Build Row List dynamically using PowerShell - powershell

I have this requirement:
ListItem
--------
ABV
DEF
GED
ZAF
NOTE: ListItem is from an output of process one at a time.
foreach ($list in $listItem)
{ # Want to turn this into single row as each item get loaded
ABV,DEF,GED,ZAF
}
What I have done to solve this is to land this entries into file first before processing with the code below
$list = Get-Content -Path C:\Ftest
[string]::Join(',' , $list) | Set-Content -Path C:\FFtestFinal
What I cannot figure out is how to build the list without landing it in a file. I want to land it directory in C:\FFtestFinal with the values
ABV,DEF,GED,ZAF.


Try something like this:
$YourInput = 'ABV','DEF','GED','ZAF'
$YourInput -join ';'
Or (overall idea):
(Get-ChildItem -Filter '*.*' | Select-Object -ExpandProperty Name) -join ';'

Related

Powershell - Finding the output of get-contents and searching for all occurrences in another file using wild cards

I'm trying to get the output of two separate files although I'm stuck on the wild card or contains select-string search from file A (Names) in file B (name-rank).
The contents of file A is:
adam
george
william
assa
kate
mark
The contents of file B is:
12-march-2020,Mark-1
12-march-2020,Mark-2
12-march-2020,Mark-3
12-march-2020,william-4
12-march-2020,william-2
12-march-2020,william-7
12-march-2020,kate-54
12-march-2020,kate-12
12-march-2020,kate-44
And I need to match on every occurrence of the names after the '-' so my ordered output should look like this which is a combination of both files as the output:
mark
Mark-1
Mark-2
Mark-3
william
william-2
william-4
william-7
Kate
kate-12
kate-44
kate-54
So far I only have the following and I'd be grateful for any pointers or assistance please.
import-csv (c:\temp\names.csv) |
select-string -simplematch (import-csv c:\temp\names-rank.csv -header "Date", "RankedName" | select RankedName) |
set-content c:\temp\names-and-ranks.csv
I imagine the select-string isn't going to be enough and I need to write a loop instead.

The data you give in the example does not give you much to work with, and the desired output is not that intuitive, most of the time with Powershell you would like to combine the data in to a much richer output at the end.
But anyway, with what is given here and what you want, the code bellow will get what you need, I have left comments in the code for you
$pathDir='C:\Users\myUser\Downloads\trash'
$names="$pathDir\names.csv"
$namesRank="$pathDir\names-rank.csv"
$nameImport = Import-Csv -Path $names -Header names
$nameRankImport= Import-Csv -Path $namesRank -Header date,rankName
#create an empty array to collect the result
$list=#()
foreach($name in $nameImport){
#get all the match names
$match=$nameRankImport.RankName -like "$($name.names)*"
#add the name from the First list
$list+=($name.names)
#if there are any matches, add them too
if($match){
$list+=$match
}
}
#Because its a one column string, Export-CSV will now show us what we want
$list | Set-Content -Path "$pathDir\names-and-ranks.csv" -Force

For this I would use a combination of Group-Object and Where-Object to first group all "RankedName" items by the name before the dash, then filter on those names to be part of the names we got from the 'names.csv' file and output the properties you need.
# read the names from the file as string array
$names = Get-Content -Path 'c:\temp\names.csv' # just a list of names, so really not a CSV
# import the CSV file and loop through
Import-Csv -Path 'c:\temp\names-rank.csv' -Header "Date", "RankedName" |
Group-Object { ($_.RankedName -split '-')[0] } | # group on the name before the dash in the 'RankedName' property
Where-Object { $_.Name -in $names } | # use only the groups that have a name that can be found in the $names array
ForEach-Object {
$_.Name # output the group name (which is one of the $names)
$_.Group.RankedName -join [environment]::NewLine # output the group's 'RankedName' property joined with a newline
} |
Set-Content -Path 'c:\temp\names-and-ranks.csv'
Output:
Mark
Mark-1
Mark-2
Mark-3
william
william-4
william-2
william-7
kate
kate-54
kate-12
kate-44

Powershell: delete duplicate entry in arraylist

In my Powershellscript I read some data from a csv-File in an Arraylist.
In the second step I eliminate every line without the specific char: (.
At the third step I want to eliminate every double entries.
Example for my list:
Klein, Jürgen (Klein01); salesmanagement national
Klein, Jürgen (Klein01); salesmanagement national
Meyer, Gerlinde (Meyer02); accounting
Testuser
Admin1
Müller, Kai (Muell04); support international
I use the following script:
$Arrayusername = New-Object System.Collections.ArrayList
$NewArraylistuser = New-Object System.Collections.ArrayList
$Arrayusername = Get-Content -Path "C:\Temp\User\Userlist.csv"
for ($i=0; $i -le $Arrayusername.length; $i++)
{
if ($Arrayusername[$i] -like "*(*")
{
$NewArraylistuser.Add($Arrayusername_ads[$i])
}
$Array_sorted = $NewArraylistuser | sort
$Array_sorted | Get-Unique
}
But the variable $Array_sorted still has double entries.
I don´t find the mistake.

Some Ideas how you could change your code:
Use the existing Command to import .csv files with the Delimiter ;.
Filter the output with Where-Object to only include Names with (.
Select only unique objects with Select-Object, or if you want to sort the Object, use the Sort-Object with the same paramets.
Something like this should work:
Import-csv -Delimiter ';' -Header "Name","Position" -Path "C:\Temp\User\Userlist.csv" | Where-Object {$_.Name -like "*(*"} | Sort-Object -Unique -Property Name,Position

Powershell, Loop through CSV files and search for a string in a row, then Export

I have a directory on a server called 'servername'. In that directory, I have subdirectories whose name is a date. In those date directories, I have about 150 .csv file audit logs.
I have a partially working script that starts from inside the date directory, enumerates and loops through the .csv's and searches for a string in a column. Im trying to get it to export the row for each match then go on to the next file.
$files = Get-ChildItem '\\servername\volume\dir1\audit\serverbeingaudited\20180525'
ForEach ($file in $files) {
$Result = If (import-csv $file.FullName | Where {$_.'path/from' -like "*01May18.xlsx*"})
{
$result | Export-CSV -Path c:\temp\output.csv -Append}
}
What I am doing is searching the 'path\from' column for a string - like a file name. The column contains data that is always some form of \folder\folder\folder\filename.xls. I am searching for a specific filename and for all instances of that file name in that column in that file.
My issue is getting that row exported - export.csv is always empty. Id also like to start a directory 'up' and go through each date directory, parse, export, then go on to the next directory and files.
If I break it down to just one file and get it out of the IF it seems to give me a result so I think im getting something wrong in the IF or For-each but apparently thats above my paygrade - cant figure it out....
Thanks in advance for any assistance,
RichardX

The issue is your If block, when you say $Result = If () {$Result | ...} you are saying that the new $Result is equal what's returned from the if statement. Since $Result hasn't been defined yet, this is $Result = If () {$null | ...} which is why you are getting a blank line.
The If block isn't even needed. you filter your csv with Where-Object already, just keep passing those objects down the pipeline to the export.
Since it sounds like you are just running this against all the child folders of the parent, sounds like you could just use the -Recurse parameter of Get-ChildItem
Get-ChildItem '\\servername\volume\dir1\audit\serverbeingaudited\' -Recurse |
ForEach-Object {
Import-csv $_.FullName |
Where-Object {$_.'path/from' -like "*01May18.xlsx*"}
} | Export-CSV -Path c:\temp\output.csv
(I used a ForEach-Object loop rather than foreach just demonstrate objects being passed down the pipeline in another way)
Edit: Removed append per Bill_Stewart's suggestion. Will write out all entries for the the recursed folders in the run. Will overwrite on next run.

I don't see a need for appending the CSV file? How about:
Get-ChildItem '\\servername\volume\dir1\audit\serverbeingaudited\20180525' | ForEach-Object {
Import-Csv $_.FullName | Where-Object { $_.'path/from' -like '*01May18.xlsx*' }
} | Export-Csv 'C:\Temp\Output.csv' -NoTypeInformation

Assuming your CSVs are in the same format and that your search text is not likely to be present in any other columns you could use a Select-String instead of Import-Csv. So instead of converting string to object and back to string again, you can just process as strings. You would need to add an additional line to fake the header row, something like this:
$files = Get-ChildItem '\\servername\volume\dir1\audit\serverbeingaudited\20180525'
$result = #()
$result += Get-Content $files[0] -TotalCount 1
$result += ($files | Select-String -Pattern '01May18\.xlsx').Line
$result | Out-File 'c:\temp\output.csv'

How to solve the "'IndexOf'." error in PowerShell script

While running the below script I am getting an error:
"Method invocation failed because [System.Management.Automation.PSCustomObject] doesn't contain a method named 'IndexOf'".
Please help me to find out a solution to avoid the above error while running the below script.
Code:
$serverlist_csv1 = Import-Csv -Path $file1
$serverlist_temp1 = $serverlist_csv1
$exclude_serverlist_csv = Import-Csv -Path $file2
foreach ($server in $exclude_serverlist_csv) {
$servers1 = ($serverlist_csv1.'SourceHostName' | Select-Object -ExcludeProperty 'SourceHostName')
if ($servers1 -contains $server.'Exclude Server') {
$server_object1 = ($serverlist_csv1 | Where-Object {$_.SourceHostName -eq $server.'Exclude Server'})
$serverindex1 = $serverlist_csv1.IndexOf($server_object1)
$dataResizable1 = {$serverlist_csv1}.Invoke()
$dataResizable1.RemoveAt($serverindex1)
$serverlist_csv1 = $dataResizable1
}
}

You are getting that error because you used select-object on the pipeline invocation of $serverlist_csv1, which creates a layer over the object effectively creating a new object a pscustomobject and that makes it lose the indexOf() method.
if you avoid this step and instead try for instance to exclude that on the import of the csv or modify the member to nothing if that property isn't necessary to you. The point is like people before me said that does not seem like the better way to solve whatever problem this is.

Build a list of the server names from the second file:
$exclude = Import-Csv $file2 | Select-Object -Expand 'Exclude Server'
Then filter the first file for rows whose SourceHostName column isn't one of those names and write the result back to a file:
Import-Csv $file1 | Where-Object {
$exclude -notcontains $_.SourceHostName
} | Export-Csv 'C:\output.csv' -NoType

Append existing column in csv by matching values with array and with condition

I will do my best to break this down as simply as I can.
what I have so far that is working:
Currently I have two csv files...
test1.csv
test1ColumnN,test1ColumnI,test1ColumnD,selectDomainOne,selectDomainTwo,selectDomainThree
asdf,asdf,asdf,,,
nValue1,iValue1,dValue1,sValue1,,
qwer,asdf,zxcv,,,
nValue2,iValue2,dValue2,,,
qwer,zxcv,asdf,lkjh,,
nValue3,iValue3,dValue3,sValue3,,
zxcv,qwer,asdf,,poiu,
nValue1,iValue1,dValue1,,sValue1,
nValue4,iValue4,dValue4,,sValue4,
asdf,qwer,zxcv,fghj,mnbv,
nValue5,iValue5,dValue5,,,
asdf,cvbn,erty,,,uytr
nValue7,iValue7,dValue7,,,sValue7
nValue8,iValue8,dValue8,,,sValue8
nValue9,iValue9,dValue9,,,sValue9
qwer,asdf,zxcv,poiu,lkjh,mnbv
test2.csv
DomainCatagories,test2ColumnS,test2ColumnA,test2ColumnN,test2ColumnI,test2ColumnD
DomainOne,sValue1,aValue1,nValue1,,dValueN
DomainOne,sValue2,aValue2,,iValue2,dValue2
DomainOne,sValue3,aValue2,nValue3,iValue3,dValue3
DomainTwo,sValue1,aValue2,,iValue1,dValueN
DomainTwo,sValue4,aValue1,nValue4,,dValueN
DomainTwo,sValue5,aValue1,nValue5,iValue5,dValue5
DomainThree,sValue7,aValue2,nValue7,iValue7,dValue7
DomainThree,sValue8,aValue1,nValue8,iValue8,dValue8
DomainThree,sValue9,aValue2,nValue9,iValue9,dValue9
Now I want to add a column (inside test2.csv) to match the sValue# from both test1.csv and test2.csv with the condition of ($_.DomainCatagories='DomainOne' from test2.csv) and ($_.selectDomainOne from test1.csv)
To do this, I am using the following code...
#Create Column
$domainNameOne = #{}
$domainNameOne = Import-Csv 'C:\Scripts\Tests\test1.csv' | Where-Object {$_.selectDomainOne} | Select-Object -Expand 'selectDomainOne'
(Import-Csv 'C:\Scripts\Tests\test2.csv') |
Select-Object -Property *, #{n='Test1sValues';e={
if($_.DomainCatagories -eq 'DomainOne'){
if(($domainNameOne -contains $_.test2ColumnS) -and ($_.test2ColumnS)){
$_.test2ColumnS
} Else {
'Not found in test1'
}}}} | Export-Csv "C:\Scripts\Tests\test2-Temp" -NoType
Move-Item "C:\Scripts\Tests\test2-Temp" 'C:\Scripts\Tests\test2.csv' -Force
After the code is run, I get the following test2.csv (isCorrect)...
"DomainCatagories","test2ColumnS","test2ColumnA","test2ColumnN","test2ColumnI","test2ColumnD","Test1sValues"
"DomainOne","sValue1","aValue1","nValue1","","dValueN","sValue1"
"DomainOne","sValue2","aValue2","","iValue2","dValue2","Not found in test1"
"DomainOne","sValue3","aValue2","nValue3","iValue3","dValue3","sValue3"
"DomainTwo","sValue1","aValue2","","iValue1","dValueN",""
"DomainTwo","sValue4","aValue1","nValue4","","dValueN",""
"DomainTwo","sValue5","aValue1","nValue5","iValue5","dValue5",""
"DomainThree","sValue7","aValue2","nValue7","iValue7","dValue7",""
"DomainThree","sValue8","aValue1","nValue8","iValue8","dValue8",""
"DomainThree","sValue9","aValue2","nValue9","iValue9","dValue9",""
What I have that is not working:
Next I run the following code...
#Append Column
$domainNameThree = #{}
$domainNameThree = Import-Csv 'C:\Scripts\Tests\test1.csv' | Where-Object {$_.selectDomainThree} | Select-Object -Expand 'selectDomainThree'
(Import-Csv 'C:\Scripts\Tests\test2.csv') | % {
if($_.DomainCatagories -eq 'DomainThree'){
if(($domainNameThree -contains $_.test2ColumnS) -and ($_.test2ColumnS)){
$_.Test1sValues = $_.test2ColumnS
} Else {
$_.Test1sValues = 'Not found in test1'
}}} | Export-Csv "C:\Scripts\Tests\test2-Temp" -NoType
Move-Item "C:\Scripts\Tests\test2-Temp" 'C:\Scripts\Tests\test2.csv' -Force
Instead of adding the values in the correct rows, it completely blanks out the whole file and saves it as an empty file.
End Goal
What I want the code to produce, is this (notice values filled in on last 3 rows in the last column)...
"DomainCatagories","test2ColumnS","test2ColumnA","test2ColumnN","test2ColumnI","test2ColumnD","Test1sValues"
"DomainOne","sValue1","aValue1","nValue1","","dValueN","sValue1"
"DomainOne","sValue2","aValue2","","iValue2","dValue2","Not found in test1"
"DomainOne","sValue3","aValue2","nValue3","iValue3","dValue3","sValue3"
"DomainTwo","sValue1","aValue2","","iValue1","dValueN",""
"DomainTwo","sValue4","aValue1","nValue4","","dValueN",""
"DomainTwo","sValue5","aValue1","nValue5","iValue5","dValue5",""
"DomainThree","sValue7","aValue2","nValue7","iValue7","dValue7","sValue7"
"DomainThree","sValue8","aValue1","nValue8","iValue8","dValue8","sValue8"
"DomainThree","sValue9","aValue2","nValue9","iValue9","dValue9","sValue9"
What am I doing wrong in that 2nd code snippet?

The example you show from What I have that is not working: is missing a key portion. Export-Csv will take everything piped into it to populate the CSV but you are not providing any.
Problem is that you are not passing anything through the pipe. Merely just updating one property. The simplest thing to do is add $_ after the if statement. Or you could just use a calculated property which you have done before in another one of your questions. The example below from Compare dates with different formats in csv file even uses an if statement.
Import-Csv $csvFile | Select-Object *, #{n='MatchDates';e={ if((([datetime]$_.Date1).Date -eq $_.Date3) -and (([datetime]$_.Date2).Date -eq $_.Date3) -and (([datetime]$_.Date1).Date -eq $_.Date2)){ 'Match Found' }Else{ 'No Match Found' }}} |
Export-Csv "$csvFile-results.csv" -NoTypeInformation -Force