I have a function were in I need to update multiple dropdown lists.
Since I want to remove manual interventions, I want the test to automatically decide which data to be used.
I have 2 sets of array/variable on my main tests.
arrDefinition1 = ['Section;Sec1', 'Domain;test1', 'Process layer;test1', 'Skill;test1'];
arrDefinition2 = ['Section;Sec2', 'Domain;test2', 'Process layer;test2', 'Skill;test2'];
If the current value of the dropdown list is "Sec1" then arrDefinition2 will be used and vise-versa.
But due to promises, my IF condition was executed first before the IT and the variable that contains the value of getText contains "undefined", which means arrDefinition2 will always be used.
it('should click the Edit icon of the first row of Activity table', function() {
waitForElement(5, elmFirstRow, true);
editFirstRow.click();
waitForElement(5, element(by.id('section')), true);
element(by.id('section')).getText().then(function (tmpText) {
tempObject.strSection = tmpText;
});
});
if (tempObject.strSection == 'Sec1') {
console.log('first');
fillUpForm(0, tempObject.arrDefinition2, 'UpdateMDef');
} else {
console.log('second');
fillUpForm(0, tempObject.arrDefinition1, 'UpdateMDef');
}
Note: The function fillUpForm consists of IT functions.
Any suggestions are very much appreciated.
Related
I have a google form and a sheet that collects the responses which of course always appear at the bottom. I have been using the following script to copy the last response (which is always on the last row) from the Response sheet (Form Responses 2) to row two of another sheet (All Responses). When run by a trigger on Form Submit the script inserts a blank row into All Responses, then the copied values into another row above the blank row. Please can you help and tell me why and how I might change the script so the blank row is not added:
function CopyLastrowformresponse () {
var ss = SpreadsheetApp.getActive();
var AR = ss.getSheetByName("All Responses");
var FR = ss.getSheetByName("Form responses 2");
var FRlastrow = FR.getLastRow();
AR.insertRowBefore(2);
FR.getRange(FRlastrow, 1, FRlastrow, 22).copyTo(AR.getRange("A2"), SpreadsheetApp.CopyPasteType.PASTE_VALUES, false);
}
A few things could be going on here.
You're getting a number of rows equal to FRlastrow, when I think you only want to be getting 1 row.
Apps Script has buggy behavior with onFormSubmit() triggers, so you may to check duplicate triggers (see this answer).
The script isn't fully exploiting the event object provided by onFormSubmit(). Specifically, rather than getting the last row from one sheet, you could use e.values, which is the same data.
I would change the script to be something like this:
function CopyLastrowformresponse (e) {
if (e.values && e.values[1] != "") { // assuming e.values[1] (the first question) is required
SpreadsheetApp.getActive()
.getSheetByName("All Responses")
.insertRowBefore(2)
.getRange(2, 1, 1, e.values.length)
.setValues([e.values]);
}
}
But, ultimately, if all you want to do is simply reverse the order of the results, then I'd ditch Apps Script altogether and just use the =SORT() function.
=SORT('Form responses 2'!A:V, 'Form responses 2'!A:A, FALSE)
I have a logic hook that changes a field's value, but in order to see the change I need to refresh the whole page... I want it to refresh the field in real time.
So I'm trying to accomplish something like this(https://suitecrm.com/suitecrm/forum/suitecrm-7-0-discussion/21178-refresh-sub-panel-values-when-another-sub-panel-is-updated#75194)
But instead of reloading a whole subpanel through the controller.php I'm trying to find a way to refresh a single field.
Can anyone advise what method needs to be used to reload a field?
For example to reload a subpanel it's
**
showSubPanel('SUBPANEL_NAME',null,true);
**
But what is the JS method that reload a single field?
To refresh a detailView through a logic hook, you can use an easy "hack".
In your logic_hook, place the following js code as your last "echo" before your return or exit:
echo "<script>location.reload();</script>";
Simple but effective.
I couldn't find any built-in functions in suiteCRM that do it, spent a lot of time going through the chrome debugger, but nothing worked.
Here's a video that explains what's happening and the actual code example
https://youtu.be/ebuwWZoSYCk
You need to get the new status from the back-end then update the field inside the controller.php with:
document.querySelector('div[type="enum"][field="$field_to_update"]').innerHTML = "$inventory_status_c";
The whole controller.php file example is here, it all makes sense if you watch the 5 minute video:
class un_inventoryController extends SugarController {
/**
*
*/
function action_SubPanelViewer() {
require_once 'include/SubPanel/SubPanelViewer.php';
// only if this is creation of new sale under accounts, refresh the screen so the salerow subpanel will be refreshed too
if ( array_key_exists('module', $_REQUEST) && array_key_exists('subpanel', $_REQUEST) && array_key_exists('action', $_REQUEST) &&
$_REQUEST['module'] == 'un_inventory' && $_REQUEST['subpanel'] == "un_inventory_leads_1" && $_REQUEST['action'] == "SubPanelViewer") {
write_to_log(array("request" => $_REQUEST), "all conditions filled, custom controller called", true);
// Get the ID of the inventory unit so we can fetch the new status_c field and update the field right away (otherwise we'll have to refresh the page
$inventory = BeanFactory::getBean($_REQUEST["module"], $_REQUEST["record"]);
$inventory_status_c = ucwords(str_replace("_", " ", $inventory->status_c));
$field_to_update = "status_c";
$js=<<<EOQ
<script>
// Update the status
$( document ).ready(function() {
document.querySelector('div[type="enum"][field="$field_to_update"]').innerHTML = "$inventory_status_c";
});
</script>
EOQ;
echo $js;
}
}
}
?>
I'm creating a dynamic page in Wix which goes pretty well. Only struggling with one thing. I want a textfield in a repeater that is linked to a boolean in a database to display one text or another depending on the state of the boolean.
Because you mentioned you're on a dynamic page, I assume your repeater is connected to a dataset. This makes things a little more complicated because you have to wait for the dataset to load. If you would use onItemReady() to set your field values, the dataset would just overwrite them.
You want to do something like this:
$w.onReady(function () {
$w('#dataset1').onReady( () => {
$w('#repeater1').forEachItem( ($w, itemData, index) => {
if(itemData.boolField){
$w('#boolText').text = "Yes Ma'am!";
}
else {
$w('#boolText').text = "No way Jose!";
}
} );
} );
} );
Basically, you wait for the dataset to be ready, then loop through all the items in your repeater using the forEachItem() callback, and reset the value of the text field based on the value in the boolean field.
I've read all the documentation I can find and watched all the videos I can find and don't understand how to do this. I have set up an xPages REST Service and it works well. Now I want to place the results of the service into either a combobox or typeahead text field. Ideally I would like to know how to do it for both types of fields.
I have an application which has a view containing a list of countries, another view containing a list of states, and another containing a list of cities. I would like the first field to only display the countries field from the list of data it returns in the XPages REST Service. Then, depending upon which country was selected, I would like the states for that country to be listed in another field for selection, etc.
I can see code for calling the REST Service results from a button, or from a dojo grid, but I cannot find how to call it to populate either of the types of fields identified above.
Where would I call the Service for the field? I had thought it would go in the Data area, but perhaps I've just not found the right syntax to use.
November 6, 2017:
I have been following your suggestion, but am still lost as can be. Here's what I currently have in my code:
x$( "#{id:ApplCountry}" ).select2({
placeholder: "select a country",
minimumInputLength: 2,
allowClear : true,
multiple: false,
ajax: {
dataType: 'text/plain',
url: "./Application.xsp/gridData",
quietMillis: 250,
data: function (params) {
return {
search:'[name=]*'+params.term+'*',
page: params.page
};
},
processResults: function (data, page) {
var data = $.map(data, function (obj) {
obj.id = obj.id || obj["#entityid"];
obj.text = obj.text || obj.name;
return obj;
});
},
return {results: data};
}
}
});
I'm using the dataType of 'text/plain' because that was what I understood I should use when gathering data from a domino application. I have tried changing this to json but it makes no difference.
I'm using processResults because I understand this is what should be used in version 4 of select2.
I don't understand the whole use of the hidden field, so I've stayed away from that.
No matter what I do, although my REST service works if I put it directly in the url, I cannot get any data to display in the field. All I want to display in the field is the country code of the document, which is in the field named "name" (not my choice, it's how it came before I imported the data from MySQL.
I have read documentation and watched videos, but still don't really understand how everything fits together. That was my problem with the REST service. If you use it in Dojo, you just put the name of the service in a field on the Dojo element and it's done, so I don't understand why all the additional coding for another type of domino element. Shouldn't it work the same way?
I should point out that at some points it does display the default message, so it does find the field. Just doesn't display the country selections.
I think the issue may be that you are not returning SelectItems to your select2, and that is what it is expecting. When I do something like you are trying, I actually use a bean to generate the selection choices. You may want to try that or I'm putting in the working part of my bean below.
The Utils.getItemValueAsString is a method I use to return either the string value of a field, or if it is not on the document/empty/null an empty string. I took out an if that doesn't relate to this, so there my be a mismatch, but I hope not.
You might be able to jump directly to populating the arrayList, but as I recall I needed to leverage the LinkedHashMap for something.
You should be able to do the same using SSJS, but since that renders to Java before executing, I find this more efficient.
For label/value pairs:
LinkedHashMap lhmap = new LinkedHashMap();
Document doc = null;
Document tmpDoc = null;
allObjects.addElement(doc);
if (dc.getCount() > 0) {
doc = dc.getFirstDocument();
while (doc != null) {
lhmap.put(Utils.getItemValueAsString(doc, LabelField, true), Utils.getItemValueAsString(doc, ValueField, true));
}
tmpDoc = dc.getNextDocument(doc);
doc.recycle();
doc = tmpDoc;
}
}
List<SelectItem> options = new ArrayList<SelectItem>();
Set set = lhmap.entrySet();
Iterator hsItr = set.iterator();
while (hsItr.hasNext()) {
Map.Entry me = (Map.Entry) hsItr.next();
// System.out.println("after: " + hStr);
SelectItem option = new SelectItem();
option.setLabel(me.getKey() + "");
option.setValue(me.getValue() + "");
options.add(option);
}
System.out.println("About to return from generating");
return options;
}
I ended up using straight up SSJS. Worked like a charm - very simple.
I am writing a protractor test case to compare the name(s) of the displayed data is same as the searched name.
Even though my test case works fine, I am not able to understand what is happening. Because when i expect the name to compare, it compares as expected, but when i print the elementFinder's(rowData)(i have attached the output screen shot here) value in console.log, it show a huge list of some values which i am not able to understand?
PS: I am a newbie to protractor`
This is the testCase:
it('should show proper data for given last name', function () {
var searchValue='manning';
searchBox.sendKeys(searchValue);
search.click();
element.all(by.binding('row.loanNumber')).count().then(function(value) {
var loanCount = value;
for (var i = 0; i < loanCount; i++) {
var rowData = element.all(by.binding('row.borrowerName')).get(i).getText();
expect(rowData).toMatch(searchValue.toUpperCase());
console.log(rowData,'*****',searchValue.toUpperCase());
}
});
});`
And give me valuable suggestions about my style of code
rowData is a promise (not a value), so when you console.log it, you get the promise object
Protractor patches Jasmine to automatically resolve promises within the expect(), so that's how it knows to resolve the value and compare to the expected result.
If you want to console.log the value, you need to resolve the promise with .then() to get the value.
rowData.then(function(rowDataText) {
console.log(rowDataText);
)}
This is pretty much everyone's first question when they start using protractor. You will want to learn how promises work if you want a good understanding of how to manipulate them.