I'm trying to add the filename of a text file into the first line of a the same text file. for example if the file name is called test1.txt, then the first line when you open the file should be test1.
below is what I've done so for, the only problem i have is that the word "$file" is being written to the file not the file name. any help is appreciated.
for file in *.txt; do
sed -i '1 i\$file' $file;
awk 'sub("$", "\r")' "$file" > "$file"1;
mv "$file"1 "$file";
done
Without concise, testable sample input and expected output it's an untested guess but it SOUNDS like all you need is:
awk -i inplace -v ORS='\r\n' 'FNR==1{print FILENAME}1' *
No shell loop or multiple commands required.
The above uses GNU awk for inplace editing and I'm assuming the sub() in your code was intended to add a \r at the end of every line.
I've just started learning more about sed and awk and put this into a file called insert.sed and sourced it and passed it a file name:
sed -i '1s/^./'$1'\'$'\n/g' $1
In trying it, it seems to work okay:
rent$ cat x.txt
<<< Who are you?
rent$ source insert.sed x.txt
rent$ cat x.txt
x.txt
<< Who are you?
It is cutting off the first character of the first line so I'd have to fix that otherwise it does add the file name to first line.
I'm sure there's better ways of doing it.
If you want test1 on first line, with gnu sed
sed -i '1{x;s/.*/fich=$(ps -p $PPID -o args=);fich=${fich##*\\} };echo ${fich%%.*}/e;G}' test1.txt
Related
I have a folder of 500 *.INI files that I need to manually edit. Within each INI file, I have the line Source =. I would like that line to become Source = C:\software\{filename}.
For instance, a dx4.ini file would need to be fixed to become: Source = C:\software\dx4
Is there a quick way to do this with Find, Grep, or Sed functions?
You can try with sed
For example
Input file contents:
file.txt
Source =
some lines..
script:
newstring='Source = C:\software\dx4'
oldstring='Source ='
echo `sed "s/$oldstring/$newstring/g" file.txt` > file.txt
After running the above commands
output:
Source = C:\software\dx4
some lines..
If you want to edit a file in a script, I think ed is the way to go. Combined with a shell for loop:
for file in *.INI; do
base=$(basename "$file" .INI)
ed -s "$file" <<EOF
/^Source =/s/=/= C:\\\\software\\\\$base/
w
EOF
done
(This does assume that filenames will not have newlines or ampersands in their names)
With GNU awk for the 3rd arg to match(), gensub(), and "inplace" editing:
awk -i inplace '
match($0,/(.*Source = C:\\software\\){filename}(.*)/,a) {
fname = gensub(/\..*/,"",1,FILENAME)
$0 = a[1] fname a[2]
}
1' *.INI
The above assumes you're running in a UNIX environment though your use of the term folder instead of directory and that path starting with C: and containing backslashes makes me suspicious. If you're on Windows then save the part between the 2 's (exclusive) in a file named foo.awk and execute it as awk -i inplace foo.awk *.INI or however it is you normally execute commands like this in Windows.
find *.ini -type -f > stack
while read line
do
sed -i s"#Source =#Source = C:\\software\\dx4#" "${line}"
done < stack
Assuming that a} You have sed with "-i" (the insert flag, which AFAIK is not always portable) and b} sed doesn't crap itself about a double escape sequence, I think that will work.
i have several files in which i want to replace a certain word with the name of the file itself..
for example i have 2 files named test1.txt and test2.txt
both files are equal and look like
bla1,bla2,temp
bla2,bla3,temp
with the sed i want to replace the word temp with the name of the file itself
so after the sed operation i have 2 different files
test1.txt , which looks like :
bla1,bla2,test1
bla2,bla3,test1
test2.txt, which looks like :
bla1,bla2,test2
bla2,bla3,test2
so my question ... how do i use the actual name of the input file itself as part of the replace command?
sed "s/temp/ ??filename??/ ??? " *.txt
thanks for your suggestions
I'm not sure you can reference the filename using sed although I could be wrong. You would probably use a shell hack. A better aproach to substitute all occurrences of temp with the filename would be the following awk script:
$ awk '{gsub(/temp/,FILENAME)}1' file
use awk, awk has FILENAME variable:
awk '{sub(/temp/,FILENAME)}7' yourfile
awk 'BEGIN{FS=OFS=","} {$NF=FILENAME}1' file
The difference between this and the sub() solutions is that this will work even if the word "temp" exists elsewhere in your file, e.g. if "bla1" contains the word "temperature".
If you need to strip ".txt" from the file name as it appears from your posted desired output, tweak it to:
awk 'BEGIN{FS=OFS=","} {t=FILENAME; sub(/\.txt$/,"",t); $NF=t}1' file
You can probably edit FILENAME itself but I find it best not to mess with the builtin variables if you don't have to.
You could do it with a little bit of bash to help you out, if that's available.
find . -name "test*.txt" -type f | awk -F '/' '{print $2;}' | while read file; do sed -i "s|temp|$file|" ./$file; done
That's a kind of hacky adaptation of a script I have to do something similar. It can undoubtedly be shortened.
no sed internal variable for the file name so you need some previous batch command for a generic process
for FileName in MyFileShellFilter
do
cat <> ${FileName} | sed "s|,temp$|,${FileName}|"
done
just be carrefull with file name used, they normaly don't have \ but could have & that are s// special meaning. I use | as separator to allow / in file name but for this reason, no unescaped | are allowed in file name (normaly not)
with xargs:
printf "%s\n" *.txt | xargs -I FILE -L 1 sed 's/temp/FILE/' FILE
The filename cannot have: newlines, slashes, ampersand, single quote.
I'm on Linux command line and I have file with
127.0.0.1
128.0.0.0
121.121.33.111
I want
127.0.0.1:80
128.0.0.0:80
121.121.33.111:80
I remember my colleagues were using sed for that, but after reading sed manual still not clear how to do it on command line?
You could try using something like:
sed -n 's/$/:80/' ips.txt > new-ips.txt
Provided that your file format is just as you have described in your question.
The s/// substitution command matches (finds) the end of each line in your file (using the $ character) and then appends (replaces) the :80 to the end of each line. The ips.txt file is your input file... and new-ips.txt is your newly-created file (the final result of your changes.)
Also, if you have a list of IP numbers that happen to have port numbers attached already, (as noted by Vlad and as given by aragaer,) you could try using something like:
sed '/:[0-9]*$/ ! s/$/:80/' ips.txt > new-ips.txt
So, for example, if your input file looked something like this (note the :80):
127.0.0.1
128.0.0.0:80
121.121.33.111
The final result would look something like this:
127.0.0.1:80
128.0.0.0:80
121.121.33.111:80
Concise version of the sed command:
sed -i s/$/:80/ file.txt
Explanation:
sed stream editor
-i in-place (edit file in place)
s substitution command
/replacement_from_reg_exp/replacement_to_text/ statement
$ matches the end of line (replacement_from_reg_exp)
:80 text you want to add at the end of every line (replacement_to_text)
file.txt the file name
How can this be achieved without modifying the original file?
If you want to leave the original file unchanged and have the results in another file, then give up -i option and add the redirection (>) to another file:
sed s/$/:80/ file.txt > another_file.txt
sed 's/.*/&:80/' abcd.txt >abcde.txt
If you'd like to add text at the end of each line in-place (in the same file), you can use -i parameter, for example:
sed -i'.bak' 's/$/:80/' foo.txt
However -i option is non-standard Unix extension and may not be available on all operating systems.
So you can consider using ex (which is equivalent to vi -e/vim -e):
ex +"%s/$/:80/g" -cwq foo.txt
which will add :80 to each line, but sometimes it can append it to blank lines.
So better method is to check if the line actually contain any number, and then append it, for example:
ex +"g/[0-9]/s/$/:80/g" -cwq foo.txt
If the file has more complex format, consider using proper regex, instead of [0-9].
You can also achieve this using the backreference technique
sed -i.bak 's/\(.*\)/\1:80/' foo.txt
You can also use with awk like this
awk '{print $0":80"}' foo.txt > tmp && mv tmp foo.txt
Using a text editor, check for ^M (control-M, or carriage return) at the end of each line. You will need to remove them first, then append the additional text at the end of the line.
sed -i 's|^M||g' ips.txt
sed -i 's|$|:80|g' ips.txt
sed -i 's/$/,/g' foo.txt
I do this quite often to add a comma to the end of an output so I can just easily copy and paste it into a Python(or your fav lang) array
I have a CSV. I want to edit the 35th field of the CSV and write the change back to the 35th field. This is what I am doing on bash:
awk -F "," '{print $35}' test.csv | sed -i 's/^0/+91/g'
so, I am pulling the 35th entry using awk and then replacing the "0" in the starting position in the string with "+91". This one works perfet and I get desired output on the console.
Now I want this new entry to get written in the file. I am thinking of sed's "in -place" replacement feature but this fetuare needs and input file. In above command, I cannot provide input file because my primary command is awk and sed is taking the input from awk.
Thanks.
You should choose one of the two tools. As for sed, it can be done as follows:
sed -ri 's/^(([^,]*,){34})0([^,]*)/\1+91\3/' test.csv
Not sure about awk, but #shellter's comment might help with that.
The in-place feature of sed is misnamed, as it does not edit the file in place. Instead, it creates a new file with the same name. eg:
$ echo foo > foo
$ ln -f foo bar
$ ls -i foo bar # These are the same file
797325 bar 797325 foo
$ echo new-text > foo # Changes bar
$ cat bar
new-text
$ printf '/new/s//newer\nw\nq\n' | ed foo # Edit foo "in-place"; changes bar
9
newer-text
11
$ cat bar
newer-text
$ ls -i foo bar # Still the same file
797325 bar 797325 foo
$ sed -i s/new/newer/ foo # Does not edit in-place; creates a new file
$ ls -i foo bar
797325 bar 792722 foo
Since sed is not actually editing the file in place, but writing a new file and then renaming it to the old file, you might as well do the same.
awk ... test.csv | sed ... > test.csv.1 && mv test.csv.1 test.csv
There is the misperception that using sed -i somehow avoids the creation of the temporary file. It does not. It just hides the fact from you. Sometimes abstraction is a good thing, but other times it is unnecessary obfuscation. In the case of sed -i, it is the latter. The shell is really good at file manipulation. Use it as intended. If you do need to edit a file in place, don't use the streaming version of ed; just use ed
So, it turned out there are numerous ways to do it. I got it working with sed as below:
sed -i 's/0\([0-9]\{10\}\)/\+91\1/g' test.csv
But this is little tricky as it will edit any entry which matches the criteria. however in my case, It is working fine.
Similar implementation of above logic in perl:
perl -p -i -e 's/\b0(\d{10})\b/\+91$1/g;' test.csv
Again, same caveat as mentioned above.
More precise way of doing it as shown by Lev Levitsky because it will operate specifically on the 35th field
sed -ri 's/^(([^,]*,){34})0([^,]*)/\1+91\3/g' test.csv
For more complex situations, I will have to consider using any of the csv modules of perl.
Thanks everyone for your time and input. I surely know more about sed/awk after reading your replies.
This might work for you:
sed -i 's/[^,]*/+91/35' test.csv
EDIT:
To replace the leading zero in the 35th field:
sed 'h;s/[^,]*/\n&/35;/\n0/!{x;b};s//+91/' test.csv
or more simply:
|sed 's/^\(\([^,]*,\)\{34\}\)0/\1+91/' test.csv
If you have moreutils installed, you can simply use the sponge tool:
awk -F "," '{print $35}' test.csv | sed -i 's/^0/+91/g' | sponge test.csv
sponge soaks up the input, closes the input pipe (stdin) and, only then, opens and writes to the test.csv file.
As of 2015, moreutils is available in package repositories of several major Linux distributions, such as Arch Linux, Debian and Ubuntu.
Another perl solution to edit the 35th field in-place:
perl -i -F, -lane '$F[34] =~ s/^0/+91/; print join ",",#F' test.csv
These command-line options are used:
-i edit the file in-place
-n loop around every line of the input file
-l removes newlines before processing, and adds them back in afterwards
-a autosplit mode – split input lines into the #F array. Defaults to splitting on whitespace.
-e execute the perl code
-F autosplit modifier, in this case splits on ,
#F is the array of words in each line, indexed starting with 0
$F[34] is the 35 element of the array
s/^0/+91/ does the substitution
I have a file that contains this kind of paths:
C:\bad\foo.c
C:\good\foo.c
C:\good\bar\foo.c
C:\good\bar\[variable subdir count]\foo.c
And I would like to get the following file:
C:\bad\foo.c
C:/good/foo.c
C:/good/bar/foo.c
C:/good/bar/[variable subdir count]/foo.c
Note that the non matching path should not be modified.
I know how to do this with sed for a fixed number of subdir, but a variable number is giving me trouble. Actually, I would have to use many s/x/y/ expressions (as many as the max depth... not very elegant).
May be with awk, but this kind of magic is beyond my skills.
FYI, I need this trick to correct some gcov binary files on a cygwin platform.
I am dealing with binary files; therefore, I might have the following kind of data:
bindata\bindata%bindataC:\good\foo.c
which should be translated as:
bindata\bindata%bindataC:/good/foo.c
The first \ must not be translated, despite that it is on the same line.
However, I have just checked my .gcno files while editing this text and it looks like all the paths are flanked with zeros, so most of the answers below should fit.
sed -e '/^C:\\good/ s/\\/\//g' input_file.txt
I would recommend you look into the cygpath utility, which converts path names from one format to another. For instance on my machine:
$ cygpath `pwd`
/home/jericson
$ cygpath -w `pwd`
D:\root\home\jericson
$ cygpath -m `pwd`
D:/root/home/jericson
Here's a Perl implementation of what you asked for:
$ echo 'C:\bad\foo.c
C:\good\foo.c
C:\good\bar\foo.c
C:\good\bar\[variable subdir count]\foo.c' | perl -pe 's|\\|/|g if /good/'
C:\bad\foo.c
C:/good/foo.c
C:/good/bar/foo.c
C:/good/bar/[variable subdir count]/foo.c
It works directly with the string, so it will work anywhere. You could combine it with cygpath, but it only works on machines that have that path:
perl -pe '$_ = `cygpath -m $_` if /good/'
(Since I don't have C:\good on my machine, I get output like C:goodfoo.c. If you use a real path on your machine, it ought to work correctly.)
You want to substitute '/' for all '\' but only on the lines that match the good directory path. Both sed and awk will let you do this by having a LHS (matching) expression that only picks the lines with the right path.
A trivial sed script to do this would look like:
/[Cc]:\\good/ s/\\/\//g
For a file:
c:\bad\foo
c:\bad\foo\bar
c:\good\foo
c:\good\foo\bar
You will get the output below:
c:\bad\foo
c:\bad\foo\bar
c:/good/foo
c:/good/foo/bar
Here's how I would do it in awk:
# fixpaths.awk
/C:\\good/ {
gsub(/\\/,"/",$1);
print $1 >> outfile;
}
Then run it using the command:
awk -f fixpaths.awk paths.txt; mv outfile paths.txt
Or with some help from good ol' Bash:
#!/bin/bash
cat file | while read LINE
do
if <bad_condition>
then
echo "$LINE" >> newfile
else
echo "$LINE" | sed -e "s/\\/\//g" >> newfile
fi
done
try this
sed -re '/\\good\\/ s/\\/\//g' temp.txt
or this
awk -F"\\" '{if($2=="good"){OFS="\/"; $1=$1;} print $0}' temp.txt