I am trying to use a Virtual Box VM to create a development environment I can share with a few dozen other developers. We are all on an internal network and need to connect to external web sites via proxy server. On the VM (guest) I am putting:
windows 10 64 bit
weblogic server
Several other dev tools
My requirements are:
From the guest OS I need to be able to hit the internet (ie google.com)
From the guest OS I also need to be able to open chrome and hit the server webpages running on the guest OS using mysite.com:8007/index.html.
I have modified the guest OS host file such that 127.0.0.1 maps to mysite.com. Ideally that should mean anything going to mysite.com will get resolved to 127.0.0.1.
Our proxy to reach the internet is http-proxy.mysite.com:80. I am able to connect to the internet (pages like www.google.com) as long as I enable the proxy (http-proxy.mysite.com:80) in chrome proxy settings. However I need to be able to enter mysite.com:8007/index.html in the browser and be able to load the homepage. I am able to hit the server using localhost:8007 but I need mysite.com:8007 to work since authentication cookies wont get passed correctly to localhost:8007 urls.
When I enter mysite.com:8007/index.html in chrome it keeps trying to redirect to the IP address of the host OS 10 . * . * . * and the server is not running on the Host OS.
When I enter 'curl mysite.com:8007/index.html' in a command prompt on the guest OS it actually does prints the correct response from my server (no idea why chrome is different / not respecting the host file config).
Any idea how to configure Virtual Box or chrome such that the external pages as well as the guest server pages work?
For internet access on VM, you need to configure network card as BRIDGE, NAT or NAT NETWORK. In your case NAT NETWORK will be better solution, because this will allow you bo be you VM visible in network, just like your Host.
If you have and Internal network you mus have also another card configured for VM for internal network.
To be your VM accessible from Internal Network via http... the coomputers in network have to setup DNS entry pointing to your VM.
I am currently trying to make a socket connection from my client (iOS simulator) to my host (Genymotion simulator). I am having a hard time finding the correct IP address and configuring the right settings for VirtualBox to get this to work.
How can I find the proper IP address and port for iOS to connect to when I host the server on the Genymotion server?
By default Genymotion devices use a NAT connection to connect to internet. It means they are not visible from your local network. You can change this connection to a Bridged connection. This type of connection will let your local DHCP gives the Genymotion device’s IP, then you will be able to reach it from everywhere on your local network.
To fix this, open VirtualBox app, choose the device you want to setup, open the settings > Network tab > Adapter 2 > Attached to: "Bridged Adaptor” instead of “NAT".
Then you need to get the local IP of the device. You can get it by running this command:
adb shell "ifconfig | awk '/inet addr/{print substr(\$2,6)}' | awk 'NR==2'"
Then you can connect to your device very easily using this IP, from everywhere in your local network.
We are working on making this really easier in the future. I'll update the post when this will be released.
I have configured jetty-maven-plugin in my eclipse Mars and I can run the server using jetty start and stop goals. I can able to access the website using http://localhost:8080/myapp but not using local IP address(i.e., http://192.168.0.5:8080/myapp) from my own computer or other computers connected in the same network via LAN and Wi-Fi.
As mentioned as a solution in these posts,
how to make jetty server accessible from LAN?
Configuring Jetty to accept connections from all hosts
I configured the server host to 0.0.0.0 from localhost to listen on all hosts. With this setting I can see on server start log,
INFO:oejs.AbstractConnector:Started SelectChannelConnector#0.0.0.0:8080
and it works only on http://localhost:8080 but it's not accessible from http://192.168.0.5:8080.
I also tried running that if the interface is accessible using the Networks Interface Listing as mentioned in this comment. and I got,
Display name: NETGEAR WNA1000M N150 Wireless USB Micro Adapter
Name: wlan4
InetAddress: /192.168.0.5
I also tried turning off my Windows Firewall/antivirus but din't help. My jetty version is <jetty.version>9.3.0.M1</jetty.version> and JDK 1.7. What could be the problem? Any help is appreciated.
McAfee Endpoint Security was the culprit here. It was blocking the requests with IP addresses from my very own computer. Turned off the firewall inside the Antivirus and I was able to access the site with http://192.168.0.5:8080/mysite from the browser and other devices connected through the network.
Sometimes some other program opens your port on external address before you do that with Jetty. It will receive all traffic instead. On Windows you will not know it if you reuse port (that is Jetty's default behavior). Check with netstat -ano what is the IP of the process that is indeed listening on 0.0.0.0:8080. Verify if it is your Jetty process only.
Then try connecting with telnet or netcat and see if you can open the connection and what is the response.
I implemented a web service for an Android application. The web service is running on my local host (192.168.1.2). Using the Android emulator I succeeded to connect to web service. The I tried to connect my Android device using debugging mode to web service but it didn't work. So my question is if it is possible to connect an Android device to this web service that is running on my local host (192.168.1.2) without using a real IP ?
It's much simpler way supported by google!
Connect your phone via usb to computer and enable usb debugging
On your computer open Chrome browser and type exactly this address: chrome://inspect/#devices
Now you can link your computer port to your device port by port forwarding button. On my computer I have service on address localhost:61437 and I just linked it to device's 8081 port. Remeber to check 'Enable port forwarding' checkbox
screen from service on my computer ( localhost:61437 )
screen from my mobile browser with the same service ( localhost:8081). And that's it. Also you use this service address in your application
Did you already solve your problem? I also got a problem like you. These are the steps that I already done:
unplug lan cable or turn off any other internet connection from your pc.
connect your android mobile to your pc using usb.
turn on usb tethering
back to your pc. check your ip. mine is 192.168.42.37
check your webservice app in your pc. let's say http://192.168.42.37/webserviceapp
back to your android mobile. try this url http://192.168.42.37/webserviceapp
Now you can access your webservice app in your pc from your mobile phone.
Well your localhost is 127.0.0.1 (or ::1) and your LAN IP is 192.168.1.2. Each pc/device that are connected under your LAN could reach your webservice on IP 192.168.1.2
Your Android device must be so connected under the same LAN maybe through Wifi connection so it will be able to talk with 192.168.1.2.
If you can't connect your Android device under the same LAN eg you have just a 3g connection you need to play with your router/firewall to redirect all incoming traffic (maybe just the http traffic) from your public ip to you private ip (192.168.1.2)
Hope this help
I'll throw in my process, since nothing on SO worked for me. Here are the steps I took to connect my physical android device to the web service running on my laptop (connected to the phone) on localhost:
Enable USB debugging on your Android device
Run your web service on your machine. My web service runs on localhost, port 3000 in development: http://localhost:3000/api/...
Run ifconfig (Unix), or ipconfig (Windows)
Find your machine's inet address on your LAN interface. Mine is 10.0.0.121 for interface wlan0. Externally, it is 68.43.XX.XXX, which is not the address that you want to use.
Use the LAN IP since you are connecting to your service on LAN, otherwise you might get an econnrefused (connection refused) error due to firewall rules
Build your http URL with that IP address, and the port that your web service is running on. For me, it's http://10.0.0.121:3000/api/...
When you launch your app, you should connections to your local web service in logs, Wireshark, etc, and you should see the desired activity/data in your Android application.
I had the same issues, researched a lot then found out that you have to explicitly make changes in your firewall settings. Your firewall is blocking your code to be accessed from external source. So, all you need to do is, go to firewall settings, add port 80 (in my case since, I am using Apache http Server) for inbound and outbound. Now, you can test it on your phone's browser http://192.16..**:80/
I've done that on a Mac using GasMask and Charles Proxy Server. Your phone and your computer have to be on the same network.
say the webservice url you want to access is at http://api.xyz.com, you first use GasMask to point that url to your localhost, then use Charles to set up a proxy server. Then you go to the settings on your phone, go into Wi-Fi, long-press the network you are connected to, choose Modify Network, and enter the proxy settings Charles gave you.
In my case, nothing of these solutions works because Windows firewall blocks it, but putting a rule on the firewall hasn't effect.
The problem in my case is that my laptop is connected with Wifi and Windows had the Wifi connection like a Public network. I must to change the network connection to Private network. http://www.comofuncionatodo.net/tecnologia/informatica/como-cambiar-de-red-publica-a-red-privada-en-windows-10/
I agree with the other answers as good approaches if you don't want to expose your DEV webservice on the internet. However, it's much easier if you do just expose the webservice. There's a number of free DNS services, but I've found no-ip to be the easiest to set up. I use it for exactly the purpose that you asked about; so I can test with my DEV webservice on a real device.
If you choose to go with no-ip (I have no affiliation with that company, it's just the one I've used and am familiar with), you can get a free publicly accessible URL like http://MyExampleWebServer.no-ip-org, and no-ip has a utility you can install so even if you're behind a dynamic IP, it will always keep the correct external IP associated with that URL. If you're working from your house, then you'd just need to make sure you port forward traffic from port 80 to your internal 192.x.x.x IP address (or whatever port you use; maybe 443 for ssl).
It's as easy as that, and now you can hit that webservice from any device that can access the internet.
I haven't worked with it, but I believe dyndns also offers a similar service.
This solution is for GAE development server in Eclipse
Step 1: Get the LAN IP
Goto your Windows Command Console (Press Win+R, then type "cmd"). In the console, enter "ipconfig". You will see a list of display. Under Wireless LAN adapter Wi-Fi, get the IPv4 Address. It will be something 192.168.x.x
LAN IP : 192.168.x.x
Step 2:
Go to Eclipse, Open the Configured server
Under Properties of GAE Development Server -> Local Interface address to bind to, enter the LAN IP address, and save.
Step 3:
Now you can access the GAE server by
http://192.168.x.x:8888/
8888 - Refers to the Port Number, as mentioned in the GAE development server
In order to access local web services using their own server hosts rather than IP addresses with ports, do these following steps:
Make sure your Android device and your local machine are on the same network.
Install SquidMan on your Mac, Linux, or any other Proxy Server.
Configure the proxy server's HTTPPort (ex. 5555) and clients (ex. 192.168.0.0/24) to your own network mask, and run the proxy server.
You are either using the web services in:
a. A web browser: Configure the proxy settings of your Android device from Modify WiFi networks.
b. Android application:
Set up the Proxy for your HTTP client. If you are using Volley, check this out: Volley Behind a Proxy server.
You can now connect to it by using whatever URL you are using on your host to connect to the web service (ex. http://my-local-machine.com)
Hint: If you got 4xx response codes, make sure your web service allows connections from other non-local-hosts.
If you are referring your localhost on your system from the Android emulator then you have to use
http://10.0.2.2:8080/
Because Android emulator runs inside a Virtual Machine(QEMU) therefore here 127.0.0.1 or localhost will be emulator's own loopback address.
I'm trying to test my iPhone application on the device.
I have a mac computer which stores my development environment.
Right now I can only access PHP files using the http://localhost/PHPFileLocation
which does not work when I try to test my app on real device.
How do I configure apache2 to be accessible from outside?
Is it possible to configure it to a specific IP address?
I want to reach some php scripts located on my development machine running apache2 from my iPhone device.
Thanks
If your computer has a WiFi card then you should be able to attach the iPhone remotely to a ad-hoc Wifi network created on your dev machine.
I'm assuming your Mac is behind a router. You should be able to configure your router to port forward connections to your WAN facing IP address to port 80 (the HTTP port) on your Mac - see http://portforward.com/ for some help.
You may also need to turn the firewall off on your Mac.
Once this is set up correctly you can hit http://yourexternalIP/PHPFileLocation in your iPhone app and this will be directed by your router to the Apache2 server on your Mac. The external IP is normally found on your router's admin page somewhere.