I'm trying to configure Snort on an OpenWrt mini router by running
snort -c /etc/snort/snort.conf -l /tmp/log/snort/ --daq-dir /usr/lib/daq/ -i br-lan
and I have this problem:
ERROR: spp_session.c(2567) Could not initialize protocol session memory pool. Fatal Error, Quitting..
Does anyone know how to fix this issue?
Maybe too old, but probably one of your dependencies is missing.
apt-get install snort
apt-get install libdnet && apt-get install build-essential &&apt-get install bison flex && apt-get install libpcap-dev && apt-get install libpcre3-dev && apt-get install libnet1-dev && apt-get install zlib1g-dev && apt-get install libnetfilter-queue-dev # daq: nfq && apt-get install libmnl-dev && apt-get install libnfnetlink-dev && apt-get install libnetfilter_queue-dev
See: https://www.youtube.com/watch?v=enSll_9Bjag
Check if you have enough memory on your machine. For me 1GB wasn't enough but 2GB is all right
Related
I am trying to install snapd but giving this error.
Operating System - Red Hat Enterprise Linux release 8.6 (Ootpa)
Error:
Problem: package snapd-2.57.6-2.el8.x86_64 requires snapd-selinux = 2.57.6-2.el8, but none of the providers can be installed
- conflicting requests
- nothing provides selinux-policy >= 3.14.3-108.el8 needed by snapd-selinux-2.57.6-2.el8.noarch
- nothing provides selinux-policy-base >= 3.14.3-108.el8 needed by snapd-selinux-2.57.6-2.el8.noarch
(try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages)
I have the same problem. There's a long discussion about this here: https://forum.snapcraft.io/t/trouble-installing-snapd-on-rhel-8/13140/2. It looks like the only way to do it, if you can install all the necessary build tools, is to build from sources, as one of the posts there suggests.(I couldn't do it on my system because it's having subscription management issues.)
I also tried using CR repository, as suggested in the instructions for CentOS here: https://snapcraft.io/docs/installing-snap-on-centos, but that didn't work for me, either (I guess it's really just for CentOS and not RHEL).
UPDATE:
I finally found a solution (where there's a will...)! I manually installed all the requirements, one by one, that weren't available in the epel-release repo. My process was the following:
wget https://rpmfind.net/linux/centos/8-stream/BaseOS/x86_64/os/Packages/rpm-4.14.3-19.el8.x86_64.rpm
wget https://rpmfind.net/linux/centos/8-stream/BaseOS/x86_64/os/Packages/rpm-libs-4.14.3-19.el8.x86_64.rpm
wget https://dl.rockylinux.org/pub/rocky/8/BaseOS/aarch64/os/Packages/s/selinux-policy-3.14.3-108.el8.noarch.rpm
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/libsemanage-2.9-9.el8.x86_64.rpm --allowerasing -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/policycoreutils-2.9-19.el8.x86_64.rpm -y
sudo rpm -i --force rpm-4.14.3-19.el8.x86_64.rpm
sudo rpm -i --force rpm-libs-4.14.3-19.el8.x86_64.rpm
sudo rpm -i --force selinux-policy-3.14.3-108.el8.noarch.rpm
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/python3-libsemanage-2.9-9.el8.x86_64.rpm -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/python3-policycoreutils-2.9-19.el8.noarch.rpm -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/policycoreutils-python-utils-2.9-19.el8.noarch.rpm -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/selinux-policy-minimum-3.14.3-108.el8.noarch.rpm -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/libseccomp-2.5.2-1.el8.x86_64.rpm -y
sudo yum install https://download-ib01.fedoraproject.org/pub/epel/8/Everything/x86_64/Packages/s/snapd-selinux-2.57.6-2.el8.noarch.rpm -y
sudo yum install snapd -y
sudo yum update snapd -y
It's conceivable that on your system something else will be missing. If you run into an error telling you that nothing provides package XYZ, you can find it here: https://centos.pkgs.org/8-stream/centos-baseos-x86_64/ and simply sudo yum install directly from the binary package URL; e.g.:
That's exactly what my process was, and here's what I have now:
$ cat /etc/redhat-release (base)
Red Hat Enterprise Linux release 8.2 (Ootpa)
$ snap --version (base)
snap 2.57.6-2.el8
snapd 2.52.1
series 16
rhel 8.2
kernel 4.18.0-193.6.3.el8_2.x86_64
Please help me.
i have try out alot of way to get install, upgrade my python3.7 to python3.9 yet it keep shows up error.
sudo apt-get install python3
(Python3 is already the newest version [3.7.3-1])
sudo apt-get upgrade python3
(Python3 is already the newest version [3.7.3-1])
sudo add-apt-repository ppa:deadsnakes/ppa
(file "/user/bin/add-apt-repository", line 95, in )
(sp = SoftwareProperties(options=options)
(....)
(Error: could not find a distribution template for Raspbian/buster)
sudo apt-get install build-essential python-dev libsqlite3-dev libreadline6-dev libgdbm-dev zlib1g-dev libbz2-dev sqlite3 zip
(after install 2 newly package)
sudo apt-get install python3 python3-dev
(still back to python3.7)
anyone know how to make it to python3.9?
you have to type this in terminal:
sudo apt install python3.9
but you never can upgrade your Linux python to a newer version. It is internal.
but you can install python3.9 and use virtualenv to use your code in python3.9
To upload the raw-reads > 2GB to SRA on Genebank, I installed aspera connect plug-in on ubuntu 16.04. But the plug-in did not pop up as indicated by the instruction on the genebank SRA portal.
I got this error on the terminal as I initializing the plug-in locally (~/.aspera/connect/bin/asperaconnect):
lib/libstdc++.so.6: version `GLIBCXX_3.4.20' not found (required by /usr/lib/x86_64-linux-gnu/libproxy.so.1)
Failed to load module: /usr/lib/x86_64-linux-gnu/gio/modules/libgiolibproxy.so
I followed some of the threads, created a link to /usr/lib/libstdc++.so.6 But it did not address the problem, still showing the error message above.
running strings /usr/lib/libstdc++.so.6 | grep GLIBCXX got this:
strings /usr/lib/x86_64-linux-gnu/libstdc++.so.6 | grep GLIBCXX
GLIBCXX_3.4
GLIBCXX_3.4.1
GLIBCXX_3.4.2
GLIBCXX_3.4.3
GLIBCXX_3.4.4
GLIBCXX_3.4.5
GLIBCXX_3.4.6
GLIBCXX_3.4.7
GLIBCXX_3.4.8
GLIBCXX_3.4.9
GLIBCXX_3.4.10
GLIBCXX_3.4.11
GLIBCXX_3.4.12
GLIBCXX_3.4.13
GLIBCXX_3.4.14
GLIBCXX_3.4.15
GLIBCXX_3.4.16
GLIBCXX_3.4.17
GLIBCXX_3.4.18
GLIBCXX_3.4.19
GLIBCXX_3.4.20
GLIBCXX_3.4.21
GLIBCXX_3.4.22
GLIBCXX_3.4.23
GLIBCXX_DEBUG_MESSAGE_LENGTH
GLIBCXX_3.4.20 is in the list. I don't know how to make the plug-in recognize that.
Thank you,
Xp
Here's a solution for this problem in Ubuntu 16.04
sudo add-apt-repository ppa:ubuntu-toolchain-r/test
sudo apt-get update
sudo apt-get install gcc-4.9
sudo apt-get upgrade libstdc++6
You can check if you get GLIBCXX desired version like this:
strings /usr/lib/x86_64-linux-gnu/libstdc++.so.6 | grep GLIBCXX
I solved problem like this (but GLIBCXX_3.4.21 on CentOS) but it is not dependent from os. The library is part of gcc compiler so need to install or compile appropriate version of gcc. This is table of versions of gcc and versions of appropriate libstdc++:
GCC 4.9.0: libstdc++.so.6.0.20
GCC 5.1.0: libstdc++.so.6.0.21
GCC 6.1.0: libstdc++.so.6.0.22
GCC 7.1.0: libstdc++.so.6.0.23
GCC 7.2.0: libstdc++.so.6.0.24
GCC 8.0.0: libstdc++.so.6.0.25
( full list of versions is here )
It is not dependent from how to install gcc - it may be installed from package or compiled and installed from sources.
It is possible that system gcc libraries is available instead of newely installed. So need to specify environment variable where to find libraries for example in command line like this:
$ LD_LIBRARY_PATH=/usr/local/lib64 command args ...
Considering that /usr/lib/x86_64-linux-gnu/libproxy.so.1 is supplied by Ubuntu, let's assume that it is compatible with the system libstdc++ library. This means that the application is not actually using that system library, but some other version. I'd suggest to check if the application sets LD_LIBRARY_PATH and if there is another copy of libstdc++.so.6 on that path. In this case, try moving it away or deleting it—the application should then switch to the system library, which is newer and should be backwards-compatible.
I also ran into this while installing h3.
The answer by oklas helped me, but expanding on that answer.
The gcc version with conda install -c anaconda gcc is 4.8.5. It is not compatible with the libstdc++.so.6.0.22. So I uninstalled it and installed a specific verision of gcc (ver 6) and it solved my problem.
answer for lazy ppl
this should fix situation in most cases
apt-get update && apt-get install sudo && \
sudo apt-get install build-essential software-properties-common -y && \
sudo add-apt-repository ppa:ubuntu-toolchain-r/test -y && \
sudo add-apt-repository ppa:george-edison55/cmake-3.x -y && \
sudo apt-get update && \
sudo apt-get install gcc-snapshot -y && \
sudo apt-get update && \
sudo apt-get install gcc-6 g++-6 -y && \
sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-6 60 --slave /usr/bin/g++ g++ /usr/bin/g++-6 && \
sudo apt-get install gcc-4.8 g++-4.8 -y && \
sudo update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-4.8 40 --slave /usr/bin/g++ g++ /usr/bin/g++-4.8 && \
sudo update-alternatives --config gcc && \
sudo apt-get update && \
sudo apt-get install cmake -y;
I am trying to install all requirements of a project so i run the command
pip install -r requirements.txt
but it gives the error
Downloading/unpacking psycopg2==2.6 (from -r requirements.txt (line 58))
Downloading psycopg2-2.6.tar.gz (367kB): 367kB downloaded
Running setup.py (path:/tmp/pip_build_root/psycopg2/setup.py) egg_info for package psycopg2
Error: b'You need to install postgresql-server-dev-X.Y for building a server-side extension or libpq-dev for building a client-side application.\n'
Complete output from command python setup.py egg_info:
running egg_info
creating pip-egg-info/psycopg2.egg-info
writing top-level names to pip-egg-info/psycopg2.egg-info/top_level.txt
writing pip-egg-info/psycopg2.egg-info/PKG-INFO
writing dependency_links to pip-egg-info/psycopg2.egg-info/dependency_links.txt
writing manifest file 'pip-egg-info/psycopg2.egg-info/SOURCES.txt'
warning: manifest_maker: standard file '-c' not found
Error: b'You need to install postgresql-server-dev-X.Y for building a server-side extension or libpq-dev for building a client-side application.\n'
----------------------------------------
Cleaning up...
Command python setup.py egg_info failed with error code 1 in /tmp/pip_build_root/psycopg2
Storing debug log for failure in /home/admin/.pip/pip.log
now i knew that i have to install postgresql-server so i used following command
sudo apt-get install postgresql
all good till now and then i ran
sudo apt-get install python-psycopg2
and then i ran my command to install requirements again but got the same error and then i searched on google and tried
sudo apt-get install libpq-dev
but i got following error
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
libpq-dev : Depends: krb5-multidev but it is not going to be installed
Depends: comerr-dev but it is not going to be installed
E: Unable to correct problems, you have held broken packages.
now i am unable to detect and correct broken package...please help me...
I ran the following commands to repair broken package and then i successfully installed Psycopg2 and Postgresql ...
sudo apt-get update
sudo apt-get install python-dev
sudo apt-get install libpq-dev
sudo apt-get install krb5-multidev
sudo apt-get install libssl1.0.0=1.0.1f-1ubuntu2 ibcomerr2=1.42.9-3ubuntu1
sudo apt-get install libssl1.0.0=1.0.1f-1ubuntu2
sudo apt-get install ibcomerr2=1.42.9-3ubuntu1
sudo apt-get update
sudo apt-get install libpq-dev
apt-get install libssl-dev krb5-multidev comerr-dev
sudo apt-get install libssl-dev krb5-multidev comerr-dev
sudo apt-get dist-upgrade
sudo apt-get update
sudo apt-get install libssl-dev krb5-multidev comerr-dev
sudo apt-get install libcomerr2
sudo apt-get install comerr-dev
sudo apt-get install libcomerr2
sudo apt-get install comerr-dev
sudo apt-get install comerr-dev
sudo apt-get install 1.42.9-3ubuntu1.3
sudo apt-get install ibcomerr2=1.42.9-3ubuntu1
sudo apt-get install git
git clone https://github.com/kos0/addRemoveDistribution.git
cd addRemoveDistribution
sudo ./enableDisableDistribution.pl enable security
sudo ./enableDisableDistribution.pl enable updates
sudo apt-get update
sudo apt-get install libpq-dev
sudo apt-get update
pip install -r requirements.txt
Just follow only Steps
sudo apt-get install git
git clone https://github.com/kos0/addRemoveDistribution.git
cd addRemoveDistribution
sudo ./enableDisableDistribution.pl enable security
sudo ./enableDisableDistribution.pl enable updates
sudo apt-get update
sudo apt-get install libpq-dev
sudo apt-get update
I Fixed issue by those above steps
I am using CDH 5.4. I see the version of HUE is 3.7.
I want to use Spark notebook feature in HUE 3.8 but I do not know how to upgrade HUE to 3.8
I find the instruction how to update HUE at HUE wiki page. It is removed now so I place my update bash script here
#!/bin/bash
CDH_LIB=/opt/cloudera/parcels/CDH/lib
# Download tarball
wget https://dl.dropboxusercontent.com/u/730827/hue/releases/3.8.1/hue-3.8.1.tgz
# Backup old version
sudo mv $CDH_LIB/hue $CDH_LIB/hue-3.7
# Install libs
sudo apt-get -y install python2.7-dev
sudo apt-get -y install libxslt1-dev
sudo apt-get -y install libmysqlclient-dev
sudo apt-get -y install libsqlite3-dev
sudo apt-get -y install make
sudo apt-get -y install libkrb5-dev
sudo apt-get -y install libxml2-dev
sudo apt-get -y install libssl-dev
sudo apt-get -y install libldap2-dev
sudo apt-get -y install python-pip
sudo apt-get -y install libsasl2-dev
sudo apt-get -y install python-ldap
tar -zxvf hue-3.8.1.tgz
cd hue-3.8.1/
#sudo rm -rf /opt/cloudera/parcels/CDH/lib/hue
# Build
sudo PREFIX=$CDH_LIB make install
# Copy configs
sudo rsync -aL $CDH_LIB/hue-3.7/desktop/conf/ $CDH_LIB/hue/desktop/conf/
# Copy db
sudo cp $CDH_LIB/hue-3.7/desktop/desktop.db $CDH_LIB/hue/desktop/desktop.db
# Sync db
sudo $CDH_LIB/hue/build/env/bin/hue syncdb
sudo $CDH_LIB/hue migate