I want visual studio code to suggest an autocompletion for an entire line if I start typing the first few characters of any line already in the file, regardless of the content of the existing line. So if this is the content of my file:
this is a line with whitespace
this,is,a,comma,separated,list
And I type this on a new line, I would get a pop-up like any other autocomplete suggestion and I could fill in either of the lines above. How can I do this (and if I can't, is there another editor that has this ability)?
The extension Line Completion does what you want.
You have to configure for which files (language identifiers) it should perform these suggestions. (To prevent to much calculation on large files where you don't use it. See the README page.
When I hit tab in visual studio code, the code gets indented with what seems to be "fake" spaces. If I hit tab on a new line without typing anything on the previously indented line, the spaces on the previous line seem to disappear. Is this fixable?
It sounds like the unnecssary (because there is no text on that previous line) is being trimmed automatically. To stop that disable the setting:
Editor: Trim Auto Whitespace
I think that'll result in what you want.
I am coding HTML & CSS in VS Code IDE. I have installed & enabled the prettier extension for better readability of the code & auto-indentation. but my content of tags is not going beyond that certain point on the screen & it is getting added to the next line whenever I save my code by Ctrl +S (example: see the last paragraph tag). How to get that content on the same line?
You shouldn't use Prettier if you don't need this behavior. That's what Prettier does: splits lines that are too long. See here https://prettier.io/docs/en/index.html
I'm seeking a command that when I highlight a paragraph of text in Visual Studio Code will let me remove all line breaks, and correspondingly a command that if I highlight a paragraph without line breaks will insert them at the end of the display width.
It wont be enough to just use Alt-Z because that just makes the display show the line wrapping but doesn't actually insert the line breaks.
For context: I'm using a VS Code latex plugin which is a compiled text editor format. Errors in this system trace back to line numbers so if you don't have line breaks you have to hunt down the error somewhere in a large paragraph. But of course this being a text document there you often have to edit paragraphs and end-of-lines become jagged and hard to read/update.
You can set this behavior searching for "Word Wrap" in the settings. Set to "on" to wrap the words.
Found a solution, maybe it will help someone in the future.: install "rewrap" extension. Select portion of text, and use Alt-q. Seems to work like Emacs' M-q command. (Thx Grant)
Is it possible to make VSCode keep indents on empty lines?
Could not find such a setting neither natively nor in "Beautify" extension.
Example of desired behavior:
UPDATE: eventually I've just switched to Prettier - and never had to think about code style again as it's just being formatted automatically for me.
Go to File > Preferences > Settings. On the right side, add the line:
,"editor.trimAutoWhitespace": false
It worked for me perfectly.
Bit of an old question, but I found that a combination of the settings:
"editor.trimAutoWhitespace": false,
"editor.renderWhitespace": "all"
...worked for me.
NOTE: (19/03/2021)
It appears that this issue, registered on GitHub, is still an open case.
As of: 2022-02-01
Here is the solution that worked for me even with VSCODE formatting(linting) on:
There are two native VSCODE settings that format your code automatically:
"editor.formatOnSave": true,
"editor.formatOnType": true,
These settings affect your text editor only if
"editor.defaultFormatter" is not null
Here are the problems
The "editor.trimAutoWhitespace" VSCODE setting solves the problem but only works on the "editor.formatOnType" autoformat, when you save the document this setting is ignored.
You may also want to trimAutoWhitespaces on all cases but the ones where you are leaving an indent on an empty row. (this was my case).
In my case, while coding, I test my code in the terminal chunck by chunck. The problem with, in my case, python is that the end of a for loops and a conditional is defined by indentation. In this case since the terminal run the code line by line, and not in chuncks, with the removal of the indentation, the terminal thinks that the for and if commands are finished before they actually are.
Here is the solution:
Never define an edit.defaultFormatter in your VSCODE settings define it per language.
How do you do that?
Change VSCODE "editor.defaultFormatter" to null as in:
"editor.defaultFormatter": null,
Change the language formatter to your prefered one. In my case:
python.formatting.provider": "black"
VSCODE gives you the possibility of choosing a formatting (linting) provider for any language. These providers' rules are way more detailed than the VSCode native rules. In VS code press CRTL+SHIFT+P and search for "preferences: Configure Language Specific Settings...". Then define your formatting provider for said language.
Every provider (in my case "black") provides the option of ignoring some sort of formatting rule. Set the ignore argument for this provider.
In my case I only ignore 2 rules and my setting is:
"python.formatting.blackArgs": [ "--ignore=E501,W293" ],
Rule E501 = Row with more than 80 character.
Rule W293 = Empty Row containing only WhiteSpaces.
Ignoring W293 allows the Auto Trim White Spaces to keep working for every kind of trailing White Spaces except for the case referred to in W293.
I had the same issue but after removing :
"editor.autoIndent": "none"
I was good to go.
Timestamp:
2021, using VS Code v1.56.2
Use Case:
You use editor.action.trimTrailingWhitespace. Later you wish to write new code in a function. You navigate to a blank line within the function, but discover this line isn't indented and is completely empty. In this scenario, you have four choices:
Hit Tab multiple times until your cursor is at the proper indentation.
Navigate up to a line with proper indentation, press End, then press Enter.
Click your mouse to the right of a properly indented line, then press Enter.
Press Ctrl + ] repeatedly to indent the empty line.[See Footnote 1]
This answer automates this workflow by inserting the indentation for you (when you navigate to an empty line surrounded by indented lines).
Background:
Spent 3 hours trying all of the solutions on this page (and many different extensions). Couldn't find anything else which worked.
Solution via Extension
implicit-indent Extension by jemc:
https://marketplace.visualstudio.com/items?itemName=jemc.vscode-implicit-indent
Automatically indents an empty line when navigated to (if its surrounding lines are indented).
Functionality
From experimenting, here's how implicit-indent seems to work:
Checks and matches either tab or space indentation automatically.
Determines spaces or tabs based on indentation of surrounding text, regardless of editor settings.[See Footnote 2]
Clicking on an empty line automatically indents to match surroundings.
If pressing the up ↑ or down ↓ arrow key navigates the caret (a.k.a. text cursor) to an empty line, implicit-indent will automatically indent the line and place the cursor to the right of the indentation (making it feel the same as if the line were already indented).
-> Before ↑ or ↓ is pressed, it doesn't matter what column the caret is on, this extension will trigger regardless.
Navigating to an empty line matches nested indentation.
Assume you have the following:
Where |n| represents a line
and c represents the caret / text cursor
and only line |2| is empty.
|1| indented line
|2| (empty line)
|3| c indented line
^ assume caret is on line |3|
(caret can be at any column)
Pressing the up ↑ arrow key results in the following:
|1| indented line
|2| c
|3| indented line
^ Line |2| (previously empty)
is automatically indented to
match nested indentation
of line |3|
and the caret is automatically moved
to the end of the inserted whitespace
(as if the line were already indented).
VS Code
As of 2021 May, the following GitHub issues are still unresolved:
https://github.com/microsoft/vscode/issues/49661
https://github.com/microsoft/vscode/issues/54210
https://github.com/OmniSharp/omnisharp-vscode/issues/1980
https://github.com/OmniSharp/omnisharp-vscode/issues/1680
Using implicit-indent is the only workaround I've discovered so far.
I'll amend this answer when automatic indentation is added to VS Code's native settings.
[Footnote 1]
As an alternative to this extension, you can use Tab or the following indent/unindent functionality built-in to VS Code to manually indent an empty line. Slightly out of scope, but it's a good hotkey to know about.
Default built-in hotkeys are:
Hotkey: CTRL + ]
Command: editor.action.indentLines
What it does:
Indent current line (if no selection)
or indent all selected or partially-selected lines.
Hotkey: CTRL + [
Command: editor.action.outdentLines
What it does:
"Outdent" (a.k.a "unindent" a.k.a dedent)
current line (if no selection)
or outdent all selected or partially-selected lines.
[Footnote 2]
Note: regardless of whether you use this extension or not, you can quickly replace your current document's indentation (to either leading tabs or leading spaces) by using the following VS Code commands:
editor.action.indentationToTabs
editor.action.indentationToSpaces
That is probably eslint (and/or beautify) doing that. Look at
"no-trailing-spaces": ["error", { "skipBlankLines": false }],
I have that in my eslintrc.json file and so I get errors on blank lines with spaces or tabs on them. Setting "skipBlankLines" to true might work for you.
Answer edited as for VSC version 1.56.2 and newer.
The command editor.action.insertLineAfter makes a new line and moves the cursor there preserving the indentation.
To bind that command to Enter key, go to your keyboard shortcuts (press ctrl + k ctrl + s) then press the page with the pivot arrow icon on the far right top.
add the following inside keybindings.json to look like so:
// Place your key bindings in this file to override the defaults
[
{
"key": "enter",
"command": "editor.action.insertLineAfter",
"when": "editorTextFocus && !editorReadonly"
},
]
It worked for my without re-opening of VSC
I was having this issue with writing Flutter code.
Only solution for me was to change my default formatter to Flutter.
UPDATE: I also needed to disable Dart: Enable SDK Formatter