I am using gdcmanon to anonimize dicom files like the following:
LD_LIBRARY_PATH=../lib ./gdcmanon --certificate CA_cert.cer -e ./dump ./dump/anon
But it gives the following error:
Error: In /home/travis/build/malaterre/GDCM/Source/Common/gdcmCryptoFactory.cxx, line 61, function static gdcm::CryptoFactory* gdcm::CryptoFactory::GetFactoryInstance(gdcm::CryptoFactory::CryptoLib)
No crypto factory registered with id 1
Requested cryptoraphic library not configured.
How can I solve this?
The error is because of binaries you use, it looks like SSL dependencies are not satisfied.
As a solution (workaround?), you can get the binaries via apt system. For Ubuntu 16.04 Xenial distribution, there is version 2.6.3 of libgdcm-tools package.
Another possibility is to compile gdcm from scratch, but you need development files of OpenSSL (apt install libssl-dev). Moreover, to use anonymisation with certificates, in CMake system set GDCM_USE_SYSTEM_OPENSSL=YES.
Related
I am trying to install SQL Developer on my laptop. I've download the file from Oracle and follow the instruction, I have RPM installed, but when I run rpm -Uhv sqldeveloper-21.4.3-063.0100.noarch.rpm, I encountered the following:
rpm: RPM should not be used directly install RPM packages, use Alien instead!
rpm: However assuming you know what you are doing...
warning: RPM v3 packages are deprecated: sqldeveloper-21.4.3-063.0100.noarch
error: Failed dependencies:
/bin/sh is needed by sqldeveloper-21.4.3-063.0100.noarch
What can I try next?
It looks like you are trying to run a package made for redhat based systems, but PopOS is debian based.
To proceed with the installation you must first install rpm2cpio, then you can extract it by running the command "# rpm2cpio datamodeler-21.4.2.059.0838-1.noarch.rpm", then you can access the extracted directory.
Then you can use the command "# ./sqldeveloper.sh" to run the application.
But, ensure you have a JDK installed You will be prompted to enter a jdk path. (ie usr/java/jdk1.8.0_181) SQL Developer will automatically launch once jdk location is provided
I've created a python application which uses Postgresql. I used psycopg2 library (v 2.8.4) when doing the development, but when trying to install it on the beanstalk, it gives the following error:
Error: pg_config executable not found.
pg_config is required to build psycopg2 from source. Please add the directory
containing pg_config to the $PATH or specify the full executable path with the
option:
python setup.py build_ext --pg-config /path/to/pg_config build ...
or with the pg_config option in 'setup.cfg'.
If you prefer to avoid building psycopg2 from source, please install the PyPI
'psycopg2-binary' package instead.
For further information please check the 'doc/src/install.rst' file (also at
<http://initd.org/psycopg/docs/install.html>).
Anyone have idea how to solve this?
Found the answer to the question. Instead of installing the psycopg2 directly, use psycopg2-binary==2.8.4.
Similar question is also being asked here
I am trying to install memcached with Pecl and Pear. When I run this command
Abrams-MacBook-Air-3:recurly abramhandler$ sudo pecl install memcached --with-libememcached-dir=/usr/lib/libmemcached-1.0.17/libmemcached
I get the following error
checking for libmemcached location... configure: error: memcached support requires libmemcached 1.0.x. Use --with-libmemcached-dir=<DIR> to specify the prefix where libmemcached headers and library are located
ERROR: `/private/tmp/pear/install/memcached/configure' failed
This dir contains a lot of header files, but seems to maybe be the wrong one?
/usr/lib/libmemcached-1.0.17/libmemcached
What headers is memcached looking for? What directory should I include in the install command?
pecl does not allow passing configuration arguments when compiling extensions.
You have to extract the archive yourself and do the installation yourself, too. Instructions can be found on http://cweiske.de/tagebuch/phpfarm-install-extensions.htm
I have encountered a problem installing Pango-1.30 on a Ubuntu 12.04 platform. During ./configure step I receive a message saying "Could not enable any of Freetype, X11, Cairo, or Win32 backends. Must have at least one backend to build Pango". However, I have build and installed Freetype and X11 and they are located in /usr/bin. How do I inform ./configure where to get them?
Thanks,
Mark Allyn
Ensure you have all the dependencies installed, you can find them in the README file.
They are:
fontconfig
FreeType
HarfBuzz
My ultimate goal is to run a twiki website for my research group.
I have space on RedHat server that is running Apache, etc., but upon which I do not have root access. Since I cannot install perl modules with the current permissions, I've decided to manually install a local version of perl. Got that working no problem. The following modules are required to get twiki to work:
FreezeThaw - http://search.cpan.org/~ilyaz/FreezeThaw
CGI::Session - http://search.cpan.org/~markstos/CGI-Session
Error - http://search.cpan.org/~shlomif/Error
GD - http://search.cpan.org/~lds/GD
HTML::Tree - http://search.cpan.org/~petek/HTML-Tree
Time-modules - http://search.cpan.org/~muir/Time-modules
I have installed FreezeThaw, CGI, Error, and it fails on GD with the following error:
UNRECOVERABLE ERROR Could not find gdlib-config in the search path.
Please install libgd 2.0.28 or higher. If you want to try to
compile anyway, please rerun this script with the option --ignore_missing_gd.
In searching for how to get around this newest obstacle, I found a previous SO question: How to install GD library with Strawberry Perl asked about installing this and the top answer suggested manually compiling gdlib. You'll note, however, that that link is broken. The base site: http://www.libgd.org/ is basically down saying to go to the project's bitbucket page.
So I got the tarball from that page and am trying to install it. The following problems occur when I follow the instructions included. README.TXT says: "If the sources have been fetched from CVS, run bootstrap.sh [options]."
Running bootstrap.sh yields:
configure.ac:64: warning: macro `AM_ICONV' not found in library
configure.ac:10: required directory ./config does not exist cp: cannot
create regular file `config/config.guess': No such file or directory
configure.ac:11: installing `config/config.guess' configure.ac:11:
error while copying cp: cannot create regular file
`config/config.sub': No such file or directory configure.ac:11:
installing `config/config.sub' configure.ac:11: error while
copying cp: cannot create regular file `config/install-sh': No such
file or directory configure.ac:28: installing `config/install-sh'
configure.ac:28: error while copying cp: cannot create regular
file `config/missing': No such file or directory configure.ac:28:
installing `config/missing' configure.ac:28: error while copying
configure.ac:577: required file `config/Makefile.in' not found
configure.ac:577: required file `config/gdlib-config.in' not found
configure.ac:577: required file `test/Makefile.in' not found
Makefile.am:14: Libtool library used but `LIBTOOL' is undefined
Makefile.am:14: The usual way to define `LIBTOOL' is to add
AC_PROG_LIBTOOL' Makefile.am:14: to configure.ac' and run
aclocal' and autoconf' again. Makefile.am:14: If `AC_PROG_LIBTOOL'
is in `configure.ac', make sure Makefile.am:14: its definition is in
aclocal's search path. cp: cannot create regular file
`config/depcomp': No such file or directory Makefile.am: installing
`config/depcomp' Makefile.am: error while copying Failed
And it says I should also install the following 3rd party libraries:
zlib, available from http://www.gzip.org/zlib/
Data compression library
libpng, available from http://www.libpng.org/pub/png/
Portable Network Graphics library; requires zlib
FreeType 2.x, available from http://www.freetype.org/
Free, high-quality, and portable font engine
JPEG library, available from http://www.ijg.org/
Portable JPEG compression/decompression library
XPM, available from http://koala.ilog.fr/lehors/xpm.html
X Pixmap library
Which I am ignoring for now.
Switching to the generic instructions it says follow the advice in the INSTALL file; which says: "cd to the directory containing the package's source code and type ./configure to configure the package for your system." Which flat does not work: I've cd'ed into every directory of the tarball and running that command does nothing.
So, trying to install twiki required me to install perl, which required me to install the perl modules: FreezeThaw, CGI, Error, HTML, Time-modules, and GD -- which itself required me to install gdlib -- which further suggested I install zlib, libpng, FreeType 2.x, JPEG library, and XPM. And of course, I'm stuck at the installing gdlib stage.
My question is: what other process can possibly demean humanity to such a level? I cannot fathom the depths of cruelty that lay ahead of me as I dive ever deeper into this misery onion. Should I just end it all? Can meaning be brought from this madness? Will the sun come up tomorrow, and if so, does it even matter?
But seriously, any suggestions on what to do differently/better would be much appreciated -- I can't remember what a child's laughter sounds like anymore.
Install the package gd-devel, it contains /usr/bin/gdlib-config.
This should work:
sudo apt-get -y install libgd2-xpm-dev build-essential