I have installed the apic editor in Windows 10. I often get a 'Building v5 Gateway' error pop-up, when starting the the local server on the Assemble tab. The message says: "Error: It appears that Docker for Windows has not been installed..."
That's true - I'm not using it and don't want to use it! I did find a suggested fix (which I can't find now), which said: "set NO_PROXY=127.0.0.1".
This has appeared to work sometimes, but now it doesn't. It has worked when I set that variable in one command and followed it by 'apic edit'. I have since realised that you can chain 'set' cmds using && before 'apic edit'. I hoped that chaining NO_PROXY and 'apic'edit' would do the trick... but it didn't.
What kind of works, is to issue 'apic start' in a separate window. I end up with a running 'node.exe' window, and a failed 'Node.js' window... because it can't find an 'env.yaml' file (I've tracked down that this is because I started it outside the Designer). Which means I can test the api call.
I expect to be helping a customer to get started with APIC and this behaviour is not going to impress them. How can I get 'normal' service to be resumed?
Regards, John
Try to install docker for windows. Here is the link : Install Docker and restart your computer.
Solution
Make sure any gateway instances are stopped
apic stop
Start the API Designer
apic edit
Within the API Designer, select your API and go to Assemble
Make sure the policy palette panel in the left isn't collapsed. If it is, click the right arrow button ()
At the top of the policy palette panel, click the filter policies button ()
Make sure you select Micro Gateway policies
Click save ()
Now click the play button () in the lower left to start the micro gateway
Alternatively, edit the Swagger yaml file for the API and make sure the micro gateway is configured:
x-ibm-configuration:
gateway: micro-gateway
Note that if you've added any DataPower Gateway policies to your API, they will be disabled when running the micro gateway.
Details
API Connect requires a gateway to work. There are two different gateways:
The micro gateway, which is open-source but is much more limited. When running this in conjunction with the API Designer, the micro gateway will run as a Node.js app directly on your local machine.
The DataPower Gateway, which is a commercial product but can be used for free for development purposes. When running this with the API Designer, it will run as a container in Docker based on this image.
What kind of works, is to issue 'apic start' in a separate window.
By running apic start, you've manually started the micro gateway:
$ apic start
Service apic-gw started on port 4001.
$ apic services
Service apic-gw running on port 4001.
$ ps -eo command | grep gateway
/home/user/.nvm/versions/node/v6.14.4/bin/node /home/user/.nvm/versions/node/v6.14.4/lib/node_modules/apiconnect/node_modules/microgateway/datastore/server/server.js
The better way to start the gateway is from within the API Desginer by clicking the start button in the lower left. This will start the appropriate gateway for your API. If you see the "Building v5 Gateway" message, you've started the DataPower Gateway.
Related
Following the doc from Rundeck, however the only button I have under "Sources tab" is "ResourceModelSource"
When I click that button I get a blank
PPS Issue happened on previous version - new to RunDeck, so I can't say that it EVER worked
I tried adding a manual resouces.xml in the project director y(Which I had to manually create, which tells me that's another issue) and reloading RD but that did not seem to work
While it's not the likely cause, I'll mention it here incase it IS relevant, I'm hosting on port 4440 however I'm using nginx to forward http (not https) requests on 443 to 4440, this is due to corp net sec policy.
I'm sure it's something where it's having an i/o issue on the local host, however I'm not seeing anything in the logs.
That is a known issue when you have Rundeck installed behind a proxy server, take a look at this: https://github.com/rundeck/rundeck/issues/6278 the solution is to set the grails.ServerURL (rundeck-config.properties file) with the exit URL defined for Rundeck in your proxy server (e.g: grails.serverURL=http://my_domain/rundeck), then restart the Rundeck service.
i want to use the "Mock Server" feature provided with https://restbird.org/ .
When starting restbird via the provided docker image, it listens on localhost:8080 by default.
Unfortunately the configured "Mock Server" instances still need to be started via the Web Frontend as it is described in the documentation here:
https://restbird.org/docs/mock-run.html#run-mock-server
Is there a way to automatically start the "Mock Server" instances when running the docker image without logging in into the backend (via admin/admin) and clicking the "start" button ?
Reason is, i want to start the mock server inside a gitlab pipeline where i have no further interaction possibilities after the container has been started.
I can not find anything like this in the documentation.
Thanks a lot for any clues - or if it is not possible i cam make a feature request.
I have found the solution myself. One can start a specific Mock Server as described in:
https://restbird.org/docs/API-MockServer.html#start-specific-mockserver-case
This can be scripted into my pipeline after executing the docker run command.
I have create a small script file to test.
This my script.bat file.
sc create myService binpath= C:\Users\Admin\Desktop\test.bat start= auto
This is my test.bat file.
echo "Welcome to Wizard"
Problem Statement
I am unable to start the service from control panel Service section.
I get following error.
[SC] StartService FAILED 1053:
The service did not respond to the start or control request in a timely fashion.
That is why I am using nssm.
NOW what happening is that when I run following command on powershell
.\nssm install myService, I dialogue box appears. I give it the path of my script file and click on install service.
After successfull installation of service. I go to control panel -> Service -> click on start against myService but it get paused and following dialog box appears
How can I fix this?
Is there anyother way to do it without doing manual steps and not using third party tool.
I am doing all this on window 10. Do I need any server to perform this task?
NOTE: I cannot use Always up or window scheduler in my case.
The NSSM behaviour is caused by the script terminating almost instantly. Try the following script:
echo Hello World
pause
This should allow the service to start, but you will not necessarily see a console window. Even if you tick 'allow service to interact with desktop', it will not be your desktop that it interacts with!
Windows implements 'session zero isolation' as a security feature, and this essentially prevents services interacting with end user desktops.
In terms of a solution, it's possible to write Windows 'service' applications fairly simply using Visual Studio. It's outside my area of expertise, but based on the Windows applications I'm familiar with, you would generally have a user-mode application running to provide desktop interaction. The user-mode application can interact with services hosted by the service application.
Probably this is resolved by now, but in case it helps anyone, what saved the day for me was checking again my input in the arguments field in nssm. I had an extra "-" which created the error. To edit my service, I went via nssm edit <servicename>
I would also add on the fix that worked for me. I added "" (quotes) in the argument path and that solved the issue for me.
I have setup the apache cloudstack on CentOS 6.8 machine following quick installation guide. The management server and KVM are setup on the same machine. The management server is running without problems. I was able to add zone, pod, cluster, primary and secondary storage from the web interface. But when I tried to add an instance it is not showing any templates in the second stage as you can see in the screenshot
However, I am able to see two templates under Templates link in web UI.
But when I select the template and navigate to Zone tab, I see Timeout waiting for response from storage host and Ready field shows no.
When I check the management server logs, it seems there is an error when cloudstack tries to mount secondary storage for use. The below segment from cloudstack-management.log file describes this error.
2017-03-09 23:26:43,207 DEBUG [c.c.a.t.Request] (AgentManager-Handler-
14:null) (logid:) Seq 2-7686800138991304712: Processing: { Ans: , MgmtId:
279278805450918, via: 2, Ver: v1, Flags: 10, [{"com.cloud.agent.api.Answer":
{"result":false,"details":"com.cloud.utils.exception.CloudRuntimeException:
GetRootDir for nfs://172.16.10.2/export/secondary failed due to
com.cloud.utils.exception.CloudRuntimeException: Unable to mount
172.16.10.2:/export/secondary at /mnt/SecStorage/6e26529d-c659-3053-8acb-
817a77b6cfc6 due to mount.nfs: Connection timed out\n\tat
org.apache.cloudstack.storage.resource.NfsSecondaryStorageResource.getRootDir(Nf
sSecondaryStorageResource.java:2080)\n\tat
org.apache.cloudstack.storage.resource.NfsSecondaryStorageResource.execute(NfsSe
condaryStorageResource.java:1829)\n\tat
org.apache.cloudstack.storage.resource.NfsSecondaryStorageResource.executeReques
t(NfsSecondaryStorageResource.java:265)\n\tat
com.cloud.agent.Agent.processRequest(Agent.java:525)\n\tat
com.cloud.agent.Agent$AgentRequestHandler.doTask(Agent.java:833)\n\tat
com.cloud.utils.nio.Task.call(Task.java:83)\n\tat
com.cloud.utils.nio.Task.call(Task.java:29)\n\tat
java.util.concurrent.FutureTask.run(FutureTask.java:262)\n\tat
java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)\
n\tat
java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)\
n\tat java.lang.Thread.run(Thread.java:745)\n","wait":0}}] }
Can anyone please guide me how to resolve this issue? I have been trying to figure it out for some hours now and don't know how to proceed further.
Edit 1: Please note that my LAN address was 10.103.72.50 which I assume is not /24 address. I tried to give CentOs a static IP by making the following settings in ifcg-eth0 file
DEVICE=eth0
HWADDR=52:54:00:B9:A6:C0
NM_CONTROLLED=no
ONBOOT=yes
BOOTPROTO=none
IPADDR=172.16.10.2
NETMASK=255.255.255.0
GATEWAY=172.16.10.1
DNS1=8.8.8.8
DNS2=8.8.4.4
But doing this would stop my internet. As a workaround, I reverted these changes and installed all the packages first. Then I changed the IP to static by the same configuration settings as above and ran the cloudstack management. Everything worked fine untill I bumped into this template thing. Please help me figure out what might have went wrong
I know I'm late, but for people trying out in the future, here it goes:
I hope you have successfully added a host as mentioned in Quick Install Guide before you changed your IP to static as it autoconfigures VLANs for different traffic and creates two bridges - generally with names 'cloud' or 'cloudbr'. Cloudstack uses the Secondary Storage System VM for doing all the storage-related operations in each Zone and Cluster. What seems to be the problem is that secondary storage system vm (SSVM) is not able to communicate with the management server at port 8250. If not, try manually mounting the NFS server's mount points in the SSVM shell. You can ssh into the SSVM using the below command:
ssh -i /var/cloudstack/management/.ssh/id_rsa -p 3922 root#<Private or Link local Ip address of SSVM>
I suggest you run the /usr/local/cloud/systemvm/ssvm-check.sh after doing ssh into the secondary storage system VM (assuming it is running) and has it's private, public and link local IP address. If that doesn't help you much, take a look at the secondary storage troubleshooting docs at Cloudstack.
I would further recommend, if anyone in future runs into similar issues, check if the SSVM is running and is in "Up" state in the System VMs section of Infrastructure tab and that you are able to open up a console session of it from the browser. If that is working go on to run the ssvm-check.sh script mentioned above which systematically checks each and every point of operation that SSVM executes. Even if console session cannot be opened up, you can still ssh using the link local IP address of SSVM which can be accessed by opening up details of SSVM and than execute the script. If it says, it cannot communicate with Management Server at port 8250, I recommend you check the iptables rules of management server and make sure all traffic is allowed at port 8250. A custom command to check the same is nc -v <mngmnt-server-ip> 8250. You can do a simple search and learn how to add port 8250 in your iptables rules if that is not opened. Next, you mentioned you used CentOS 6.8, so it probably uses older versions of nfs, so execute exportfs -a in your NFS server to make sure all the NFS shares are properly exported and there are no errors. I would recommend that you wait for the downloading status of CentOS 5.5 no GUI kvm template to be complete and its Ready status shown as 'Yes' before you start importing your own templates and ISOs to execute on VMs. Finally, if your ssvm-check.sh script shows everything is good and the download still does not start, you can run the command: service cloud restart and actually check if the service has gotten a PID using service cloud status as the older versions of system vm templates sometimes need us to manually start the cloud service using service cloud start even after the restart command. Restarting the cloud service in SSVM triggers the restart of downloading of all remaining templates and ISOs. Side note: the system VMs uses a Debian kernel if you want to do some more troubleshooting. Hope this helps.
I have followed this guide to install a jenkins slave on windows 8 as a service:
https://wiki.jenkins-ci.org/display/JENKINS/Installing+Jenkins+as+a+Windows+service#InstallingJenkinsasaWindowsservice-InstallSlaveasaWindowsservice%28require.NET2.0framework%29
I need to run a job that interact with the desktop (run an application that opens a browser etc.). So after I have installed the slave as a service (running jnlp downloaded from the master) I have changed the service "Log on" to "Allow to interact with display".
For some reason its only possible to enable this for the "Local System account" even though its recommended to run the service as a specified user, eg. jenkins.
But nothing happens when I execute the job, the browser is not opened. If I instead stop the service and just launch the slave through the jnlp file the job runs fine - the browser is opened.
Anybody had any luck interacting with the desktop when running a jenkins windows slave as a service?
Services run since Vista in Session 0 and the first user is now in Session 1. So you can't interact any longer. This is called Session 0 Isolation.
Microsoft explains this here and here. You have to use 2nd Program which uses IPC to communicate to the Service.
I had lots of issues running Jenkins in Windows using the service.
Instead I now disable the service and run it from CMD.
So open CMD.
cd C:\Program Files (x86)\Jenkins
java -Xrs -Xmx256m -Dhudson.lifecycle=hudson.lifecycle.WindowsServiceLifecycle -jar
jenkins.war --httpPort=9091
To resolve it, first create Windows auto-logon as I explain here:
https://serverfault.com/questions/269832/windows-server-2008-automatic-user-logon-on-power-on/606130#606130
Then create a startup batch for Jenkins agent (place it in Jenkins directory). This will launch agent console on desktop, and should allow Jenkins to interact with Windows GUI:
java -jar slave.jar -jnlpUrl http://{Your Jenkins Server}:8080/computer/{Your Jenkins Node}/slave-agent.jnlp
(slave.jar can be download from http://{Your Jenkins Server}:8080/jnlpJars/slave.jar)
EDIT :
If you're getting black screenshots (when using Selenium or Sikuli, for example), create a batch file that disconnects Remote Desktop, instead of closing the RDP session with the regular X button:
%windir%\system32\tscon.exe %SESSIONNAME% /dest:console
Consider running the Java slave server directly at startup and then using something to monitor and restart should the server go down (e.g., Kiwi Restarter).
Please check the services (# TestNode) make sure the "Interactive Services Detection" service is STARTED, by default the startup type is set to Manual, you may like to set it to automatic as well.
After service started, when you run your test in the Test Node, you will see something like the below:
Click on it and choose view the message
You will see the activities happen there. Hope this helps :D
Note: If login with other account and cannot view the Interative Services Detection prompt, restart the service again.
My Jenkins Service runs as user "jenkins" and all I did was to create Desktop folders in: C:\Windows\system32\config\systemprofile\desktop and if 64 bit Windows also in C:\Windows\SysWOW64\config\systemprofile\desktop - then it runs perfectly.
Make sure that Desktop folders are created as such:
%WINDOWS%/System32/config/systemprofile/Desktop
%WINDOWS%/SystemWOW64/config/systemprofile/Desktop
Presence of those can sometimes be mandatory while running some Java software as a Service.