In Maya, when running a Python script, the script editor is reporting back every time the script select and unselects something. It is messy and I would rather have that happen under the hood. Is there a way for the script editor to not report those commands, and can I have my script turn the option off in the editor before running?
Yes, I am the author of the script. I believe it to be a Maya issue. It will report certain actions and you can't turn it off.
That sounds a little odd... do you happen to have echo all commands turned on in the script editor?
The only other thing I can think of is that the script may be explicitly running print statements - do you have access to the source code so you can comment out any print lines?
Edit:
If you wrote it, maybe you could tweak the code to no longer require selection. There are really very few Maya commands that actually require selection - they work with selection, but also allow you to explicitly provide node names... most commands also return node names that you can capture into a variable.
If you are no longer selecting/deselecting things in your script, it shouldn't clutter your script editor output with those prints anymore.
Related
Before you answer, I'm not looking for the functionality of ; to suppress command line printing.
I have a set of scripts which are not mine and I do not have the ability to change. However, in my scripts I make a call to these other scripts through evalin('base', 'scriptName'). Unfortunately, these other scripts do a lot of unnecessary and ugly printing to the command window that I don't want to see. Without being able to edit these other scripts, I would like a way to suppress output to the command line for the time that these other scripts are executing.
One potential answer was to use evalc, but when I try evalc(evalin('base', 'scriptName')) MATLAB throws an error complaining that it cannot execute a script as a function. I'm hoping there's something like the ability to disable command window printing or else redirecting all output to some null file much like /dev/null in unix.
I think you just need to turn the argument in your evalc example into a string:
evalc('evalin(''base'', ''scriptName'')');
Have you tried this solution
here ?
echo off;
I don't know if it will fit your needs, but another solution can be to open a new session of Matlab, and use there only minimized -nodesktop form (-just the command window). You can run from there the annoying scripts, and work on the main session as usual.
The problem here is that the sessions can't be synchronized, so if you need to work with the results of the scripts all the time, it'll be a little bit complicated. Maybe you can save the result to disk, than call it from the main session...
But it mainly depends on your workflow with those scripts.
So I'm writing Python with IDLE and my usual workflow is to have two windows (an editor and a console), and run my script with F5 to quickly test it.
My script has some non-optional command line parameters, and I have two conflicting desires:
If someone launches my script without passing any parameters, I'd like him to get an error telling him to do so (argparse does this well)
When I hit F5 in IDLE, I'd like to have my script run with dummy parameters (and I don't want to have more keystrokes than F5 to have this work, and I don't want to have a piece of code I have to remember to remove when I'm not debugging any more)
So far my solution has been that if I get no parameters, I look for a params.debug file (that's not under source control), and if so, take that as default params, but it's a bit ugly... so would there be a cleaner, more "standard" solution to this? Do other IDEs offer easier ways of doing this?
Other solutions I can think of: environment variables, having a separate "launcher" script that's the one taking the "official" parameters.
(I'm likely to try out another IDE anyway)
With some editors you can define the 'execute' command,
For example with Geany, for Python files, F5 is python2.7 %f. That could be modified to something like python2.7 %f dummy parameters. But I use an attached terminal window and its line history more than F5 like commands.
I'm an Ipython user, so don't remember much about the IDLE configuration. In Ipython I usually use the %run magic, which is more like invoking the script from a shell than from an IDE. Ipython also has a better previous line history than the shell.
For larger scripts I like to put the guts of the code (classes, functions) in one file, and test code in the if __name__ block. The user interface is in another file that imports this core module.
Thanks for your question. I also searched for a way to do this. I found that Spyder which is the IDE I use has an option under Run/Configure to enter the command line parameters for running the program. You can even configure different ones for the different editors you have open.
Python tracker issue 5680 is a proposal to add to Idle a way to set command lines args for F5 Run module. You are free to test any of the proposed patches if you are able to apply them.
In the meanwhile conditionally extending sys.argv as done below should fulfill your requirements.
import sys
in __name__ == '__main__':
if 'idlelib.PyShell' in sys.modules:
sys.argv.extend(('a', '-2')) # add your argments here.
print(sys.argv) # in use, parse sys.argv after extending it
# ['C:\\Programs\\python34\\tem.py', 'a', '-2']
I have a lot of if statements throughout my code and was wondering if there is anyway in Matlab to see which if statements are being used when I run my code. I know I could put variables throughout my code and see which ones are being triggered, but I was wondering if there is an easier way. Maybe a built in MATLAB function or something.
Thanks
Type profile viewer in the command line of matlab and execute your code from there. There you can see in the profile report how many times each line is called as well as how long it takes executing the line of code.
More information:
http://www.mathworks.nl/help/matlab/ref/profile.html
http://www.mathworks.nl/help/matlab/matlab_prog/profiling-for-improving-performance.html
To answer precesely to your question, there is a command to log every line the execution is going through. And if you're familiar with unix-like platform, it is the same command: echo. See the Matlab help of echo to see how you can use it. For example, echo on all sets echoing on for all function files.
Besides that, I advise you two things better than analysing the output of echoing a whole script:
look at every warning in the code editor, and apply meaningful corrections.
use the profiler of matlab, as stated in the answer from EJG89, it is indeed a powerful tool!
I'm a Perl programmer doing some web application testing using Selenium. I was wondering if there's some kind of interactive interpreter which would allow me to type Selenium commands at a prompt and have them sent to selenium.
The way I'm currently developing code is to type all of the commands into a Perl script, and then execute the script. This make the development process painfully slow, because it makes it necessary to rerun the entire script whenever I make a change.
(If I were a Ruby programmer, I bet the Interactive Ruby Shell could help with this, but I'm hoping to find a solution for Perl.) Thanks!
The Java-based SeleniumServer has an --interactive mode.
I don't know about a Selenium shell, but if you are looking for a Perl REPL, there are modules such as Devel::REPL and Carp::REPL. I've made shells for various simple things using my Polyglot module, although I haven't looked at that in awhile.
May I ask why it's "necessary to re-run the entire script"? Since your solution is an interactive shell, i'm assuming that it's NOT because you need previous commands to set something up. If that's a correct assumption, simply make your set of Selenium commands in Perl script in such a way that you can skip the first N commands.
You can do it by explicit "if" wrappers.
Or you can have a generic "call a Selenium command based on a config hash" driver executed in a loop, and adding the config hash for every single Selenum command to an array of hashes.
Then you can either have an input parameter to the test script that refers to a # in an array; or you can even include unique labels for each test as a part of a config hash and pass "start with test named X" or even "only do test named X" as input on command line.
Hi I am using a perl script written by another person who is no longer in the company.
If I run the script as a stand alone, then the output are as expected. But when I call the script from another code repeatedly, the output is wrong except for the first time.
I suspect some variables are not initialised properly. When it is called standalone, each time it exits and all the variable values are initialised to defaults. But when called from another perl script, the modules and the variable values are probably carried over to the next call of the script.
Is there any way to flush out the called script from memory before I call it next time?
I tried enabling warning and it was throwing up 1000s of lines of warning...!
EDIT: How I am calling the other script:
The code looks like this:
do "processing.pl";
...
...
...
process(params); #A function in processing.pl
...
...
...
If you want to force the module to be reloaded, delete its entry from %INC and then reload it.
For example:
sub reload_module {
delete $INC{'Your/Silly/Module.pm'};
require Your::Silly::Module;
Your::Silly::Module->import;
}
Note that if this module relies on globals in other modules being set, those may need to be reloaded as well. There's no easy way to know without taking a peak at the code.
Hi I am using a perl script written by another person who is no longer in the company.
I tried enabling warning and it was throwing up 1000s of lines of warning...!
There's your problem right there. The script was not written properly, and should be rewritten.
Ask yourself this question: if it has 1000s of warnings when you enable strict checking, how can you be sure that it is doing the right thing? How can you be sure that it is not clobbering files, trashing data sets, making a mess of your filesystem? Chances are it is doing all of these things, either deliberately or accidentally.
I wouldn't trust running an error-filled script written by someone no longer with the company. I'd rewrite it and be sure that it was doing what I needed it to do.
Unloading a module is a more difficult task than simply removing the %INC entry of the module. Take a look at Class::Unload from CPAN.
If you don't want to rewrite/fix the script, I suggest calling the script via exec() or one of its varieties. While it is not very elegant to do, it will definitely fix your problem.
Are you sure that you need to reload the module? By using do, you are reading the source every time and executing it. What happens if you change that to require, which will only read and evaluate the source once?
Another possibility (just thinking aloud here) could be to do with the local directory? Are they running from the same place. Probably wouldn't work the first time though.
Another option is to use system ('doprocessing.pl');. Lazily, we do this with a few scripts to force re-initialisation of a number of classes/variables etc. And to force the log files to rotate properly.
edit: I have just re-read your question, and it would appear that you are not calling it like this.