I have downloaded postgreSQL version 11.1 on my MacBook version 10.14.2, while installing I got an error says the following:
" Problem running post-install step. Installation may not complete correctly The database cluster initialization failed." and then clicked on next. (Mentioned this, just in case if it is related to my problem)
The problem I have now is, I can't view anything under servers, and whenever I try to create a new server it shows me this message.
screenshot of error message
I'm new to this and don't know what to do, any idea what should be done?
I am new to freenode and postgresql. I am trying to migrate from mysql to postgresql. Currently trying to set up server for ssl. Have created my server certs and configured the .conf files for ssl according to the manual as far as I can see. Trying to restart postgre sql service fails. Windows event log gives me an event ID of 0 and says
pg_ctrl could not start server examine the log output.
I can't find any log detailing the failure to start in the postgresql folders.
I have tried to register the pgevent.dll as advised by the postgresql manual (18.11 of most recent version), but I get an error message
The module "C:postgreSQL\pg10\lib\postgresql\pgevent.dll" was loaded but the entry-point DllRegisterServer was not found
I believe that means it is either not a registrable dll or it's corrupt.
Can anyone please advise how I can track on Windows the error that is causing Postgre to fail to start?
I am new to PostgreSQL and I am trying to create a connection but I don't know for some reason my connection is not being established.
At first it said that cant hear the server so whenever I go in to task manager and try to run Postgres servers it says "THE SYSTEM CAN NOT FIND THE FILE SPECIFIED" so I tried to remove Postgres completely from the system but it not completely uninstalling it from my laptop. I think its just remaining some instances in to my laptop which is not letting it to uninstall completely.
please find the IMAGE here -> click here
I have attached the image above. Please see that. I have deleted every Postgress thing from my laptop but I think there is still some left in the laptop that is why it is showing this in the services.
I tried to establish a connection in pgAdmin to the PostgresSQL server.
I always get the message:
could not receive data from server: Software caused connection abort (0x00002745/10053).
I read several posts where people had the same problem but they didn't help me.
Because my version was a bit older I uninstalled the whole postgresql and installed the newest version with the installer of EnterpriseDB (PostgreSQL 9.6 on windows 64). Everything looks fine. But I can't connect to the server from pgAdmin 4 again. I get the same error message.
In the logfile is written: "An existing connection was forcibly closed by the remote host"
Has anybody a clue what the problem could be?
A partial solution for me was to restart the postgresql-server each time after booting up my computer with NET STOP and NET START. This was cumbersome but worked.
Because my computer still had other connection problems, subsequently I updated my system to Windows 10 which totally solved all my problems.
I am using helios Eclipse for debugging my code in postgresql.
My aim is to know how postgresql uses join algorithms during the join query, so I started to debug nodenestloop.c which is in the Executor folder.
I gave break points in that file, But whenever I try to debug that file, the control goes to main.c and never comes back,How do I constraint the control only to that particular file(nodenestloop.c)
Below are the following fields which I gave in Debug configurations of Helios Eclipse.
C/C++ Application - src/backend/postgres and
project - pgsql
I followed the steps given in the following link for running the program.
https://wiki.postgresql.org/wiki/Working_with_Eclipse#
I even uncheked the field "Start on Start up=main" , but When I do that, The step in and Step over buttons are not activated and the following problem has popped up.
Could not save master table to file '/home/ravi/workspace/.metadata/.plugins/org.eclipse.core.resources/.safetable/org.eclipse.core.resources'.
/home/ravi/workspace/.metadata/.plugins/org.eclipse.core.resources/.safetable/org.eclipse.core.resources (Permission denied)
So I started eclipse using sudo, but this time the following error has come in the console of eclipse.
"root" execution of the PostgreSQL server is not permitted.
The server must be started under an unprivileged user ID to prevent
possible system security compromise. See the documentation for
more information on how to properly start the server.
Could any one help me with this.
Thank you
Problem 1: User ID mismatch
Reading between the lines, it sounds like you're trying to debug a PostgreSQL instance that's running as the postgres user, or a different user ID to your own anyway. Hence your attempt to use sudo.
That's painful, especially when using an IDE like Eclipse. With plain gdb you can just sudo the gdb command to the desired uid, e.g. sudo -u postgres -p 12345 to attach to pid 12345 running as user postgres. This will not work with Eclipse. In fact, running it with sudo has probably left your workspace with some messed up file permissions; run:
sudo chown -R ravi /home/ravi/workspace/
to fix file ownership.
If you want to debug processes under other user IDs with Eclipse, you'll need to figure out how to make Eclipse run gdb with sudo. Do not just run all of Eclipse with sudo.
Problem 2: Trying to run PostgreSQL under the control of Eclipse
This:
"root" execution of the PostgreSQL server is not permitted. The server must be started under an unprivileged user ID to prevent possible system security compromise. See the documentation for more information on how to properly start the server.
suggests that you're also attempting to let Eclipse start postgres directly. That's very useful if you're trying to debug the postmaster, but since you're talking about the query planner it's clear you want to debug a particular backend. Launching the postmaster under Eclipse is useless for that, you'll be attached to the wrong process.
I think you probably need to read the documentation on PostgreSQL's internals:
Tour of PostgreSQL Internals
PostgreSQL internals through pictures
Documentation chapter - internals
Doing it right
Here's what you need to do - rough outline, since I've only used Eclipse for Java development and do my C development with vim and gdb:
Compile a debug build of PostgreSQL (compiled with ./configure --enable-debug and preferably also CFLAGS="-ggdb -Og -fno-omit-frame-pointer"). Specify a --prefix within your homedir, like --prefix=$HOME/postgres-debug
Put your debug build's bin directory first on your PATH, e.g. export PATH=$HOME/postgres-debug/bin:$PATH
initdb -U postgres -D $HOME/postgres-debug-data a new instance of PostgreSQL from your debug build
Start the new instance with PGPORT=5599 pg_ctl -D $HOME/postgres-debug-data -l $HOME/postgres-debug-data.log -w start
Connect with PGPORT=5599 psql postgres
Do whatever setup you need to do
Get the backend process ID with SELECT pg_backend_pid() in a psql session. Leave that session open; it's the one you'll be debugging.
Attach Eclipse's debugger to that process ID, using the Eclipse project that contains the PostgreSQL extension source code you're debugging. Make sure Eclipse is configured so it can find the PostgreSQL source code you compiled with too (no idea how to do that, see the manual).
Set any desired breakpoints and resume execution
In the psql session, do whatever you need to do to make your extension run and hit the breakpoint
When execution pauses at the breakpoint in Eclipse, debug as desired.
Basic misunderstandings?
Also, in case you're really confused about how all this works: PostgreSQL is a client/server application. If you are attempting to debug a client program that uses libpq or odbc, and expecting a breakpoint to trigger in some PostgreSQL backend extension code, that is not going to happen. The client application communicates with PostgreSQL over a TCP/IP socket. It's a separate program. gdb cannot set breakpoints in the PostgreSQL server when it's connected to the client, because they are separate programs. If you want to debug the server, you have to attach gdb to the server. PostgreSQL uses one process per connection, so you have to attach gdb to the correct server process. Which is why I said to use SELECT pg_backend_pid() above, and attach to the process ID.
See the internals documentation linked above, and:
PostgreSQL site - coding
PostgreSQL wiki - developer resources
Developer FAQ
Attaching gdb to a backend on linux/bsd/unix
I also faced similar issue and resolved it after some struggle
I misunderstood the following point under Debugging with child processes in the wiki (https://wiki.postgresql.org/wiki/Working_with_Eclipse).
5."Start postmaster & one instant of postgresql client (for creating one new postgres)"
The above step should be performed from terminal by starting postgres server and one client.
Hope this helps
Once this is done then debugger in eclipse needs to be started for C/C++ Attach to Application