Getting
java.io.IOException: Cannot run program "C:\Program Files\NetBeans
8.2\bin\netbeans.exe" (in directory "C:\Program Files\NetBeans 8.2"):
CreateProcess error=2, The system cannot find the file specifiedat
java.lang.ProcessBuilder.start(ProcessBuilder.java:1048)
I tried downloading and installing netbeans and the JDK bundle and still getting this. Might be netbeans independent but my system that's causing it.
Note the location of the installer.
Open a Command Prompt running as administrator:
2.1. Go to Start button > All Programs > Accessories
2.2. Right click Command Prompt
2.3. Select Run as administrator
In the Command Prompt use the cd command to change to the directory containing the installer.
Execute the following command to extract the contents of the installer: [Note: You might need to change the name of the installer to match the one you have.]
netbeans-8.2-ml-java-windows.exe --extract
Execute the following command to manually execute the installer:
java -jar bundle.jar
You will see rapid scrolling output in the Command Prompt window for a few moments, then the installer window will appear to begin the installation process.
Once Netbeans is installed on Windows 7, you may also need to run Netbeans as an Administrator--especially for database, web application and web services development, which each require server resources.
Source
Related
I have generated an install4j Windows installer. I want the installer to run on a remote Windows machine and have to debug the installation process. The installed JVM is 1.8_161. I have tried several option in my vmoptions file:
-Xdebug
-agentlib:jdwp=transport=dt_socket,server=y,suspend=n,address=9999
or
-Xdebug
-Xnoagent
-Djava.compiler=NONE
-Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=9999
Neither configuration works. The vmoptions' file name is the same as the media file's name except the extension.
I hadn't any problems with debugging earlier remote installers.
Best regards
anko
The installer does not read a .vmoptions file for security reasons, because installers are often saved in writable locations when they are downloaded.
You have to pass -J-agentlib:jdwp=transport=dt_socket,server=y,suspend=n,address=9999 on the command line (note the -J prefix)
I have installed Epic in my Eclipse to run perl scripts. Unfortunately, iam getting the below error while trying to run the script.
Failed to execute command line: "perl" "-v"
Cannot run program "perl" (in directory "."): CreateProcess error=2, The system cannot find the file specified
When i tried to run "perl -v" in command prompt, it worked fine on the day i installed Epic. After restarting, the command does not work and the folder C:\Dwimperl became empty.
Note : The script did not run and showed the same error in eclipse even on the day i installed Epic.
I am using Windows 7, Eclipse Luna Release 2(4.4.2), and Perl 5 (before restart, now deleted)
These are the contents of my System PATH
E:\app\mevenk\product\12.1.0\dbhome_1\bin
C:\ProgramData\Oracle\Java\javapath
%SystemRoot%\system32
%SystemRoot%
%SystemRoot%\System32\Wbem
%SYSTEMROOT%\System32??\WindowsPowerShell\v1.0\
C:\Program Files (x86)\Sony\VAIO Startup Setting Tool
%JAVA_HOME%\
C:\Program Files (x86)\QuickTime\QTSystem\
C:\Program Files (x86)\Skype\Phone\
%M2_HOME%\bin
If not already done, In the eclipse perl EPIC preferences you need to set the full path to your perl interpreter:
e.g. In my Eclipse I have:
Window -> Preferences-> Perl EPIC-> Perl executable = "C:\DEV\TOOLS\perl\perl\bin\perl.exe"
Problem resolved after installing ActivePerl.
The problem is with perl Interpreter given with Epic (Dwimperl) which did not set the PATH variables and installables properly.
After installing ActivePerl, Eclipse took its path variables.
C:\Perl64\site\bin;C:\Perl64\bin;
Now, perl scripts working fine in Eclipse.
I have tried everything possible to install Netbean 7.3.1 on my Windows 8 OS supporting laptop. However, it was not going through from here https://netbeans.org/downloads/index.html.
This is the message I got after downloading all the software from mentioned link when tried to install for each download:
CRITICAll nullnull
I downloaded JDK (Name of the file: jdk-7u25-nb-7_3_1-windows-x64) and when I tried installing JDK I got an error says:
cannot find bundled JVM to run installer
Please can anyone share step-by-step instructions?
Open command prompt in the directory where your netbeans setup file is located. (to open cmd prompt, press shift and right click anywhere in the directory window and hit 'open command prompt here')
Now type the following command in command prompt
netbeans-8.0-windows.exe --tempdir C:\Temp --userdir C:\NBI
hit enter.
This is apparently a bug, though not in netbeans. Check out comments 9 and 10 for a possible work-around.
Hello I am new in Jboss as7. I plugged in the Jboss AS7 into eclipse, but the start button does not work properly. It shows An internal error occurred during: "Starting JBoss 7.0 Runtime Server".java.lang.NullPointerException.
Can I use the command window to start and stop the Jboss server?
The user guide is pretty clear on how to to this :)
http://community.jboss.org/wiki/JBossAS7UserGuide
I suggest you try the standalone mode first (from the guide above):
If you want to work in standalone mode, open a terminal and cd into the distribution's bin directory, and run the "standalone" launch script:
$ cd bin
$ ./standalone.sh
On Windows:
> cd bin
> standalone.bat
In the windows, Before run JBoss server you should check your java version. It works only java version 7. You should keep server file in C: drive, it is easily to configure. then set the JBOSS_HOME path and set it in the path variables. after finished this path setting,go to the bin folder.type,
cd bin
standalone.bat
If you are on Windows and your JBOSS_HOME environment variable is set you can also fire standalone.bat command directly from your command prompt to start your jboss server.
I downloaded installer postgresql-9.0.1-1-windows.exe from the official site, ran it, and then got an error:
An error occurred executing the Microsoft VC++ runtime installer
What is the reason for this error message?
Platform: Windows XP SP3, Dell Inspiron 1501. Processor: AMD Sempron 3500+
One of the reasons this can happen is because the installer attempts to install an older version of the VC++ runtime than what you are currently using.
See this installation log, found in your user's temporary directory (e.g. dd_vcredist_amd64_20190214193107.log):
[20C0:20E4][2019-02-14T19:31:07]e000: Error 0x80070666: Cannot install a product when a newer version is installed.
A workaround is to prevent the runtimes from installing with the --install_runtimes option:
postgresql-9.6.12-1-windows-x64.exe --install_runtimes 0
Create a shortcut of the downloaded file:
Right click of the shortcut → Properties → Shortcut. Add --install_runtimes 0 to the end of the file path:
Create a shortcut of your EXE file;
right click on the shortcut → add --install_runtimes 0 at the end of the target path, e.g.:
postgresql-9.3.1-1-windows-x64.exe --install_runtimes 0
save and run it :)
I was having a similar issue and found a fix that worked for me from Garrett_H in this forum post:
http://forums.enterprisedb.com/posts/list/1747.page#6180
Go to file %windir%\inf\wsh.inf, right click and select 'Install'
re-run postgresql installer
I'm running Windows XP Pro, and I was trying to install postgresql-8.3.17-1-windows.exe. I originally received the following error:
An error occurred executing the Microsoft C++ runtime installer.
First download and install Microsoft Visual C++ from the Microsoft website. Then run the installation from command with --install_runtimes 0.
In my case, when I was installing postgresql-11.0-1-windows-x64.exe on Windows 10, I had faced the same problem.
I just uninstalled the Microsoft Visual C++ Redistributable (the latest one for both 32 and 64 bit) and then tried to install postgresql-11.0-1-windows-x64.exe again, and it worked for me.
I too faced the same issue. I fixed it in the following way:
I visited the below site:
https://www.enterprisedb.com/downloads/postgres-postgresql-downloads
Choose the Download button under PostgreSQL Version 11.1 for Windows x86-64.
In one word, just try to install the latest version.
Try installing as administrator (using Run as administrator).
In version 9.0. PostgreSQL can be installed as a Windows administrator :)
Check if Windows Script Host (WSH) is enabled. If not enabled, details are here: PostgreSQL Installation Problem on Windows without WSH
Take special care that your Windows user's folder name does not contain spaces. PostgreSQL (as of version 9.2.2.1) handles that poorly. If I use this account on Windows XP, installation fails with the "An error occurred executing the Microsoft C++ runtime installer" message:
"C:\Documents and settings\Jimmy (admin)"
But it runs just fine with this:
"C:\Documents and settings\Jimmy-admin"
The spaces in "Documents and settings" don't seem to bother the installer. Go figure.
Go to file %windir%\inf\wsh.inf, right click, and select 'Install'.
Then re-run the PostgreSQL installer.
This works on Windows XP with PostgreSQL 8.4.17-1.
Windows Script Host (WSH) is unable to execute VBScript scripts. This can occur if the scripting host is disabled (which is unusual), or if the installation is broken. A sign of this problem is a message like
CScript Error: Can't find script engine "VBScript" for script "C:....
It can often be resolved by re-registering the VBScript interpreter, click Start * → * Run and enter the following and click OK:
regsvr32 %systemroot%\system32\vbscript.dll
I had the same problem while trying to install PostgreSQL version 11.1. I had to uninstall the Microsoft VC++ and run the installer again. It downloaded the required VC++ and the installation went successful.
I had these same problems and tried
manually installing MS VC++
bypassing VC++ installation on postgres
fixing windows update service
Still unsuccessful
Then I solved these problem by installing postgres manually:
extract the PostgreSQL installation contents to C:\PostgreSQL (you can copy from successful installation on other machines)
add C:\PostgreSQL\bin to PATH environment
run pg_ctl register -D D:\pgdata -N postgresql -U postgres -P <your postgres password>