I need to get complete list of external tables in db2 database. I have defined schema called DB2INST1. How to get complete list of external tables information using system tables?
The information lives in syscat.tables (documentation here) for Db2-LUW databases that support external tables, which have their PROPERTY column with value Y in position 27 of that column.
Example query returns the fully qualified name of external tables:
select trim(tabschema)||'.'||rtrim(tabname)
from syscat.tables
where substr(property,27,1)='Y'
with ur;
In general, the best and most reliable way to retrieve all information and to recreate the DDL statements for tables is to use the db2look tool. If you want to extract the metadata on your own, there are some catalog views to start with:
SYSCAT.TABLES holds the table information. Look for the PROPERTY column and check there if it is an external table.
SYSCAT.COLUMNS has the basic column information. But there are more related tables depending on types and attributes.
SYSCAT.EXTERNALTABLEOPTIONS shows the actual options for an external table, the things in addition to what makes a regular table.
There are many more tables to hold table properties, depending on the complexity of the table and column definitions.
I have many tables in different databases and want to bring them to a database.
It seems like I have to create foreign table in the database (where I want to merge them all) with schemas of all the tables.
I am sure, there is a way to automate this (by the way, I am going to use psql command) but I do not know where to start.
what I have found so far is I can use
select * from information_schema.columns
where table_schema = 'public' and table_name = 'mytable'
I added more detail explanation.
I wanted to copy tables from another database
the tables have same column names and data type
using postgres_fdw, I needed to set up a field name and data type for each tables (the table names are also same)
then, I want to union the tables have same name all to have one single table.
for that, I am going to add prefix on table
for instance, mytable in db1, mytable in db2, mytable in db3 as in
db1_mytable, db2_mytable, db3_mytable in my local database.
Thanks to Albe's comment, I managed it and now I need to figure out doing 4th step using psql command.
I am working trying to write an insert query into a backup database. I writing place and entities tables into this database. The issue is entities is linked to place via place.id column. I added a column place.original_id in the place table to store it's original 'id'. so now that i entered place into the new database it's id column changed but i have the original id stored so I can still link entities table to it. I am trying to figure out how to write entities to get the new id
so far i am at this point:
insert into entities_backup (id, place_id)
select
nextval('public.entities_backup_id_seq'),
(select id from places where original_id = (select place_id from entities) as place_id
from
entities
I know I am missing something because this does not work. I need to grab the id column from places when entity.place_id = places.original_id. Any help would be great.
I think this is what you want
insert into entities_backup (id, place_id)
select nextval('public.entities_backup_id_seq'), places.id
from places, entities
where places.original_id = entities.place_id;
I am working trying to write an insert query into a backup database. I writing place and entities tables into this database. The issue is entities is linked to place via place.id column. I added a column place.original_id in the place table to store it's original 'id'. so now that i entered place into the new database it's id column changed but i have the original id stored so I can still link entities table to it.
It would be simpler to not have this problem in the first place.
Rather than trying to fix this up after the fact, the better solution is to dump and load places and entities complete with their primary and foreign keys intact. Oracle's EXPORT or a utility such as ora2pg should be able to do it.
Sorry I can't say more. I know Postgres, not Oracle.
What I am trying to do is verify a URL. I just need to be able to select that single value from all databases that we have currently in SQL Server 2008. All the databases are the same, just multiple instances of the same database for different users.
I am looking to pull one item from one table in each database.
Each database contains a table SETTINGS and within that table a value for MapIconURL. I need that value from each table from within each database. I am looking at around 30 or so databases that would have this value.
So I found the "undocumented" Stored Proc sp_MsForEachDb and have working....to a point.
The code I am using is this:
EXEC sp_MsForEachDb 'use ?; SELECT "?" as databasename,SETTINGSKEYID, SECTION, NAME, INIVALUE, DESCRIPTION
FROM ?.dbo.SETTINGS
WHERE [NAME] = "MapIconURL"'
I have noticed that it is not selecting all the databases, but that it is also selecting the master table as well as other system tables, and am thinking that may be why it is not selecting all tables. Is there a way to exclude the system related tables?
If the number (and name) of the databases is fixed, then you could simply do:
SELECT MapIconUrl FROM db1.dbo.SETTINGS
UNION ALL
SELECT MapIconUrl FROM db2.dbo.SETTINGS
...
However, if either the number or names of the databases is not fixed, then you have to build the query dynamically.
First, run a query such as SELECT name FROM master..sysdatabases to get the names of the databases.
Then, loop over the result set (in T-SQL, use a CURSOR) and build your query and execute it (in T-SQL, use sp_executesql).
Is it possible to JOIN rows from two separate postgres databases?
I am working with system with couple databases in one server and sometimes I really need such a feature.
According to http://wiki.postgresql.org/wiki/FAQ
There is no way to query a database other than the current one.
Because PostgreSQL loads database-specific system catalogs, it is
uncertain how a cross-database query should even behave.
contrib/dblink allows cross-database queries using function calls. Of
course, a client can also make simultaneous connections to different
databases and merge the results on the client side.
EDIT: 3 years later (march 2014), this FAQ entry has been revised and is more helpful:
How do I perform queries using multiple databases?
There is no way to directly query a database other than the current
one. Because PostgreSQL loads database-specific system catalogs, it is
uncertain how a cross-database query should even behave.
The SQL/MED support in PostgreSQL allows a "foreign data wrapper" to
be created, linking tables in a remote database to the local database.
The remote database might be another database on the same PostgreSQL
instance, or a database half way around the world, it doesn't matter.
postgres_fdw is built-in to PostgreSQL 9.3 and includes read/write
support; a read-only version for 9.2 can be compiled and installed as
a contrib module.
contrib/dblink allows cross-database queries using function calls and
is available for much older PostgreSQL versions. Unlike postgres_fdw
it can't "push down" conditions to the remote server, so it'll often
land up fetching a lot more data than you need.
Of course, a client can also make simultaneous connections to
different databases and merge the results on the client side.
Forget about dblink!
Say hello to Postgres_FDW:
To prepare for remote access using postgres_fdw:
Install the postgres_fdw extension using CREATE EXTENSION.
Create a foreign server object, using CREATE SERVER, to represent each remote database you want to connect to. Specify connection
information, except user, and password, as options of the server
object.
Create a user mapping, using CREATE USER MAPPING, for each database user you want to allow to access each foreign server. Specify
the remote user name and password to use as user and password options
of the user mapping.
Create a foreign table, using CREATE FOREIGN TABLE or IMPORT FOREIGN SCHEMA, for each remote table you want to access. The columns
of the foreign table must match the referenced remote table. You can,
however, use table and/or column names different from the remote
table's, if you specify the correct remote names as options of the
foreign table object.
Now you need only SELECT from a foreign table to access the data
stored in its underlying remote table.
It's really useful even on large data.
Yes, it is possible to do this using dblink albeit with significant performance considerations.
The following example will require the current SQL user to have permissions on both databases. If db2 is not located on the same cluster, then you will need to replace dbname=db2 with the full connection string defined in the dblink documentation.
SELECT *
FROM table1 tb1
LEFT JOIN (
SELECT *
FROM dblink('dbname=db2','SELECT id, code FROM table2')
AS tb2(id int, code text);
) AS tb2 ON tb2.column = tb1.column;
If table2 is very large, you could have performance issues because the sub-query loads up the entire table2 before performing the join.
No you can't. You could use dblink to connect from one database to another database, but that won't help if you're looking for JOIN's.
You can't use different SCHEMA's within a single database to store all you data?
Just a few steps and You can reach the goal:
follow this reference step by step
WE HAVE BEEN CONNECTED TO DB2 WITH TABLE TBL2 AND COLUMN COL2
ALSO THERE IS DB1 WITH TBL1 AND COLUMN COL1
*** connecting to second db ie db2
Now just **copy paste the 1-7 processes** (make sure u use correct username and password and ofcourse db name)
1.**CREATE EXTENSION dblink;**
2.**SELECT pg_namespace.nspname, pg_proc.proname
FROM pg_proc, pg_namespace
WHERE pg_proc.pronamespace=pg_namespace.oid
AND pg_proc.proname LIKE '%dblink%';**
3.**SELECT dblink_connect('host=localhost user=postgres password=postgres dbname=db1');**
4.**CREATE FOREIGN DATA WRAPPER postgres VALIDATOR postgresql_fdw_validator;**
5.**CREATE SERVER postgres2 FOREIGN DATA WRAPPER postgres OPTIONS (hostaddr '127.0.0.1', dbname 'db1');**
6.**CREATE USER MAPPING FOR postgres SERVER postgres2 OPTIONS (user 'postgres', password 'postgres');**
7.**SELECT dblink_connect('postgres2');**
---Now, you can SELECT the data of Database_One from Database_Two and even join both db results:
**SELECT * FROM public.dblink
('postgres2','SELECT col1,um_name FROM public.tbl1 ')
AS DATA(um_userid INTEGER),tbl2 where DATA.col1=tbl2.col2;**
You can also Check this :[How to join two tables of different databases together in postgresql [\[working finely in version 9.4\]][1]
You need to use dblink...as araqnid mentioned above, something like this works fine:
select ST.Table_Name, ST.Column_Name, DV.Table_Name, DV.Column_Name, *
from information_schema.Columns ST
full outer join dblink('dbname=otherdatabase','select Table_Name,
Column_Name from information_schema.Columns') DV(Table_Name text,
Column_Name text)
on ST.Table_Name = DV.Table_name
and ST.Column_Name = DV.Column_Name
where ST.Column_Name is null or DV.Column_Name is NULL
You have use dblink extension of postgresql.
Reference take from this Article:
DbLink extension of PostgreSQL which is used to connect one database to another database.
Install DbLink extension.
CREATE EXTENSION dblink;
Verify DbLink:
SELECT pg_namespace.nspname, pg_proc.proname
FROM pg_proc, pg_namespace
WHERE pg_proc.pronamespace=pg_namespace.oid
AND pg_proc.proname LIKE '%dblink%';
I have already prepared full demonstration on this. Please visit my post to learn step by step for executing cross database query in Postgresql.
Cannot be done? Of course we can, without special extensions. In our case, we had to compare two tables from different database servers, e.g. ACC and PROD, hence an even harder case than from most answers. Especially because ACC and PROD are deliberately on different servers to create a barrier, so you will not easily gain enough rights to perform a GRANT USAGE ON FOREIGN SERVER.
The obvious solution is to export both tables, and import both in the same database, e.g. DEV, or your own local db, under appropriate names, e.g. table1_acc and table1_prod, or schemas like acc and prod. Then, you may JOIN those with no special problems.