Related
I take backup using
pg_dump db_production > postgres_db.dump
and then I copy it to localhost using scp.
Now when I import on my local db it gives an error
pg_restore: [archiver] input file appears to be a text format dump. Please use psql.
by using commad line
pg_restore -d db_development postgres_db.dump
From the pg_dump documentation:
Examples
To dump a database called mydb into a SQL-script file:
$ pg_dump mydb > db.sql
To reload such a script into a (freshly created) database named newdb:
$ psql -d newdb -f db.sql
To dump a database into a custom-format archive file:
$ pg_dump -Fc mydb > db.dump
To dump a database into a directory-format archive:
$ pg_dump -Fd mydb -f dumpdir
To reload an archive file into a (freshly created) database named newdb:
$ pg_restore -d newdb db.dump
From the pg_restore documentation:
Examples
Assume we have dumped a database called mydb into a custom-format dump file:
$ pg_dump -Fc mydb > db.dump
To drop the database and recreate it from the dump:
$ dropdb mydb
$ pg_restore -C -d postgres db.dump
The answer above didn't work for me, this worked:
psql db_development < postgres_db.dump
In order to create a backup using pg_dump that is compatible with pg_restore you must use the --format=custom / -Fc when creating your dump.
From the docs:
Output a custom-format archive suitable for input into pg_restore.
So your pg_dump command might look like:
pg_dump --file /tmp/db.dump --format=custom --host localhost --dbname my-source-database --username my-username --password
And your pg_restore command:
pg_restore --verbose --clean --no-acl --no-owner --host localhost --dbname my-destination-database /tmp/db.dump
For me when i try to restore from remote host i used
psql -U username -p 5432 -h 10.10.10.1 -d database < db.dump
worked fine. And if not remote just following command worked.
psql -d database < db.dump
For me, It's working like this one.
C:\Program Files\PostgreSQL\12\bin> psql -U postgres -p 5432 -d dummy -f C:\Users\Downloads\d2cm_test.sql
If you restore .SQL file.
Create a new database in pgAdmin.
Go to the terminal and navigate the folder/directory where your .sql file is located. And then write the following command in terminal.
Syntax:
supername user postgres psql newDatabasename < inputfile.sql
Examaple:
sudo -u postgres psql newDb < restoreDb.sql
I've got same error when tried to backup db with DBeaver. If anyone uses DBeaver interface instead of command line on Windows, make sure your selected format as tar during backup and restore settings.
If you have a full DB dump:
PGPASSWORD="your_pass" psql -h "your_host" -U "your_user" -d "your_database" -f backup.sql
If you have schemas kept separately, however, that won't work. Then you'll need to disable triggers for data insertion, akin to pg_restore --disable-triggers. You can then use this:
cat database_data_only.gzip | gunzip | PGPASSWORD="your_pass" psql -h "your_host" -U root "your_database" -c 'SET session_replication_role = replica;' -f /dev/stdin
On a side note, it is a very unfortunate downside of postgres, I think. The default way of creating a dump in pg_dump is incompatible with pg_restore. With some additional keys, however, it is. WTF?
if you use pg_dump with -Fp to backup in plain text format, use following command:
cat db.txt | psql dbname
to copy all data to your database with name dbname
psql -U <username> -d <database-name> -h <host-name> -f <backup.sql>
Providing a simple one line answer which worked for me and will work for you too for most cases
psql -U username -d database_name < dump_file.sql
If above gives role related errors then replace username with postgres.
psql -U postgres -d database_name < dump_file.sql
Probably when you create a backup you want to restore it in another network or create a remote restoration.
We need to create a backup file using the --format=custom [-Fc] to restore it using pg_restore. We can use a connection string postgresql://<user>:<pass>#localhost:5432/<dbname> and replace <user>, <pass>, and <dbname> with your information.
pg_dump -v -Fc \
postgresql://<user>:<pass>#localhost:5432/<dbname> \
> db-20211122-163508.sql
To restore we will call it using --clean [-c] and --create [-C] to drop the database before restoring. Replace <user>, <host>, <port>, and <dbname> with your information.
pg_restore -vcC \
-U <user> \
-h <host> \
-p <port> \
-d <dbname> \
< db-20211122-163508.sql
If you backup with this way, I think this will be more easy to import database.
pg_dump -h (remote db address) -a --column-inserts -U postgres (database name) > (file name).sql
For import,
psql
-f (file name).sql
--host (remote db address)
--port 5432
--username postgres
--password (your password)
--dbname (database you want to import)
I've been struggling with this as well. This is the combination of dump & restore commands that worked for me:
pg_dump -Ft -C -h database_host -U username database > DATA.dump
To restore
pg_restore -x --no-owner -d database DATA.dump
Remove the -x flag if you want to keep the same access privileges (ACLs) in your DB. You must have the same roles and users in the database for this.
https://www.postgresql.org/docs/15/app-pgdump.html
https://www.postgresql.org/docs/15/app-pgrestore.html
here is the solution,
pg_restore -U username -p 5432 -h 10.10.10.1 -d database_name < dump_file
I have made a backup of my specific tables that I want to restore into a new database using:
call pg_dump -Fc -h server -d database -U user -p password -v -f dump.sql -t public.table1 -t public.table2
And I have no problems.
I then want to restore the dump by creating a new database with pg_restore using:
call pg_restore --clean --create -d temp -h server -p password -U user dump.sql
This gives me a "database temp does not exist" error. This should have created the database and restored it as far as I understand.
I However then create the "temp" database manually and run:
call pg_restore --clean --create -d temp -h server -p password -U user dump.sql
This follows through, but does not create the tables and gives me an error "relation table1" and "relation table2" does not exist and only creates the corresponding id_sequences for the two tables.
What I actually want is to not have to manually create the new database and that all tables in the backup is restored into a brand new database via pg_restore using:
call pg_restore --clean --create -d temp -h server -p password -U user dump.sql
as I understand it.
In order to create the database temp, pg_restore needs to be connected to a different database first.
So it won't do to use -d temp; you must specify an existing database, typically postgres.
pg_restore will connect to that database, issue CREATE DATABASE temp, connect to temp and proceed to restore the data.
Locally, I use pgadmin3. On the remote server, however, I have no such luxury.
I've already created the backup of the database and copied it over, but is there a way to restore a backup from the command line? I only see things related to GUI or to pg_dumps.
There are two tools to look at, depending on how you created the dump file.
Your first source of reference should be the man page pg_dump as that is what creates the dump itself. It says:
Dumps can be output in script or
archive file formats. Script dumps are
plain-text files containing the SQL
commands required to reconstruct
the database to the state it was
in at the time it was saved. To
restore from such a script, feed it to
psql(1). Script files can be used
to reconstruct the database even
on other machines and other
architectures; with some modifications
even on other SQL database products.
The alternative archive file formats
must be used with pg_restore(1) to
rebuild the database. They allow
pg_restore to be selective about what
is restored, or even to reorder the
items prior to being restored. The
archive file formats are designed to
be portable across architectures.
So depends on the way it was dumped out. If using Linux/Unix, you can probably figure it out using the excellent file(1) command - if it mentions ASCII text and/or SQL, it should be restored with psql otherwise you should probably use pg_restore.
Restoring is pretty easy:
psql -U username -d dbname < filename.sql
-- For Postgres versions 9.0 or earlier
psql -U username -d dbname -1 -f filename.sql
or
pg_restore -U username -d dbname -1 filename.dump
Check out their respective manpages - there's quite a few options that affect how the restore works. You may have to clean out your "live" databases or recreate them from template0 (as pointed out in a comment) before restoring, depending on how the dumps were generated.
create backup
pg_dump -h localhost -p 5432 -U postgres -F c -b -v -f
"/usr/local/backup/10.70.0.61.backup" old_db
-F c is custom format (compressed, and able to do in parallel with -j N) -b is including blobs, -v is verbose, -f is the backup file name.
restore from backup
pg_restore -h localhost -p 5432 -U postgres -d old_db -v
"/usr/local/backup/10.70.0.61.backup"
important to set -h localhost - option
You might need to be logged in as postgres in order to have full privileges on databases.
su - postgres
psql -l # will list all databases on Postgres cluster
pg_dump/pg_restore
pg_dump -U username -f backup.dump database_name -Fc
switch -F specify format of backup file:
c will use custom PostgreSQL format which is compressed and results in smallest backup file size
d for directory where each file is one table
t for TAR archive (bigger than custom format)
-h/--host Specifies the host name of the machine on which the server is running
-W/--password Force pg_dump to prompt for a password before connecting to a database
restore backup:
pg_restore -d database_name -U username -C backup.dump
Parameter -C should create database before importing data. If it doesn't work you can always create database eg. with command (as user postgres or other account that has rights to create databases) createdb db_name -O owner
pg_dump/psql
In case that you didn't specify the argument -F default plain text SQL format was used (or with -F p). Then you can't use pg_restore. You can import data with psql.
backup:
pg_dump -U username -f backup.sql database_name
restore:
psql -d database_name -f backup.sql
POSTGRESQL 9.1.12
DUMP:
pg_dump -U user db_name > archive_name.sql
put the user password and press enter.
RESTORE:
psql -U user db_name < /directory/archive.sql
put the user password and press enter.
Below is my version of pg_dump which I use to restore the database:
pg_restore -h localhost -p 5432 -U postgres -d my_new_database my_old_database.backup
or use psql:
psql -h localhost -U postgres -p 5432 my_new_database < my_old_database.backup
where -h host, -p port, -u login username, -d name of database
Backup and restore with GZIP
For larger size database this is very good
backup
pg_dump -U user -d mydb | gzip > mydb.pgsql.gz
restore
gunzip -c mydb.pgsql.gz | psql dbname -U user
https://www.postgresql.org/docs/14/backup-dump.html
This worked for me:
pg_restore --verbose --clean --no-acl --no-owner --host=localhost --dbname=db_name --username=username latest.dump
Backup: $ pg_dump -U {user-name} {source_db} -f {dumpfilename.sql}
Restore: $ psql -U {user-name} -d {desintation_db} -f {dumpfilename.sql}
try this:
psql -U <username> -d <dbname> -f <filename>.sql
Restore DB psql from .sql file
Backup & Restore
This is the combo I'm using to backup, drop, create and restore my database (on macOS and Linux):
sudo -u postgres pg_dump -Fc mydb > ./mydb.sql
sudo -u postgres dropdb mydb
sudo -u postgres createdb -O db_user mydb
sudo -u postgres pg_restore -d mydb < ./mydb.sql
Misc
-Fc will compress the database (Format custom)
List PostgreSQL users: sudo -u postgres psql -c "\du+"
You may want to add hostname and date to ./mydb.sql, then change it by:
./`hostname`_mydb_`date +"%Y%m%d_%H%M"`.sql
If you create a backup using pg_dump you can easily restore it in the following way:
Open command line window
Go to Postgres bin folder. For example: cd "C:\ProgramFiles\PostgreSQL\9.5\bin"
Enter the command to restore your database. For example: psql.exe -U postgres -d YourDatabase -f D:\Backup\.sql
Type password for your postgres user
Check the restore process
I didnt see here mentions about dump file extension (*.dump).
This solution worked for me:
I got a dump file and needed to recover it.
First I tried to do this with pg_restore and got:
pg_restore: error: input file appears to be a text format dump. Please use psql.
I did it with psql and worked well:
psql -U myUser -d myDataBase < path_to_the_file/file.dump
1. Open the Terminal.
2. Backup your database with following command
your postgres bin -> /opt/PostgreSQL/9.1/bin/
your source database server -> 192.168.1.111
your backup file location and name -> /home/dinesh/db/mydb.backup
your source db name -> mydatabase
/opt/PostgreSQL/9.1/bin/pg_dump --host '192.168.1.111' --port 5432 --username "postgres" --no-password --format custom --blobs --file "/home/dinesh/db/mydb.backup" "mydatabase"
3. Restore mydb.backup file into destination.
your destination server -> localhost
your destination database name -> mydatabase
Create database for restore the backup.
/opt/PostgreSQL/9.1/bin/psql -h 'localhost' -p 5432 -U postgres -c "CREATE DATABASE mydatabase"
Restore the backup.
/opt/PostgreSQL/9.1/bin/pg_restore --host 'localhost' --port 5432 --username "postgres" --dbname "mydatabase" --no-password --clean "/home/dinesh/db/mydb.backup"
1) Open psql terminal.
2) Unzip/ untar the dump file.
3) Create an empty database.
4) use the following command to restore the .dump file
<database_name>-# \i <path_to_.dump_file>
To restore a dump file
psql -d [Dbname] -U [UserName] -p 5432 < [FileLocation]
To restore a .SQL file
pg_restore -U [Username] -d [Dbname] -1 [FileLocation]
If you get user authentication errors, go to the file pg_hba.conf which is in PSQL/data folder in your program files, and change the "METHOD" to "Trust".
Restart you psql serive in windows services(Win + R --> services.msc).
try:
pg_restore -h localhost -p 5432 -U <username> -d <dbname> -1 <filename>
Restoring a postgres backup file depends on how did you take the backup in the first place.
If you used pg_dump with -F c or -F d you need to use pg_restore otherwise you can just use
psql -h localhost -p 5432 -U postgres < backupfile
9 ways to backup and restore postgres databases
As below link said, you can use psql command for restoring the dump file:
https://www.postgresql.org/docs/8.1/static/backup.html#BACKUP-DUMP-RESTORE
psql dbname < infile
if you need to set username just add the username after the command like:
psql dbname < infile username
Sorry for the necropost, but these solutions did not work for me. I'm on postgres 10. On Linux:
I had to change directory to my pg_hba.conf.
I had to edit the file to change method from peer to md5 as stated here
Restart the service: service postgresql-10 restart
Change directory to where my backup.sql was located and execute:
psql postgres -d database_name -1 -f backup.sql
-database_name is the name of my database
-backup.sql is the name of my .sql backup file.
Try to see if the following commands can help you:
sudo su - yourdbuser
psql
\i yourbackupfile
If you have a backup SQL file then you can easily Restore it.
Just follow the instructions, given in the below
1. At first, create a database using pgAdmin or whatever you want (for example my_db is our created db name)
2. Now Open command line window
3. Go to Postgres bin folder. For example: cd "C:\ProgramFiles\PostgreSQL\pg10\bin"
4. Enter the following command to restore your database: psql.exe -U postgres -d my_db -f D:\Backup\backup_file_name.sql
Type password for your postgres user if needed and let Postgres to do its work. Then you can check the restore process.
The shortest way with no password prompt
psql "postgresql://<db_user>:<db_pass>#<ip>:<port>/<db_name>" < "backup.sql"
If you are using Windows OS
psql.exe "postgresql://<db_user>:<db_pass>#<ip>:<port>/<db_name>" < "backup.sql"
I was having authentication problems running pg_dump, so I moved my dump file
mv database_dump /tmp
into the temp directory and then ran
su -u postgres
cd /tmp
pg_restore database_dump
If you have a large database dump, you may just want to create another directory where your current user and the postgres user can access and putting the database dump file into that.
Backup==>
Option1: To take backup along with password in cmd
1.PGPASSWORD="mypassword" pg_dump -U postgres -h localhost --inserts mydb>mydb.sql
Option2: To take backup without password in cmd
2. pg_dump -U postgres -h localhost --inserts mydb>mydb.sql
Option3: To take backup as gzip(if database is huge)
3. pg_dump -U postgres -h localhost mydb --inserts | gzip > mydb.gz
Restore:
1. psql -h localhost -d mydb -U postgres -p 5432 < mydb.sql
This solution only works for Windows.
First, ensure you have already added the postgres bin folder to the "Path" environment variable (in my case this folder is C:\Program Files\PostgreSQL\12\bin).
Then, open the Windows command interpreter (cmd), go to the folder where you have the .sql file and execute this command:
pg_restore -U userName -d database-1 backupfile.sql
For example:
pg_restore -U sam -d SamDataBase -1 SamDataBaseBackup.sql
(It can ask you for the password of the user so ensure to type it correctly and then click enter)
Pura vida!
If you have created a new database named mydb, To restore a .sql dump to that database with psql,
psql --file=dump.sql --username=postgres --host=localhost --port=5432 mydb
the password will be prompted by psql
The connection options are
-h, --host=HOSTNAME database server host or socket directory (default: "/var/run/postgresql")
-p, --port=PORT database server port (default: "5432")
-U, --username=USERNAME database user name (default: "xyz")
-w, --no-password never prompt for password
-W, --password force password prompt (should happen automatically)
If you are using docker, this answer may be helpful.
Start the container
docker start <postgres_container_id>
Access bash inside container
docker exec -it <postgres_container_id> bash
Copy the .tar backup file to docker container (In another window)
docker cp postgres_dump.tar <postgres_container_id>:/
Restore the backup
pg_restore -c -U <postgres-user> -d <password> -v "postgres_dump.tar" -W
Enter password
Save and restore the exact same state with compressed dump
Other answers gave all the key bits separately, but hopefully this will provide be the "just works save and restore to exact state" command pair.
Dump to file mydb.psql:
PGPASSWORD=mypassword pg_dump -U my_username -h localhost mydb -Fc -f mydb.psql
Restore:
PGPASSWORD=mypassword pg_restore -U my_username -h localhost \
--clean -d mydb -v mydb.psql
Some of the flags:
-Fc: Format Compressed, as opposed to plaintext.
file tmp.psql says:
tmp.psql: PostgreSQL custom database dump - v1.14-0
--clean: destroy the target DB before restoring it, thus returning to the exact same pristine state.
Any data created after the dump will be lost.
PGPASSWORD, -U and -h can of course be modified depending on your login method, e.g. without PGPASSWORD you're prompted for a password, and none of those are needed if you set up peer auth locally.
Tested on Ubuntu 22.04, PostgreSQL 14.5.
If you want to backup your data or restore data from a backup, you can run the following commands:
To create backup of your data, go to your postgres \bin\ directory like C:\programfiles\postgres\10\bin\ and then type the following command:
pg_dump -FC -U ngb -d ngb -p 5432 >C:\BACK_UP\ngb.090718_after_readUpload.backup
To restore data from a backup, go to your postgres \bin\ directory like C:\programfiles\postgres\10\bin\ and then type below command:
C:\programFiles\postgres\10\bin> pg_restore -Fc -U ngb -d ngb -p 5432 <C:\ngb.130918.backup
Please make sure that the backup file exists.
Follow these 3 steps :
start postgres server - sudo systemctl start postgresql
enable same - sudo systemctl enable postgresql
restore command - pg_restore -h localhost -p 5432 -U postgres -d old_db
assuming that the dump is there in the same directory
Links :
https://www.postgresqltutorial.com/postgresql-restore-database
https://askubuntu.com/questions/50621/cannot-connect-to-postgresql-on-port-5432
I use the postgres today
and got a problem
I dump the database that way
pg_dump zeus_development -U test > zeus_development.dump.out
what if I wnat to restore to another database zeus_production
How could I do?
Simple, first create your database using template0 as your template database:
createdb -U test -T template0 zeus_production
Then, restore your dump on this database:
psql -U test zeus_production -f /path/to/zeus_development.dump.out
When restoring, always use template0 explicit, as it is always an empty and unmodifiable database. If you don't use an explicit template, PostgreSQL will assume template1, and if it has some objects, like a table or function that your dumped database already has, you will get some errors while restoring.
Nonetheless, even if you were restoring on a database with the same name (zeus_development) you should create (or recreate) it the same way. Unless you used -C option while dumping (or -C of pg_restore if using a binary dump), which I don't recommend, because will give you less flexibility (like restoring on a different database name).
The PostgresSQL documentation has influenced me to use the custom format. I've been using it for years and it seems to have various advantages but your mileage may vary. That said, here is what worked for me:
pg_restore --no-owner --dbname postgres --create ~/Desktop/pg_dump
psql --dbname postgres -c 'ALTER DATABASE foodog_production RENAME TO foodog_development'
There was no foodog_development nor foodog_production databases existing before the sequence.
This restores the database from the dump (~/Desktop/pg_dump) which will create it with the name it was dumped as. The rename names the DB to whatever you want.
The --no-owner may not be needed if your user name is the same on both machines. In my case, the dump was done as user1 and the restore done as user2. The new objects need to be owned by user2 and --no-owner achieves this.
Isn't it easier to simply do the following?
createdb -U test -T zeus_development zeus_production
This has an answer on dba.stackexchange, which I reproduce here:
Let's define a few variables to make the rest easier to copy/paste
old_db=my_old_database
new_db=new_database_name
db_dump_file=backups/my_old_database.dump
user=postgres
The following assumes that your backup was created with the "custom" format like this:
pg_dump -U $user -F custom $old_db > "$db_dump_file"
To restore $db_dump_file to a new database name $new_db :
dropdb -U $user --if-exists $new_db
createdb -U $user -T template0 $new_db
pg_restore -U $user -d $new_db "$db_dump_file"
Here's a hacky way of doing it, that only works if you can afford the space and time to use regular .sql format, and if you can safely sed out your database name and user.
$ pg_dump -U my_production_user -h localhost my_production > my_prod_dump.sql
$ sed -i 's/my_production_user/my_staging_user/g' my_prod_dump.sql
$ sed -i 's/my_production/my_staging/g' my_prod_dump.sql
$ mv my_prod_dump.sql my_staging_dump.sql
$ sudo su postgres -c psql
psql> drop database my_staging;
psql> create database my_staging owner my_staging_user;
psql> \c my_staging;
psql> \i my_staging_dump.sql
If your dump does not include the name, the restore will use the DB defined in DESTINATION. Both SOURCE and DESTINATION are Connection URLs.
Dump without --create
pg_dump \
--clean --if-exists \
--file ${dump_path} \
--format=directory \
--jobs 5 \
--no-acl \
--no-owner \
${SOURCE}
Restore without --create
pg_restore \
--clean --if-exists \
--dbname=${DESTINATION} \
--format=directory \
--jobs=5 \
--no-acl \
--no-owner \
$dump_path
Locally, I use pgadmin3. On the remote server, however, I have no such luxury.
I've already created the backup of the database and copied it over, but is there a way to restore a backup from the command line? I only see things related to GUI or to pg_dumps.
There are two tools to look at, depending on how you created the dump file.
Your first source of reference should be the man page pg_dump as that is what creates the dump itself. It says:
Dumps can be output in script or
archive file formats. Script dumps are
plain-text files containing the SQL
commands required to reconstruct
the database to the state it was
in at the time it was saved. To
restore from such a script, feed it to
psql(1). Script files can be used
to reconstruct the database even
on other machines and other
architectures; with some modifications
even on other SQL database products.
The alternative archive file formats
must be used with pg_restore(1) to
rebuild the database. They allow
pg_restore to be selective about what
is restored, or even to reorder the
items prior to being restored. The
archive file formats are designed to
be portable across architectures.
So depends on the way it was dumped out. If using Linux/Unix, you can probably figure it out using the excellent file(1) command - if it mentions ASCII text and/or SQL, it should be restored with psql otherwise you should probably use pg_restore.
Restoring is pretty easy:
psql -U username -d dbname < filename.sql
-- For Postgres versions 9.0 or earlier
psql -U username -d dbname -1 -f filename.sql
or
pg_restore -U username -d dbname -1 filename.dump
Check out their respective manpages - there's quite a few options that affect how the restore works. You may have to clean out your "live" databases or recreate them from template0 (as pointed out in a comment) before restoring, depending on how the dumps were generated.
create backup
pg_dump -h localhost -p 5432 -U postgres -F c -b -v -f
"/usr/local/backup/10.70.0.61.backup" old_db
-F c is custom format (compressed, and able to do in parallel with -j N) -b is including blobs, -v is verbose, -f is the backup file name.
restore from backup
pg_restore -h localhost -p 5432 -U postgres -d old_db -v
"/usr/local/backup/10.70.0.61.backup"
important to set -h localhost - option
You might need to be logged in as postgres in order to have full privileges on databases.
su - postgres
psql -l # will list all databases on Postgres cluster
pg_dump/pg_restore
pg_dump -U username -f backup.dump database_name -Fc
switch -F specify format of backup file:
c will use custom PostgreSQL format which is compressed and results in smallest backup file size
d for directory where each file is one table
t for TAR archive (bigger than custom format)
-h/--host Specifies the host name of the machine on which the server is running
-W/--password Force pg_dump to prompt for a password before connecting to a database
restore backup:
pg_restore -d database_name -U username -C backup.dump
Parameter -C should create database before importing data. If it doesn't work you can always create database eg. with command (as user postgres or other account that has rights to create databases) createdb db_name -O owner
pg_dump/psql
In case that you didn't specify the argument -F default plain text SQL format was used (or with -F p). Then you can't use pg_restore. You can import data with psql.
backup:
pg_dump -U username -f backup.sql database_name
restore:
psql -d database_name -f backup.sql
POSTGRESQL 9.1.12
DUMP:
pg_dump -U user db_name > archive_name.sql
put the user password and press enter.
RESTORE:
psql -U user db_name < /directory/archive.sql
put the user password and press enter.
Below is my version of pg_dump which I use to restore the database:
pg_restore -h localhost -p 5432 -U postgres -d my_new_database my_old_database.backup
or use psql:
psql -h localhost -U postgres -p 5432 my_new_database < my_old_database.backup
where -h host, -p port, -u login username, -d name of database
Backup and restore with GZIP
For larger size database this is very good
backup
pg_dump -U user -d mydb | gzip > mydb.pgsql.gz
restore
gunzip -c mydb.pgsql.gz | psql dbname -U user
https://www.postgresql.org/docs/14/backup-dump.html
This worked for me:
pg_restore --verbose --clean --no-acl --no-owner --host=localhost --dbname=db_name --username=username latest.dump
Backup: $ pg_dump -U {user-name} {source_db} -f {dumpfilename.sql}
Restore: $ psql -U {user-name} -d {desintation_db} -f {dumpfilename.sql}
try this:
psql -U <username> -d <dbname> -f <filename>.sql
Restore DB psql from .sql file
Backup & Restore
This is the combo I'm using to backup, drop, create and restore my database (on macOS and Linux):
sudo -u postgres pg_dump -Fc mydb > ./mydb.sql
sudo -u postgres dropdb mydb
sudo -u postgres createdb -O db_user mydb
sudo -u postgres pg_restore -d mydb < ./mydb.sql
Misc
-Fc will compress the database (Format custom)
List PostgreSQL users: sudo -u postgres psql -c "\du+"
You may want to add hostname and date to ./mydb.sql, then change it by:
./`hostname`_mydb_`date +"%Y%m%d_%H%M"`.sql
If you create a backup using pg_dump you can easily restore it in the following way:
Open command line window
Go to Postgres bin folder. For example: cd "C:\ProgramFiles\PostgreSQL\9.5\bin"
Enter the command to restore your database. For example: psql.exe -U postgres -d YourDatabase -f D:\Backup\.sql
Type password for your postgres user
Check the restore process
I didnt see here mentions about dump file extension (*.dump).
This solution worked for me:
I got a dump file and needed to recover it.
First I tried to do this with pg_restore and got:
pg_restore: error: input file appears to be a text format dump. Please use psql.
I did it with psql and worked well:
psql -U myUser -d myDataBase < path_to_the_file/file.dump
1. Open the Terminal.
2. Backup your database with following command
your postgres bin -> /opt/PostgreSQL/9.1/bin/
your source database server -> 192.168.1.111
your backup file location and name -> /home/dinesh/db/mydb.backup
your source db name -> mydatabase
/opt/PostgreSQL/9.1/bin/pg_dump --host '192.168.1.111' --port 5432 --username "postgres" --no-password --format custom --blobs --file "/home/dinesh/db/mydb.backup" "mydatabase"
3. Restore mydb.backup file into destination.
your destination server -> localhost
your destination database name -> mydatabase
Create database for restore the backup.
/opt/PostgreSQL/9.1/bin/psql -h 'localhost' -p 5432 -U postgres -c "CREATE DATABASE mydatabase"
Restore the backup.
/opt/PostgreSQL/9.1/bin/pg_restore --host 'localhost' --port 5432 --username "postgres" --dbname "mydatabase" --no-password --clean "/home/dinesh/db/mydb.backup"
1) Open psql terminal.
2) Unzip/ untar the dump file.
3) Create an empty database.
4) use the following command to restore the .dump file
<database_name>-# \i <path_to_.dump_file>
To restore a dump file
psql -d [Dbname] -U [UserName] -p 5432 < [FileLocation]
To restore a .SQL file
pg_restore -U [Username] -d [Dbname] -1 [FileLocation]
If you get user authentication errors, go to the file pg_hba.conf which is in PSQL/data folder in your program files, and change the "METHOD" to "Trust".
Restart you psql serive in windows services(Win + R --> services.msc).
try:
pg_restore -h localhost -p 5432 -U <username> -d <dbname> -1 <filename>
Restoring a postgres backup file depends on how did you take the backup in the first place.
If you used pg_dump with -F c or -F d you need to use pg_restore otherwise you can just use
psql -h localhost -p 5432 -U postgres < backupfile
9 ways to backup and restore postgres databases
As below link said, you can use psql command for restoring the dump file:
https://www.postgresql.org/docs/8.1/static/backup.html#BACKUP-DUMP-RESTORE
psql dbname < infile
if you need to set username just add the username after the command like:
psql dbname < infile username
Sorry for the necropost, but these solutions did not work for me. I'm on postgres 10. On Linux:
I had to change directory to my pg_hba.conf.
I had to edit the file to change method from peer to md5 as stated here
Restart the service: service postgresql-10 restart
Change directory to where my backup.sql was located and execute:
psql postgres -d database_name -1 -f backup.sql
-database_name is the name of my database
-backup.sql is the name of my .sql backup file.
Try to see if the following commands can help you:
sudo su - yourdbuser
psql
\i yourbackupfile
If you have a backup SQL file then you can easily Restore it.
Just follow the instructions, given in the below
1. At first, create a database using pgAdmin or whatever you want (for example my_db is our created db name)
2. Now Open command line window
3. Go to Postgres bin folder. For example: cd "C:\ProgramFiles\PostgreSQL\pg10\bin"
4. Enter the following command to restore your database: psql.exe -U postgres -d my_db -f D:\Backup\backup_file_name.sql
Type password for your postgres user if needed and let Postgres to do its work. Then you can check the restore process.
The shortest way with no password prompt
psql "postgresql://<db_user>:<db_pass>#<ip>:<port>/<db_name>" < "backup.sql"
If you are using Windows OS
psql.exe "postgresql://<db_user>:<db_pass>#<ip>:<port>/<db_name>" < "backup.sql"
I was having authentication problems running pg_dump, so I moved my dump file
mv database_dump /tmp
into the temp directory and then ran
su -u postgres
cd /tmp
pg_restore database_dump
If you have a large database dump, you may just want to create another directory where your current user and the postgres user can access and putting the database dump file into that.
Backup==>
Option1: To take backup along with password in cmd
1.PGPASSWORD="mypassword" pg_dump -U postgres -h localhost --inserts mydb>mydb.sql
Option2: To take backup without password in cmd
2. pg_dump -U postgres -h localhost --inserts mydb>mydb.sql
Option3: To take backup as gzip(if database is huge)
3. pg_dump -U postgres -h localhost mydb --inserts | gzip > mydb.gz
Restore:
1. psql -h localhost -d mydb -U postgres -p 5432 < mydb.sql
This solution only works for Windows.
First, ensure you have already added the postgres bin folder to the "Path" environment variable (in my case this folder is C:\Program Files\PostgreSQL\12\bin).
Then, open the Windows command interpreter (cmd), go to the folder where you have the .sql file and execute this command:
pg_restore -U userName -d database-1 backupfile.sql
For example:
pg_restore -U sam -d SamDataBase -1 SamDataBaseBackup.sql
(It can ask you for the password of the user so ensure to type it correctly and then click enter)
Pura vida!
If you have created a new database named mydb, To restore a .sql dump to that database with psql,
psql --file=dump.sql --username=postgres --host=localhost --port=5432 mydb
the password will be prompted by psql
The connection options are
-h, --host=HOSTNAME database server host or socket directory (default: "/var/run/postgresql")
-p, --port=PORT database server port (default: "5432")
-U, --username=USERNAME database user name (default: "xyz")
-w, --no-password never prompt for password
-W, --password force password prompt (should happen automatically)
If you are using docker, this answer may be helpful.
Start the container
docker start <postgres_container_id>
Access bash inside container
docker exec -it <postgres_container_id> bash
Copy the .tar backup file to docker container (In another window)
docker cp postgres_dump.tar <postgres_container_id>:/
Restore the backup
pg_restore -c -U <postgres-user> -d <password> -v "postgres_dump.tar" -W
Enter password
Save and restore the exact same state with compressed dump
Other answers gave all the key bits separately, but hopefully this will provide be the "just works save and restore to exact state" command pair.
Dump to file mydb.psql:
PGPASSWORD=mypassword pg_dump -U my_username -h localhost mydb -Fc -f mydb.psql
Restore:
PGPASSWORD=mypassword pg_restore -U my_username -h localhost \
--clean -d mydb -v mydb.psql
Some of the flags:
-Fc: Format Compressed, as opposed to plaintext.
file tmp.psql says:
tmp.psql: PostgreSQL custom database dump - v1.14-0
--clean: destroy the target DB before restoring it, thus returning to the exact same pristine state.
Any data created after the dump will be lost.
PGPASSWORD, -U and -h can of course be modified depending on your login method, e.g. without PGPASSWORD you're prompted for a password, and none of those are needed if you set up peer auth locally.
Tested on Ubuntu 22.04, PostgreSQL 14.5.
If you want to backup your data or restore data from a backup, you can run the following commands:
To create backup of your data, go to your postgres \bin\ directory like C:\programfiles\postgres\10\bin\ and then type the following command:
pg_dump -FC -U ngb -d ngb -p 5432 >C:\BACK_UP\ngb.090718_after_readUpload.backup
To restore data from a backup, go to your postgres \bin\ directory like C:\programfiles\postgres\10\bin\ and then type below command:
C:\programFiles\postgres\10\bin> pg_restore -Fc -U ngb -d ngb -p 5432 <C:\ngb.130918.backup
Please make sure that the backup file exists.
Follow these 3 steps :
start postgres server - sudo systemctl start postgresql
enable same - sudo systemctl enable postgresql
restore command - pg_restore -h localhost -p 5432 -U postgres -d old_db
assuming that the dump is there in the same directory
Links :
https://www.postgresqltutorial.com/postgresql-restore-database
https://askubuntu.com/questions/50621/cannot-connect-to-postgresql-on-port-5432