The VSTS task: Generate Allure Report is failed.
The error is :
Unable to process command '##vso[results.publish type=Allure;mergeResults=true;publishRunAttachments=true;resultFiles=D:\a\1\s\allure-report\34;]' successfully. Please reference documentation (http://go.microsoft.com/fwlink/?LinkId=817296)
Unknown Test Runner.
Question: can it be a bug or problem connected to configs?
Configurations:
.Net version: 4.6.1, Nunit3, Nunit3 allure adapter
Task to run tests is a Command Line task where I used nunit3-console.exe to run test.
Configurations for Allure plugin:
Results directory : allure-results
Target directory : allure-report/$(Build.BuildNumber)
The output logs:
****************************************************************************** Starting: Generate Allure Report
============================================================================== Task : Generate Allure Report Description : Generates Allure
report based on the test results Version : 1.0.0 Author :
Molecula Help : More
Information
============================================================================== C:\Program Files\nodejs\node.exe
D:\a_tasks\AllureGenerate_5c975f9d-1c3a-469f-b7c2-8907bf3eacfb\1.0.0\node_modules\allure-commandline\bin\allure
generate --output D:\a\1\s\allure-report\34 D:\a\1\s\allure-results
Command aborted due to exception {}.
org.apache.commons.exec.ExecuteException: Process exited with an
error: 1 (Exit value: 1) at
org.apache.commons.exec.DefaultExecutor.executeInternal(DefaultExecutor.java:404)
at
org.apache.commons.exec.DefaultExecutor.execute(DefaultExecutor.java:166)
at
org.apache.commons.exec.DefaultExecutor.execute(DefaultExecutor.java:153)
at
ru.yandex.qatools.allure.command.ReportGenerate.runUnsafe(ReportGenerate.java:48)
at
ru.yandex.qatools.allure.command.AbstractCommand.run(AbstractCommand.java:52)
at ru.yandex.qatools.allure.CommandLine.main(CommandLine.java:46)
org.apache.commons.exec.ExecuteException: Process exited with an
error: 1 (Exit value: 1) at
org.apache.commons.exec.DefaultExecutor.executeInternal(DefaultExecutor.java:404)
at
org.apache.commons.exec.DefaultExecutor.execute(DefaultExecutor.java:166)
at
org.apache.commons.exec.DefaultExecutor.execute(DefaultExecutor.java:153)
at
ru.yandex.qatools.allure.command.ReportGenerate.runUnsafe(ReportGenerate.java:48)
at
ru.yandex.qatools.allure.command.AbstractCommand.run(AbstractCommand.java:52)
at ru.yandex.qatools.allure.CommandLine.main(CommandLine.java:46) at
ru.yandex.qatools.allure.data.AllureReportGenerator.generate(AllureReportGenerator.java:58)
at
ru.yandex.qatools.allure.data.AllureReportGenerator.generate(AllureReportGenerator.java:53)
at ru.yandex.qatools.allure.AllureMain.main(AllureMain.java:48)
Exception in thread "main"
ru.yandex.qatools.allure.data.ReportGenerationException: Could not
find any allure results at
ru.yandex.qatools.allure.data.AllureReportGenerator.generate(AllureReportGenerator.java:58)
at
ru.yandex.qatools.allure.data.AllureReportGenerator.generate(AllureReportGenerator.java:53)
at ru.yandex.qatools.allure.AllureMain.main(AllureMain.java:48)
Unable to process command '##vso[results.publish
type=Allure;mergeResults=true;publishRunAttachments=true;resultFiles=D:\a\1\s\allure-report\34;]'
successfully. Please reference documentation
(http://go.microsoft.com/fwlink/?LinkId=817296) Unknown Test Runner.
The default setting directory "allure-results" in the Allure task usually does not point to the actual path to result directory correctly since the path is different in different projects and environment. You need to update the setting to configure it to the actual path to the result directory manually.
According to the information you provided, the path to the result could be like this:
$(Build.SourcesDirectory)\SolutionFolder\ProjectFolder\bin\$(BuildConfiguration)\allure-results
Related
Our Jenkins server has been successfully building projects for years using Powershell to run a cake script. Out of the blue today, we started getting the following error on multiple projects:
12:10:46 Running build script...
12:10:46
12:10:46 Error: Unknown command 'Default'.
12:10:46
12:10:46 .\scripts\build.cake -target=Default -configuration=Release
12:10:46 -verbosity=Verbose -environment=dev -certificatePath=C:/Program Files
12:10:46 (x86)/xxxxx/Verisign Certificate -certificateName=xxxxxxxx_cert.pfx
12:10:46 -certificatePassword=xxxxxxxxxxx
12:10:46 ^^^^^^^ No such command
12:10:46
12:10:47 Build step 'Windows PowerShell' marked build as failure
The build.ps1 script has not changed. The build.cake script has not changed. Jenkins was not updated since the last successful builds nor any of the add-ins.
If I remove "-target=Default" from the argument list, I just get the same error on "-configuration=Release" indicating unknown command: "Release".
Has anyone else experienced this?
The possible root cause of this failure is the cake version update (0.38.x --> 1.0)
You have two ways to fix this issue
Change the Argument Syntex - arguments should always be called with multi-dash syntax (e.g. --target=Foo) instead of (e.g. -target=Foo)
Refer: https://cakebuild.net/docs/getting-started/upgrade
Pinning the cake version
Specified the version of Cake in the tools/packages.config file
Refer: https://cakebuild.net/docs/writing-builds/reproducible-builds/pinning-cake-version
In appveyor I use the statement:
- initexmf --admin --force --mklinks
but due to a problem it gives the message:
initexmf --admin --force --mklinks
Sorry, but "MiKTeX Configuration Utility" did not succeed for the following reason:
Script configuration file not found.
The log file hopefully contains the information to get MiKTeX going again:
C:\ProgramData\MiKTeX\2.9\miktex\log\initexmf_admin.log
The system cannot find the path specified.
Command exited with code 1
due to the error code the process terminates and I cannot type the C:\ProgramData\MiKTeX\2.9\miktex\log\initexmf_admin.log anymore, so a bit hard to debug ...
questions:
How to continue after an error
How to stop after the outputting the file (exit 1 ?)
To run a script on failure use on_failure section, for example to push initexmf_admin.log to artifacts:
on_failure:
- appveyor PushArtifact C:\ProgramData\MiKTeX\2.9\miktex\log\initexmf_admin.log
I'm trying to use stack to set up the yesod-postgres template project on my Windows machine. Unfortunately, when I run stack build I get the following result:
pg-project-0.0.0: build
Preprocessing library pg-project-0.0.0...
In-place registering pg-project-0.0.0...
Preprocessing executable 'pg-project' for pg-project-0.0.0...
Linking .stack-work\dist\95439361\build\pg-project\pg-project.exe ...
C:/Users/Rik/AppData/Local/Programs/stack/i386-windows/ghc-7.10.3/mingw/bin/ld.exe: cannot find -lpq
collect2.exe: error: ld returned 1 exit status
-- While building package pg-project-0.0.0 using:
C:\stack_root\setup-exe-cache\i386-windows\setup-Simple-Cabal-1.22.5.0-ghc-7.10.3.exe --builddir=.stack-work\dist\95439361 build lib:pg-project exe:pg-project --ghc-options " -ddump-hi -ddump-to-file"
Process exited with code: ExitFailure 1
I've added C:\PostgreSQL\bin to my PATH, and I'm using the 32-bit version of PostgreSQL 9.5.
Any help is appreciated.
I'm trying to run command line -custom script on Teamcity and getting this error (127):
[02:22:25][Step 1/1] /mnt/teamcity/temp/agentTmp/custom_script8657691082445726475: 1: /mnt/teamcity/temp/agentTmp/custom_script8657691082445726475: ./run.sh: not found
[02:22:25][Step 1/1] Process exited with code 127
[02:22:26][Step 1/1] Step run protractor test (Command Line) failed
any ideas?
It looks like some dependency of your script is not found where it expects it:
./run.sh: not found
Is that the actual script you are running? or is your script trying to call that script?
what solved it was adding 'Agent Requirements' (under build Configuration Settings) saying that 'system.agent.name' equals to the name of the Agent we use.
We have a Scala project and we use SBT as its build tool.
our CI tool is TeamCity, and we build the project using the command line custom script option with the following command:
call %system.SBT_HOME%\bin\sbt clean package
The build process works fine when the build succeeds, however, when compilation fails - TeamCity thinks that the script exited with exitCode 0 and not 1 as expected, this cause TeamCity build to succeed although the compilation failed.
when we run the same commands on local cmd we see that the errorLevel is 1.
the relevant part of the build log:
[11:33:44][Step 1/3] [error] trait ConfigurationDomain JsonSupport extends CommonFormats {
[11:33:44][Step 1/3] [error] ^
[11:33:44][Step 1/3] [error] one error found
[11:33:45][Step 1/3] [error] (compile:compile) Compilation failed
[11:33:45][Step 1/3] [error] Total time: 12 s, completed Jan 9, 2014 11:33:45 AM
[11:33:45][Step 1/3] Process exited with code 0
how can we make TeamCity recognize the failure of the build?
Try explicitly exit with:
call %system.SBT_HOME%\bin\sbt clean package
echo the exit code is %errorlevel%
exit /b
If you can't get the process to output a non-zero exit code then you could use a build failure condition based on specific text in the build log. See this page for the documentation but in essence you can get the build to fail if it finds the text error found in the build log.