Placing a file with mode 0440 in /etc/sudoers.d/myuser with following content:
myuser ALL=(ALL) NOPASSWD: ALL
Should fix the issue.
Do not forget to:
chmod 0440 /etc/sudoers.d/myuser
Login into your linux. Fire following commands. Be careful, as editing sudoer is a risky proposition.
$ sudo visudo
Once vi editor opens make the following changes:
Comment out Defaults requiretty
# Defaults requiretty
Go to the end of the file and add
jenkins ALL=(ALL) NOPASSWD: ALL
If by any chance you came here because you can't sudo inside the Ubuntu that comes with Windows10
Edit the /etc/hosts file from Windows (with Notepad), it'll be located at: %localappdata\lxss\rootfs\etc, add 127.0.0.1 WINDOWS8, this will get rid of the first error that it can't find the host.
To get rid of the no tty present error, always do sudo -S <command>
This worked for me:
echo "myuser ALL=(ALL) NOPASSWD:ALL" >> /etc/sudoers
where your user is "myuser"
for a Docker image, that would just be:
RUN echo "myuser ALL=(ALL) NOPASSWD:ALL" >> /etc/sudoers
In Jenkins:
echo '<your-password>' | sudo -S command
Eg:-
echo '******' | sudo -S service nginx restart
You can use Mask Password Plugin to hide your password
Make sure the command you're sudoing is part of your PATH.
If you have a single (or multi, but not ALL) command sudoers entry, you'll get the sudo: no tty present and no askpass program specified when the command is not part of your path (and the full path is not specified).
You can fix it by either adding the command to your PATH or invoking it with an absolute path, i.e.
sudo /usr/sbin/ipset
Instead of
sudo ipset
Command sudo fails as it is trying to prompt on root password and there is no pseudo-tty allocated (as it's part of the script).
You need to either log-in as root to run this command or set-up the following rules in your /etc/sudoers
(or: sudo visudo):
# Members of the admin group may gain root privileges.
%admin ALL=(ALL) NOPASSWD:ALL
Then make sure that your user belongs to admin group (or wheel).
Ideally (safer) it would be to limit root privileges only to specific commands which can be specified as %admin ALL=(ALL) NOPASSWD:/path/to/program
I think I can help someone with my case.
First, I changed the user setting in /etc/sudoers referring to above answer. But It still didn't work.
myuser ALL=(ALL) NOPASSWD: ALL
%mygroup ALL=(ALL:ALL) ALL
In my case, myuser was in the mygroup.
And I didn't need groups. So, deleted that line.
(Shouldn't delete that line like me, just marking the comment.)
myuser ALL=(ALL) NOPASSWD: ALL
It works!
Running shell scripts that have contain sudo commands in them from jenkins might not run as expected. To fix this, follow along
Simple steps:
On ubuntu based systems, run " $ sudo visudo "
this will open /etc/sudoers file.
If your jenkins user is already in that file, then modify to look like this:
jenkins ALL=(ALL) NOPASSWD: ALL
save the file
Relaunch your jenkins job
you shouldnt see that error message again :)
This error may also arise when you are trying to run a terminal command (that requires root password) from some non-shell script, eg sudo ls (in backticks) from a Ruby program. In this case, you can use Expect utility (http://en.wikipedia.org/wiki/Expect) or its alternatives.
For example, in Ruby to execute sudo ls without getting sudo: no tty present and no askpass program specified, you can run this:
require 'ruby_expect'
exp = RubyExpect::Expect.spawn('sudo ls', :debug => true)
exp.procedure do
each do
expect "[sudo] password for _your_username_:" do
send _your_password_
end
end
end
[this uses one of the alternatives to Expect TCL extension: ruby_expect gem].
For the reference, in case someone else encounter the same issue, I was stuck during a good hour with this error which should not happen since I was using the NOPASSWD parameter.
What I did NOT know was that sudo may raise the exact same error message when there is no tty and the command the user try to launch is not part of the allowed command in the /etc/sudoers file.
Here a simplified example of my file content with my issue:
bguser ALL = NOPASSWD: \
command_a arg_a, \
command_b arg_b \
command_c arg_c
When bguser will try to launch "sudo command_b arg_b" without any tty (bguser being used for some daemon), then he will encounter the error "no tty present and no askpass program specified".
Why?
Because a comma is missing at the end of line in the /etc/sudoers file...
(I even wonder if this is an expected behavior and not a bug in sudo since the correct error message for such case shoud be "Sorry, user bguser is not allowed to execute etc.")
I was getting this error because I had limited my user to only a single executable 'systemctl' and had misconfigured the visudo file.
Here's what I had:
jenkins ALL=NOPASSWD: systemctl
However, you need to include the full path to the executable, even if it is on your path by default, for example:
jenkins ALL=NOPASSWD: /bin/systemctl
This allows my jenkins user to restart services but not have full root access
If you add this line to your /etc/sudoers (via visudo) it will fix this problem without having to disable entering your password and when an alias for sudo -S won't work (scripts calling sudo):
Defaults visiblepw
Of course read the manual yourself to understand it, but I think for my use case of running in an LXD container via lxc exec instance -- /bin/bash its pretty safe since it isn't printing the password over a network.
Using pipeline:
echo your_pswd | sudo -S your_cmd
Using here-document:
sudo -S cmd <<eof
pwd
eof
#remember to put the above two lines without "any" indentations.
Open a terminal to ask password (whichever works):
gnome-terminal -e "sudo cmd"
xterm -e "sudo cmd"
I faced this issue when working on an Ubuntu 20.04 server.
I was trying to run a sudo command from a remote machine to deploy an app to the server. However when I run the command I get the error:
sudo: no tty present and no askpass program specified
The remote script failed with exit code 1
Here's how I fixed it:
The issue is caused by executing a sudo command which tries to request for a password, but sudo does not have access to a tty to prompt the user for a passphrase. As it can’t find a tty, sudo falls back to an askpass method but can’t find an askpass command configured, so the sudo command fails.
To fix this you need to be able to run sudo for that specific user with no password requirements. The no password requirements is configured in the /etc/sudoers file. To configure it run either of the commands below:
sudo nano /etc/sudoers
OR
sudo visudo
Note: This opens the /etc/sudoers file using your default editor.
Next, Add the following line at the bottom of the file:
# Allow members to run all commands without a password
my_user ALL=(ALL) NOPASSWD:ALL
Note: Replace my_user with your actual user
If you want the user to run specific commands you can specify them
# Allow members to run specific commands without a password
my_user ALL=(ALL) NOPASSWD:/bin/myCommand
OR
# Allow members to run specific commands without a password
my_user ALL=(ALL) NOPASSWD: /bin/myCommand, /bin/myCommand, /bin/myCommand
Save the changes and exit the file.
For more help, read the resource in this link: sudo: no tty present and no askpass program specified
That's all.
I hope this helps
The solution to the problem is
If you came across this issue anywhere else apart from the Jenkins instance follow this from the 2nd step. The first step is for the user who is having issue with the Jenkins instance.
Go to Jenkins instance of Google Cloud Console.
Enter the commands
sudo su
visudo -f /etc/sudoers
Add following line at the end
jenkins ALL= NOPASSWD: ALL
Checkout here to understand the rootcause of this issue
No one told what could cause this error, in case of migration from one host to another, remember about checking hostname in sudoers file:
So this is my /etc/sudoers config
User_Alias POWERUSER = user_name
Cmnd_Alias SKILL = /root/bin/sudo_auth_wrapper.sh
POWERUSER hostname=(root:root) NOPASSWD: SKILL
if it doesn't match
uname -a
Linux other_hostname 3.10.17 #1 SMP Wed Oct 23 16:28:33 CDT 2013 x86_64 Intel(R) Core(TM) i3-4130T CPU # 2.90GHz GenuineIntel GNU/Linux
it will pop up this error:
no tty present and no askpass program specified
Other options, not based on NOPASSWD:
Start Netbeans with root privilege ((sudo netbeans) or similar) which will presumably fork the build process with root and thus sudo will automatically succeed.
Make the operations you need to do suexec -- make them owned by root, and set mode to 4755. (This will of course let any user on the machine run them.) That way, they don't need sudo at all.
Creating virtual hard disk files with bootsectors shouldn't need sudo at all. Files are just files, and bootsectors are just data. Even the virtual machine shouldn't necessarily need root, unless you do advanced device forwarding.
Although this question is old, it is still relevant for my more or less up-to-date system. After enabling debug mode of sudo (Debug sudo /var/log/sudo_debug all#info in /etc/sudo.conf) I was pointed to /dev: "/dev is world writable". So you might need to check the tty file permissions, especially those of the directory where the tty/pts node resides in.
I was able to get this done but please make sure to follow the steps properly.
This is for the anyone who is getting import errors.
Step1: Check if files and folders have got execute permission issue.
Linux user use:
chmod 777 filename
Step2: Check which user has the permission to execute it.
Step3: open terminal type this command.
sudo visudo
add this lines to the code below
www-data ALL=(ALL) NOPASSWD:ALL
nobody ALL=(ALL) NOPASSWD:/ALL
this is to grant permission to execute the script and allow it to use all the libraries. The user generally is 'nobody' or 'www-data'.
now edit your code as
echo shell_exec('sudo -u the_user_of_the_file python your_file_name.py 2>&1');
go to terminal to check if the process is running
type this there...
ps aux | grep python
this will output all the process running in python.
Add Ons:
use the below code to check the users in your system
cut -d: -f1 /etc/passwd
Thank You!
1 open /etc/sudoers
type sudo vi /etc/sudoers. This will open your file in edit mode.
2 Add/Modify linux user
Look for the entry for Linux user. Modify as below if found or add a new line.
<USERNAME> ALL=(ALL) NOPASSWD: ALL
3 Save and Exit from edit mode
I had the same error message when I was trying to mount sshfs which required sudo : the command is something like this :
sshfs -o sftp_server="/usr/bin/sudo /usr/lib/openssh/sftp-server" user#my.server.tld:/var/www /mnt/sshfs/www
by adding the option -o debug
sshfs -o debug -o sftp_server="/usr/bin/sudo /usr/lib/openssh/sftp-server" user#my.server.tld:/var/www /mnt/sshfs/www
I had the same message of this question :
sudo: no tty present and no askpass program specified
So by reading others answer I became to make a file in /etc/sudoer.d/user on my.server.tld with :
user ALL=NOPASSWD: /usr/lib/openssh/sftp-server
and now I able to mount the drive without giving too much extra right to my user.
Below actions work for on ubuntu20
edit /etc/sudoers
visudo
or
vi /etc/sudoers
add below content
userName ALL=(ALL) NOPASSWD: ALL
%sudo ALL=(ALL:ALL) NOPASSWD:ALL
I'm not sure if this is a more recent change, but I just had this problem and sudo -S worked for me.

How to run pg_ctlcluster with CentOS?

I'm using CentOS 7 with EPEL Repo and installed Postgresql 9.6 which is a need for a webshop application. Now some propel installation script wants to execute pg_ctlcluster. The Installation ends with an error:
Exception: sudo: pg_ctlcluster: command not found
I checked /usr/pgsql-9.6/bin, there is only pg_ctl, but no pg_ctlcluster. Some said pg_ctl and pg_ctlcluster are not exactly the same. It looks like pg_ctlcluster is a Ubuntu thing. It's used for Postgres Cluster (...).
Do you have any ideas what's the best way to replace pg_ctlcluster?
Just copy/symlink pg_ctlcluster -> pg_ctl sounds not like it should be. Maybe someone have a suiteable RPM.
pg_ctlcluster is not part of core PostgreSQL, but the PGDG Debian install packages come with an additional utility command of that name.
So that propel installation script is written for Debian or Ubuntu Linux.
You'd best ask the provider of the script for a script that supports the Redhat-based Linux distrubutions.
I didnt want to overwork the whole PHP installation script, so this fix worked for me:
- $process = $this->getProcess(sprintf('sudo pg_ctlcluster %s main restart --force', $postgresVersion));
+ $process = $this->getProcess(sprintf('sudo -i -u postgres /usr/pgsql-9.6/bin/pg_ctl %s restart', NULL));
+ $process = $this->getProcess(sprintf('exit', NULL));
Not for use in productional enviroments

Can't use opkg on pre-configured embedded machine

I want to add a feature to a pre-configured embedded machine with uname -a output:
Linux asdf 3.1.10 #1 SMP PREEMPT Fri Nov 11 02:05:03 CET 2016 armv7l GNU/Linux
It uses busybox for a lot of its terminal commands and has a lot of stuff that doesn't work. It uses opkg as its package manager. I wanted to update systemd the other day and so I typed opkg update, which gave
Downloading http://www.website-of-manufacturer.com/ipk2/all/Packages.gz.
wget: bad address 'website-of-manufacturer.com:8008'
So I wanted to update the list of repositories, which should be done by editing /etc/opkg.conf if I understand correctly. But there is no such file. So after reading this I simply created it and pasted the example from the link.
But after running opkg update again, it still looks for http://www.website-of-manufacturer.com/ipk2/all/Packages.gz! What can I do to remove this repo and add others?
Edit: I also tried grep -Ril website-of-manufacturer in rootdir, but the installed version of grep doesn't support those flags so I don't even know where the configuration file is located :D
Edit: Ok find ./ -type f | xargs grep "website-of-manufacturer" actually located the file I was looking for. I guess I'll answer my own question if this works.
Since grep -r was not working, I could not find the config file. But then I tried
find ./ -type f | xargs grep "website-of-manufacturer"
which located the file containing the repository list. Neat trick for environments where grep isn't working like it should.

AWS EC2 and rvm ssh

I have created user for my AWS ec2 VPS (deployer)
When i am logging with:
ssh -i ~/.ssh/aws/*...*.pem ubuntu#ec2*...*.amazonaws.com
command rvm use 2.0.0 is working correctly
=>
ubuntu#ip-***:~$ rvm list
rvm rubies
=* ruby-2.0.0-p247 [ x86_64 ]
# => - current
# =* - current && default
# * - default
ubuntu#ip-***:~$ rvm which
ubuntu#ip-***:~$
But when i use su - deployer i have got:
deployer#ip***:/home/ubuntu$ rvm
The program 'rvm' is currently not installed. You can install it by typing:
sudo apt-get install ruby-rvm
I would like to understand how correctly write command for ssh login.
I have tried:
ssh -i ~/.ssh/aws/*.pem *ubuntu#ec2***.amazonaws.com -t 'bash --login -c "rvm"'
but received "Connection to ec2-*.amazonaws.com closed".
Within my local machine rvm functioning correctly. I have added
[[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm" # Load RVM into a shell session *as a function*
into my ~/.bash_profile
I have spent 3-5 hours studying stackoverflow topics related to this issue, but still not understand what am i doing wrong.
Any help will be highly appreciated! Thanks in advance!
I've run into this problem before and there are 2 ways to solve it.
The first way is to log in directly as the deployer user to the instance. This might mean having to create a ssh keypair (see ssh-keygen -t rsa). Then you can log in with ssh deployer#ec2.instance.address This way the rvm will be loaded directly to the deployed user's shell.
A second way is not to use the dash when su to the deployed user account.
When you use the dash then you load your own bashrc vs that particular user's bashrc.
So sudo su deployer
you nee to use:
su - deployer
it will ensure you use login shell