I have tables called; quotes, trades and sym saved as splayed tables in a directory called splay in my q directory. I cannot figure out how to load these tables using the methods identified on the code.kx.com website. When I check the file properties, it says file type is File, so I do not know what type of file to open after the filename. Once I have managed to load these files, I need to select all records that contain the symbol IBM (in the column sym of the tables). I have tried so far:
q)\cd splay
q)\l quotes
'quotes. OS reports: The system cannot find the file specified.
[0] (.Q.l)
q)\l trades
'trades. OS reports: The system cannot find the file specified.
[0] (.Q.l)
.Q )\l trades.q
'trades.q. OS reports: The system cannot find the file specified.
[2] (<load>)
))\l trades.dat
'trades.dat. OS reports: The system cannot find the file specified.
[4] (.Q.l)
to no avail. the same approach but for the directory itself.
q)\l splay
I have tried to just run the files without loading by being in the directory but this has also not been successful.
q)\cd splay
q)\cd
"C:\\Users\\Lewis\\splay"
q)t:get`:trades
'trades. OS reports: The system cannot find the file specified.
[0] t:get`:trades
^
q)q:get `:quotes
'quotes. OS reports: The system cannot find the file specified.
[0] q:get `:quotes
^
q)load`quotes
'quotes. OS reports: The system cannot find the file specified.
[0] load`quotes
^
One of the ways the code.kx.com website says to do this, and one of my first approaches:
C:\Users\Lewis\q>q/q.exe splay
KDB+ 3.5 2017.10.11 Copyright (C) 1993-2017 Kx Systems
w32/ 4()core . . .
Welcome to kdb+ 32bit edition
For support please see http://groups.google.com/d/forum/personal-kdbplus
Tutorials can be found at http://code.kx.com/q
To exit, type \\
To remove this startup msg, edit q.q
'/q.exe. OS reports: The system cannot find the file specified.
[0] (.Q.l)
.Q )
and the final approach I have had to load these files or directory is:
q)))load `splay
'splay. OS reports: Access is denied.
[6] load `splay
^
q))))\cd splay
q))))load `splay
'splay. OS reports: Access is denied.
[9] load `splay
^
Please, help me!
If you are in the directory /Users/Lewis you should be able to pass the splay as a command line parameter, like this: q splay. There may be an issue with the path you are using to your q application q\q.exe which is causing an error to flag up.
Alternatively you should be able to open it from inside an active q session like: \l splay provided you are in the directory /Users/Lewis OR like \l . if you are in the directory /Users/Lewis/splay, where . is a shortcut for the current directory.
Additionally you stated that you have the tables trade, quote and sym. It all depends how you saved the data to disk but the sym file should not be a table like the other two, which you should see when you load the data in.
The error OS reports: Access is denied. is probably due to the q process not having appropriate permissions to access the file. If you start the process with admin privileges you should be able to get around this error.
Related
Currently I am working a project that has have been using the pathlib library so I can work on my Windows desktop when I need too and on my MacBook Pro. Essentially be able to work between both operating systems. I have not have any issues at all until right now. Here is the set up:
I have a pipeline set up to automatically save a .joblib and a whole lot of .png files that will go to a directory called
output_dir = Path('../Trained_Models/Differential_gene_analysis/A Kidney Cancer Transcriptome Molecular Signature Identifies Tumors with Tumor Thrombus/Models train on TCGA data and test on Rodriguez data/Oct-XX-20XX')
For example, if I want to save a .joblib file under the name RandomForest_TumorThrombus_104.joblib,I would use the command
joblib.dump(model ,output_dir / 'RandomForest_TumorThrombus_104.joblib')
On my MacBook Pro, I have no issues when this is ran, but on Windows it gives me the following error
FileNotFoundError: [Errno 2] No such file or directory: '..\\Trained_Models\\Differential_gene_analysis\\A Kidney Cancer Transcriptome Molecular Signature Identifies Tumors with Tumor Thrombus\\Models train on TCGA data and test on Rodriguez data\\Oct-17-2022\\RandomForest_TumorThrombus_104.joblib'
I have tried to use the .resolve() method to get the absolute path but still gives me the same error. I have tried to experiment to try to see what is goin on such as using os.path.exists(). When using the os.path.exists() method I get True for the follwoing command:
os.path.exists(output_dir)
So it does indeed recognize that the directory exists. The next thing I tried was to rename the file to something like dddddd.joblib and that worked. But I find that only a few names for the file would allow me to save the files. During debug I found that the most recent Traceback occurs here:
with open(filename, 'wb') as f:```
I was wondering if anyone here had any idea what was going on here and how I can fix this issue? Please and Thank you.
The solution was to enable long paths on Windows.
I have created a binary field in Odoo-10 that is supposed to store CSV file on server. But when I am checking it's table at postgres instead of getting binary data in that column, I am getting something like this
<memory at 0x7f1539393648>
Where is my binary file getting stored exactly?
my odoo-version is 10.
I am also trying to migrate table from openerp-6 to Odoo-10, the column that stores the CSV binary has okay data at postgres table for version-6, But when I migrate that table, CSV binary column contains this "memory at 0x7f1539393648" again at table in version-10
Where I am making the mess. Help appreciated.
Binary data storing has shifted out of database into normal storage on the filesystem around Odoo 7 or 8 as default.
You can find the files under (from odoo/odoo/tools/appdirs.py):
Typical user data directories are:
Mac OS X: ~/Library/Application Support/<AppName>
Unix: ~/.local/share/<AppName> # or in $XDG_DATA_HOME, if defined
Win XP (not roaming): C:\Documents and Settings\<username>\Application Data\<AppAuthor>\<AppName>
Win XP (roaming): C:\Documents and Settings\<username>\Local Settings\Application Data\<AppAuthor>\<AppName>
Win 7 (not roaming): C:\Users\<username>\AppData\Local\<AppAuthor>\<AppName>
Win 7 (roaming): C:\Users\<username>\AppData\Roaming\<AppAuthor>\<AppName>
If you have set a value data_dir in your Odoo server config, the files can be found there.
I have this line of code:
loadedFunc: `:mylib 2:(`myfunc;1)
so from the kdb/q reference., it means loading "my func", which has one argument from the dynamic library with name mylib .
Where is the path can I locate this physical library of mylib? I don't see any path specified elsewhere..
The default path is set as mentioned here
It will attempt to load from the current working directory (as \pwd ) first.
If it doesn't find the appropriate library there, then it will attempt to load from the $QHOME/[installationType] directory (so C:/q/w32 by default for Windows 32bit, etc.)
Hi would like to have multiple kickstart files which use a central kickstart file for the bulk of the install and a second file for the small differences. I'm building DVDs for distribution.
The first ks contains small config and has a %include line which points to a common ks file which should do most of the work.
I'm having trouble with %include line.
Fist of all have I understood what %include is for?
Second I think I have the syntax wrong because when I boot I get the following error message:
unable to open input kickstart file: Could not open/read file:///mnt/sysimage/media/dvd/ks/common.cfg
I am installing from a DVD what is the correct path or syntax to the files stored in a sub directory called /ks/ of the DVD's root?
I have tried the following:
%include /mnt/sysimage/media/dvd/ks/common.cfg
%include cdrom:/ks/common.cfg
Does anyone have any working examples?
Thanks in advance for your support
I eventually found part of the answer
%include /mnt/stage2/ks/common.cfg
The dvd is mounted as stage2
However I now get an error message saying it cant read the file
%%include
I can see the file and less it if I hit ctrl + alt + F1
Does anyone have a working simple example of how this should be written?
Open your isolinux/isolinux.cfg from the OS and give the ks file path as below . You can enter your kick start option in boot: prompt of dvd
label 1
kernel vmlinuz
append initrd=initrd.img nofb skipddc lang= devfs=nomount ramdisk_size=8192 ks=cdrom:/option1.cfg 1
label 2
kernel vmlinuz
append initrd=initrd.img nofb skipddc lang= devfs=nomount ramdisk_size=8192 ks=cdrom:/option2 2
label 3
kernel vmlinuz
append initrd=initrd.img nofb skipddc lang= devfs=nomount ramdisk_size=8192 ks=cdrom:/option3.cfg 3
Then edit /isolinux/boot.msg and add the enter the below details
Select installation:
1) option 1
2) option 2
3) option 3
I am trying to run some kind of programm using command line, but I got an error.
The command line is:
quantisnp2.exe --outdir D:\output\ --config "C:\Program files\QuantiSNP\params.dat" --levels "C:\Program files\QuantiSNP\levels.dat" --sampleid CNV1 --gender female --emiters 10 --Lsettings 2000000 --doXcorrect --genotypes --gcdir D:\gc\ --input-files C:\Program files\CNV1.txt
QuantiSNP:Single-file mode input find.
QuantiSNP:Processing file: C:|Program
QuantiSNP:Local CG content directory specified. Local CG content correction will be used.
??? Error using ==>textread at 167
File not found.
Error in ==> quantisnp2 at 293
The first thing I'd be looking at is the unquoted C:\Program files\CNV1.txt at the end of the command (all your other ones are quoted).
There's a good chance that's being treated as two arguments, C:\Program and files\CNV1.txt.
You may also want to check the spelling of emiters, I'm pretty certain the correct English word would be emitters though, of course, this could be a case of the QuantiSNP developers not knowing how to spell :-)