I had a Web Server, which is configured with Ubuntu. Some web applications are hosted there and Clients from windows user browse/use those applications through the network. Application accessibility was smoother and faster and also was running without any interruptions.
But all the issues start when I configure the Windows Server and put all the users under a DOMAIN CONTROLLER. Now all the applications accessibility become too slow. Sometimes some pages are not loading at all.
I am mentioning all the IP configurations bellow-
Network Default Gateway: 172.16.0.1/16
Web Server- 172.16.2.2/16
Windows Server (Domain Controller)- 172.16.3.1/16
Using this Windows Server IP as DNS IP for all Client PC and also for the Web server.
Clients IP range: 172.16.1.1 to 172.16.10.254
Please See the Graphical view of my Configuration from the link below:
https://imgur.com/a/k3WLSg3
It was a DNS issue. I restored the Previous DNS settings in all clients and server then everything goes to normal condition.
I use an extension called Live Server in Visual Studio Code. When I run live, the browser opens and the url is http://127.0.0.1:5500/index.html. Why can't I open this url on my phone's browser to see the live site on the phone. Is there a way to do this (Live reload on phone and browser)?
Note: I also develop using ionic and when I ionic serve I can see it on browser and when I open the ionic dev app (not ionic view!), I can see the live app on the phone. I can view it on multiple devices with the condition of all devices being in the same network which I am fine with.
127.0.0.1 is a special-purpose IPv4 address reserved for loopback purposes. That is, this IP refers to your computer itself.
By entering http://127.0.0.1:5500/index.html in your browser, you're requesting web page within your computer.
In normal case, your computer will be in a NAT network (under same wi-fi AP for instance), and you'll be assigned with a virtual IP. Normally it's 192.168.x.x.
You may enter the following command in your command prompt to see your IP address.
ipconfig
If you're using Mac or Linux, use this instead.
ifconfig
As a result, under your network interface card, you'll get your IP Address.
If the IP address belongs to virtual IP, then you may access it with your phone using
http://< Your IP Address >:5500/index.html
If it's not virtual IP, it is Public IP. Then, you'll have to configure appropriate Firewall settings under this circumstance.
Hope this will help.
You cannot open the same url on your phone, because that url host (127.0.0.1) refers to the localhost (the same machine).
If your phone and server are on the same network, you can replace the current host with the servers local IP.
So if your servers local IP is: 192.168.0.36
the URL you enter in your phone should be http://192.168.0.36:5500/index.html.
I had a same problem.
Solution: Control Panel -> Windows Defender Firewall -> Allow an app or feature through Windows Defender Firewall -> Allowed "code.exe" app.
Run ipconfig and find your private IP.
Make sure your phone is on the same network.
go to http://192.168.0.***:5500/
Open Live server's settings.json and add these two settings "liveServer.settings.useLocalIp": true and "liveServer.settings.host": "localhost". Then type your localhost ip in your mobile browser (in my case it was 192.168.0.110) with the rest of the Live server URL i.e. 192.168.0.110:5500/index.html. This worked for me.
Let me clear this out for you. we call localhost or 127.0.0.1 as loop backs. which will itself point to the same machine(means that particular service should also be hosted in the same machine). what Microsoft did with visual studio live share is that if have the live share extension it will create a reverse proxy between the host(where the server is hosted) and the target (In this case your browser) which means even though your host is in a different country the extension will tunnel the transparent proxy to your loop-back address. visual studio live share extension is what you phone doesn't have and Microsoft doesn't support yet. If you still want to access your local service what you can do is turn off the firewall(or pass through that particular port where ur service is hosted) and connect your phone to the same network as your machine with the service running and instead using http://127.0.0.1:5500/index.html use http:// UR SERVER IP :5500/index.html you can get UR SERVER IP by giving ipconfig in windows command prompt or ifconfig if ur server is on linux.
I have configured jetty-maven-plugin in my eclipse Mars and I can run the server using jetty start and stop goals. I can able to access the website using http://localhost:8080/myapp but not using local IP address(i.e., http://192.168.0.5:8080/myapp) from my own computer or other computers connected in the same network via LAN and Wi-Fi.
As mentioned as a solution in these posts,
how to make jetty server accessible from LAN?
Configuring Jetty to accept connections from all hosts
I configured the server host to 0.0.0.0 from localhost to listen on all hosts. With this setting I can see on server start log,
INFO:oejs.AbstractConnector:Started SelectChannelConnector#0.0.0.0:8080
and it works only on http://localhost:8080 but it's not accessible from http://192.168.0.5:8080.
I also tried running that if the interface is accessible using the Networks Interface Listing as mentioned in this comment. and I got,
Display name: NETGEAR WNA1000M N150 Wireless USB Micro Adapter
Name: wlan4
InetAddress: /192.168.0.5
I also tried turning off my Windows Firewall/antivirus but din't help. My jetty version is <jetty.version>9.3.0.M1</jetty.version> and JDK 1.7. What could be the problem? Any help is appreciated.
McAfee Endpoint Security was the culprit here. It was blocking the requests with IP addresses from my very own computer. Turned off the firewall inside the Antivirus and I was able to access the site with http://192.168.0.5:8080/mysite from the browser and other devices connected through the network.
Sometimes some other program opens your port on external address before you do that with Jetty. It will receive all traffic instead. On Windows you will not know it if you reuse port (that is Jetty's default behavior). Check with netstat -ano what is the IP of the process that is indeed listening on 0.0.0.0:8080. Verify if it is your Jetty process only.
Then try connecting with telnet or netcat and see if you can open the connection and what is the response.
I am hosting a Oracle Linux 6.5 OS using VMWare on my windows 7 laptop. The VM is configured to use NAT networking configuration, and I am able to ping the guest OS successfully from my windows machine. Also, I am able to access internet from within my guest OS.
However, I am unable to access a web application running on port 8080 on a web server hosted within the guest OS using a browser in my host OS. The application is however accessible when accessed from a browser within the guest OS.
Some observations that may be of some use:
1. Neither my laptop, nor the VM have a static IP address.
2. I am able to ping my guest OS from host, and vice versa
3. Firewalls are disabled on both my laptop as well as the guest OS
Any help would be highly appreciated
The reason for the above issue could be mostly because of firewall settings/rules enabled in guest OS OEL. To check the rules you can type iptables -L -n at bash prompt which will display FILTER rules (CHAIN INPUT/OUTPUT/FORWARD).
Adding filters to allow the host to access guest http protocol would make things work. On the other hand, if this is for developmental purposes you can completely disable the firewall filter by saying
service iptables stop. Keep in mind that this is not a safe approach as it exposes your guest to the world without a firewall especially if you are using a bridged network connection.
I implemented a web service for an Android application. The web service is running on my local host (192.168.1.2). Using the Android emulator I succeeded to connect to web service. The I tried to connect my Android device using debugging mode to web service but it didn't work. So my question is if it is possible to connect an Android device to this web service that is running on my local host (192.168.1.2) without using a real IP ?
It's much simpler way supported by google!
Connect your phone via usb to computer and enable usb debugging
On your computer open Chrome browser and type exactly this address: chrome://inspect/#devices
Now you can link your computer port to your device port by port forwarding button. On my computer I have service on address localhost:61437 and I just linked it to device's 8081 port. Remeber to check 'Enable port forwarding' checkbox
screen from service on my computer ( localhost:61437 )
screen from my mobile browser with the same service ( localhost:8081). And that's it. Also you use this service address in your application
Did you already solve your problem? I also got a problem like you. These are the steps that I already done:
unplug lan cable or turn off any other internet connection from your pc.
connect your android mobile to your pc using usb.
turn on usb tethering
back to your pc. check your ip. mine is 192.168.42.37
check your webservice app in your pc. let's say http://192.168.42.37/webserviceapp
back to your android mobile. try this url http://192.168.42.37/webserviceapp
Now you can access your webservice app in your pc from your mobile phone.
Well your localhost is 127.0.0.1 (or ::1) and your LAN IP is 192.168.1.2. Each pc/device that are connected under your LAN could reach your webservice on IP 192.168.1.2
Your Android device must be so connected under the same LAN maybe through Wifi connection so it will be able to talk with 192.168.1.2.
If you can't connect your Android device under the same LAN eg you have just a 3g connection you need to play with your router/firewall to redirect all incoming traffic (maybe just the http traffic) from your public ip to you private ip (192.168.1.2)
Hope this help
I'll throw in my process, since nothing on SO worked for me. Here are the steps I took to connect my physical android device to the web service running on my laptop (connected to the phone) on localhost:
Enable USB debugging on your Android device
Run your web service on your machine. My web service runs on localhost, port 3000 in development: http://localhost:3000/api/...
Run ifconfig (Unix), or ipconfig (Windows)
Find your machine's inet address on your LAN interface. Mine is 10.0.0.121 for interface wlan0. Externally, it is 68.43.XX.XXX, which is not the address that you want to use.
Use the LAN IP since you are connecting to your service on LAN, otherwise you might get an econnrefused (connection refused) error due to firewall rules
Build your http URL with that IP address, and the port that your web service is running on. For me, it's http://10.0.0.121:3000/api/...
When you launch your app, you should connections to your local web service in logs, Wireshark, etc, and you should see the desired activity/data in your Android application.
I had the same issues, researched a lot then found out that you have to explicitly make changes in your firewall settings. Your firewall is blocking your code to be accessed from external source. So, all you need to do is, go to firewall settings, add port 80 (in my case since, I am using Apache http Server) for inbound and outbound. Now, you can test it on your phone's browser http://192.16..**:80/
I've done that on a Mac using GasMask and Charles Proxy Server. Your phone and your computer have to be on the same network.
say the webservice url you want to access is at http://api.xyz.com, you first use GasMask to point that url to your localhost, then use Charles to set up a proxy server. Then you go to the settings on your phone, go into Wi-Fi, long-press the network you are connected to, choose Modify Network, and enter the proxy settings Charles gave you.
In my case, nothing of these solutions works because Windows firewall blocks it, but putting a rule on the firewall hasn't effect.
The problem in my case is that my laptop is connected with Wifi and Windows had the Wifi connection like a Public network. I must to change the network connection to Private network. http://www.comofuncionatodo.net/tecnologia/informatica/como-cambiar-de-red-publica-a-red-privada-en-windows-10/
I agree with the other answers as good approaches if you don't want to expose your DEV webservice on the internet. However, it's much easier if you do just expose the webservice. There's a number of free DNS services, but I've found no-ip to be the easiest to set up. I use it for exactly the purpose that you asked about; so I can test with my DEV webservice on a real device.
If you choose to go with no-ip (I have no affiliation with that company, it's just the one I've used and am familiar with), you can get a free publicly accessible URL like http://MyExampleWebServer.no-ip-org, and no-ip has a utility you can install so even if you're behind a dynamic IP, it will always keep the correct external IP associated with that URL. If you're working from your house, then you'd just need to make sure you port forward traffic from port 80 to your internal 192.x.x.x IP address (or whatever port you use; maybe 443 for ssl).
It's as easy as that, and now you can hit that webservice from any device that can access the internet.
I haven't worked with it, but I believe dyndns also offers a similar service.
This solution is for GAE development server in Eclipse
Step 1: Get the LAN IP
Goto your Windows Command Console (Press Win+R, then type "cmd"). In the console, enter "ipconfig". You will see a list of display. Under Wireless LAN adapter Wi-Fi, get the IPv4 Address. It will be something 192.168.x.x
LAN IP : 192.168.x.x
Step 2:
Go to Eclipse, Open the Configured server
Under Properties of GAE Development Server -> Local Interface address to bind to, enter the LAN IP address, and save.
Step 3:
Now you can access the GAE server by
http://192.168.x.x:8888/
8888 - Refers to the Port Number, as mentioned in the GAE development server
In order to access local web services using their own server hosts rather than IP addresses with ports, do these following steps:
Make sure your Android device and your local machine are on the same network.
Install SquidMan on your Mac, Linux, or any other Proxy Server.
Configure the proxy server's HTTPPort (ex. 5555) and clients (ex. 192.168.0.0/24) to your own network mask, and run the proxy server.
You are either using the web services in:
a. A web browser: Configure the proxy settings of your Android device from Modify WiFi networks.
b. Android application:
Set up the Proxy for your HTTP client. If you are using Volley, check this out: Volley Behind a Proxy server.
You can now connect to it by using whatever URL you are using on your host to connect to the web service (ex. http://my-local-machine.com)
Hint: If you got 4xx response codes, make sure your web service allows connections from other non-local-hosts.
If you are referring your localhost on your system from the Android emulator then you have to use
http://10.0.2.2:8080/
Because Android emulator runs inside a Virtual Machine(QEMU) therefore here 127.0.0.1 or localhost will be emulator's own loopback address.