I have the next error when I try to execute an activii workflow:
org.alfresco.scripts.ScriptException: 02190005 Failed to execute
supplied script: 02190004 ReferenceError: "bpm_assignees" is not
defined. (AlfrescoJS#3)
In my process I don´t use that variable. I'm using bpm_group_assignee, no bmp_assignees, so I don't understand why.
Related
The purpose is to debug only one unit test in the exs file, therefore it is necessary to ignore other unit tests in the same exs file.
My previous solution is comment out the other unit test, but the bad side of this solution is I can't find other unit tests easily through vscode's outline view as follows:
From the mix doc, it is found that mix command has --include and --only option.
I have adjusted launch.json file as follows, update task args as --trace --only :external, and update the exs file, but when runing mix test, it gives the error message.
Remember to keep good posture and stay hydrated!
helloworld
(Debugger) Task failed because an exception was raised:
** (Mix.Error) Could not invoke task "test": 1 error found!
--trace --only :external : Unknown option
(mix 1.13.4) lib/mix.ex:515: Mix.raise/2
(elixir_ls_debugger 0.10.0) lib/debugger/server.ex:1119: ElixirLS.Debugger.Server.launch_task/2
Then I changed launch.json to "--trace --only :external", similar error message as follows:
(Debugger) Task failed because an exception was raised:
** (Mix.Error) Could not invoke task "test": 1 error found!
--trace --only :external : Unknown option
(mix 1.13.4) lib/mix.ex:515: Mix.raise/2
(elixir_ls_debugger 0.10.0) lib/debugger/server.ex:1119: ElixirLS.Debugger.Server.launch_task/2
I use a plugin called Elixir Test. It has a few nice features including what you are asking for.
To run a single test place your cursor within the code of the test, then select "Elixir Test: Run test at cursor" from the command palette.
Another helpful command is: "Elixir Test: Jump". If you are editing a module file, this command will jump to the test file corresponding to the module. It will optionally create the skeleton for the test file if you haven't created it yet.
It is caused by syntax problem. Every paremeter should be one element as follows:
"taskArgs": [
"--trace", "--warnings-as-errors", "--only", "external"
],
I am attempting to write a check in my Cake build script to pull in a file from BuildParameters and check if the file contents are empty -- if contents are empty, throw an exception and quit the build.
I am attempting to use FileReadText from the FileHelpers namespace but for some reason I cannot get my build to recognize the file command. I am following the syntax and documentation found here: https://cakebuild.net/api/Cake.FileHelpers/FileHelperAliases/97F5679A
Here is the code I am trying in build.cake:
var fileReadText= FileReadText(Parameters.TestParameters.TestListFP);
var fileText= fileReadText.ThrowIfNullOrEmpty(nameof(fileReadText));
The argument Parameters.TestParameters.TestListFP is set in my Parameters.cake file as such:
TestListFP = context.File("C:\Some\Path\some_file_name.txt");
Using the above code, I see this error:
error CS0103: The name 'FileReadText' does not exist in the current
context
Note that I do not have a ICakeContext in build.cake, just BuildParameters.
I tried to resolve the issue by adding using Cake.FileHelpers; at the top of my build.cake file, but then I see this error:
The type or namespace name 'FileHelpers' does not exist in the namespace 'Cake' (are you missing an assembly reference?)
The script works fine without my FileReadText code, so I know TestListFP is actually a valid file.
I think I am inherently misunderstanding how to use FileHelpers and FileReadText and I could not find any examples of usage in documentation or anywhere else. If anyone has guidance on how to use this method, or a better way to accomplish what I am trying to do, I would appreciate the help.
Have you added the #addin pre-processor directive, as mentioned here:
https://github.com/cake-contrib/Cake.FileHelpers/#cakefilehelpers
You can easily reference Cake.FileHelpers directly in your build script via a cake addin:
#addin "Cake.FileHelpers"
I'm trying to run a script in an OR split and I keep on getting the error below. According to this page, "graniteWorkItem" is included in the list of "variables that are immediately available to process scripts, providing access to objects of the workflow Java API" (quoted from the link).
observations:
I tried "workItem" which I believe is the variable for CQ5? same error.
I removed the OR Split and then inserted a dynamic participant step. On the participant chooser, I selected Workflow Initiator Participant Chooser (Script). I then used the code below and ticked "email". I tried both "workItem" and "graniteWorkItem" variable names. I ran the workflow under my other acct and using both variable names, I got an email and no errors in error.log
Any ideas what I'm doing wrong?
OR split script (with error. see below)
function check() {
var workflowData = graniteWorkItem.getWorkflowData();
return false;
}
dynamic participant script (no error with graniteWorkItem in the error.log)
function getParticipant() {
return graniteWorkItem.getWorkflow().getInitiator();
}
error from error.log
> tail -f error.log | grep -i "graniteWorkItem"
var workflowData = graniteWorkItem.getWorkflowData();
} : Failure running script /libs/workflow/scripts/dynamic.ecma: ReferenceError: "graniteWorkItem" is not defined. (NO_SCRIPT_NAME#2)
org.apache.sling.api.scripting.ScriptEvaluationException: Failure running script /libs/workflow/scripts/dynamic.ecma: ReferenceError: "graniteWorkItem" is not defined. (NO_SCRIPT_NAME#2)
Caused by: org.mozilla.javascript.EcmaError: ReferenceError: "graniteWorkItem" is not defined. (NO_SCRIPT_NAME#2)
var workflowData = graniteWorkItem.getWorkflowData();
com.adobe.granite.workflow.WorkflowException: org.apache.sling.api.scripting.ScriptEvaluationException: Failure running script /libs/workflow/scripts/dynamic.ecma: ReferenceError: "graniteWorkItem" is not defined. (NO_SCRIPT_NAME#2)
Caused by: org.apache.sling.api.scripting.ScriptEvaluationException: Failure running script /libs/workflow/scripts/dynamic.ecma: ReferenceError: "graniteWorkItem" is not defined. (NO_SCRIPT_NAME#2)
I am not a 100% sure, but isn't workflowData available in the check() method anyway - without taking it from a work item?
I use Anonymous Python Functions in BitBake recipes to set variables during parsing.
Now I wonder if I can check if a specific variable is set or not. If not, then I want to generate a BitBake Error, which stops the build process.
Pseudo code, that I want to create:
python __anonymous () {
if d.getVar('MY_VARIABLE', True) == "":
<BITBAKE ERROR with custom message "MY_VARIABLE not found">
}
You can call bb.fatal("MY_VARIABLE not set") which will print that error and abort the build by throwing an exception.
Beware that d.getVar() returns None when the variable is unset. You only get the empty string if that's your default value.
Outputs are possible on different loglevels and with python as well as shell script code
For usage in python there are:
bb.fatal
bb.error
bb.warn
bb.note
bb.plain
bb.debug
For usage in shell script there are:
bbfatal
bberror
bbwarn
bbnote
bbplain
bbdebug
for example if you want to throw an error in your recipe's do_install_append function:
bbfatal "something went terribly wrong!"
I am new to S-Functions and Real TIme WorkShop. The S-Function has been created using an Embedded Matlab Function. The S-Function Works fine, but when i try to build the same, i get the following error report:
It appears that the build process was unable to locate some utility (e.g. make, compiler, linker, etc.). Please verify your path and tool environment variables are correct. You should be able to execute the make command: .\Radius_S_func2.bat at an MS DOS Command Prompt in the directory: C:\Users\skaushik\Desktop\Matlab Models\WIP\TESTs\Sfunc_2\Radius_S_func2_Source Currently, this generates the following error:
C:\Users\skaushik\Desktop\Matlab Models\WIP\TESTs\Sfunc_2\Radius_S_func2_Source>set MATLAB=C:\MATLAB\R2010b
C:\Users\skaushik\Desktop\Matlab Models\WIP\TESTs\Sfunc_2\Radius_S_func2_Source>.......\u_Utils\Build\make -f Radius_S_func2.mk GENERATE_REPORT=0 INCLUDE_MDL_TERMINATE_FCN=0 COMBINE_OUTPUT_UPDATE_FCNS=1 MAT_FILE=0 MULTI_INSTANCE_CODE=0 INTEGER_CODE=0 PORTABLE_WORDSIZES=0 GENERATE_ERT_S_FUNCTION=0 GENERATE_ASAP2=0 EXT_MODE=0 EXTMODE_STATIC_ALLOC=0 EXTMODE_STATIC_ALLOC_SIZE=1000000 EXTMODE_TRANSPORT=0 TMW_EXTMODE_TESTING=0 MODELLIB=Radius_S_func2lib.lib RELATIVE_PATH_TO_ANCHOR=.. MODELREF_TARGET_TYPE=NONE OPTS="-DRT -DUSE_RTMODEL -DERT" The system cannot find the path specified.
PLease guide me how to understand the error, so i can take care of it myself.
Thank you!!
Solution: The build target was not specified therefore matlab gave the above mentioned error. To resolve this one should specify the build environment for a specific target.